65-0583-44 Constant flow pump Peristaltic tube pump Low flow rate MP-2110
Features
- Standard Tube Pump, Stable Flow Rate
- Roller Set with High Discharge Pressure and High Flow Rate Stability
- The tube case is available with screw tightening adjustment and fixed width groove type.
- The roller set is integrated and easy to put on and take off.
- The stopper at both ends of the tube case has a locking mechanism. The tube can be easily moved and changed since it can be locked at the time of setting.
- A wide range of characteristics can be obtained by adding and changing tube cases.
- The rotation direction of forward rotation and reverse rotation can be easily switched by a single switch.
- High discharge accuracy and excellent flow rate repeatability. It is also suitable for feeding a small amount of liquid.
- A tube adapter and a dedicated short tube are available for optional use while replacing consumable tubes.
- The MP-2110 type has tubes up to 3~6.1 mm in outside diameter, and can be routed to 4 locations simultaneously.
- By replacing the tube case, it is possible to change to MP-2001 series (spring type tube case).
Spec
- Type: Low Flow
- Tube holding system: screw variable
- Performance:
- Flow rate range: 0.5 ~ 72.5 mL/h x 4
- Flow rate accuracy: within +/- 2% (repeatability: within +/- 1%)
- Maximum discharge pressure: 196 kPa (2 kg/cm2)
- Maximum suction pressure: 9.8 kPa (0.1 kg/cm 2)
- Liquid viscosity/temperature: Max. 2 Pa/s (2000 cP)/0 ~ 60 degrees C (non-freezing)
- Features:
- rotation settings: volume settings
- Liquid feeding direction: Forward/reverse switchable
- Configuration:
- Motor: AC speed control induction motor output 15 W
- Driving circuit: Speed feedback control
- Tube case: PET resin
- Safety features: Thermal protector, fuse
- Standard:
- Number of tubes: 4
- Number of tube case tiers: 2 tiers
- Usable tube materials: Silicon, Tygon ®, Versilon (Fullan ®), Pharmed ®
- Usable tube diameter: outer diameter 3 ~ 6.1 mm
- Operating ambient temperature range: 0 ~ 40 degrees Celsius (noncondensing)
- External dimensions (mm): 137 (166) W x 145 (164) D x 206 (219) H
- Mass: About 3.5 kg
- Power input/voltage: 0.4 A, 40 VA/AC 100 V 50/60 Hz
- *Performance is measured at room temperature of 20 degrees Celsius, rated power supply voltage, water, liquid temperature of 18 degrees Celsius, back pressure of 0, and specified silicon tube.
- *Tubes sold separately. Performance such as flow rate and discharge pressure varies slightly depending on the tube used.
- *If the viscosity of the liquid used exceeds 0.1 Pa s (100 cP), the discharge may decrease.
- *Dimensions in parentheses include projections.
- Code: 252640
| Order No. | 65-0583-44 | |
|---|---|---|
| Model No. | MP-2110 | |
| JAN Code | 4573528548850 | |
| Standard price |
JPY: 140,000
USD: 877.58
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1unit | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
