65-0576-23 Aluminum block catalyst screening container with stirrer for constant temperature bath 1.5 ~ 7.0 mL x 6 HIP-7506
Features
- Rapid and Economical Catalytic Reaction Screening Container for Reducing the Cost of Combichem Synthesis
- SynFlexTM Catalyst screening container for aluminum block thermostatic bath with stirrer. By using this container, atmospheric pressure and high-pressure reaction screening can be easily performed.
- Since high-throughput screening can be performed easily, the cost of equipment installation during large-scale research can be reduced.
- The container has a temperature sensor insertion hole for monitoring and controlling the temperature. Reflux of the cold finger prevents solvent loss.
- The vial can be set in the vessel hole in a short time to achieve a uniform temperature in the atmosphere.
- After manual gas replacement (vacuuming + inert gas filling) with a ball valve and a pressure gauge, reactant gases (such as hydrogen) can be filled.
Spec
- Composite Scale: 1.5 ~ 7.0 ml x 6
- Maximum working pressure: 5 MPa (at 230 degrees C)
- Container dimensions (mm): diameter 75 (cylindrical part)
- Operating temperature range: Room temperature to 230 degrees Celsius (excluding when using septum)
- Stirring system: Magnetic stirrer (RCH -1000 type)
- Features:
- Reflux: Cold finger (return with tap or cooling water)
- Gas replacement: Ball valve (3-way type for switching) + pressure gauge
- Pressure indication and relief valve: Filling of reactant gas after purging - 100/0/2400 kPa, Relief adjustment range: 0.34 ~ 2.41 MPa
- Standard:
- Others: With temperature sensor insertion hole, positioning hole
- Container dimensions (mm): height 110 (without protrusions), body cylinder: phi 75 x 44 H
- Vial: 10 mL vial
- Dimensions (mm): phi 20 x 70 H with TS 14/23
- Stirrer dimensions (mm): phi 5 x 15
- Connection Diameter: Cold Water Connection Port/Purge Port: Outer Diameter 7.62 mm Hose Port, Reactive Gas Inlet: Outer Diameter 1.58 mm (1/16 ") Hose made of SUS 316
- Wetted part materials: SUS 316 (Body, Cover), Viton (O-ring), EPDM (relief valve seal), Glass (vial)
- *Use a single-holder BBS -1 HLD to heat the container.
- *The O-ring made by Perfro ® needs to be replaced for temperatures above 200 degrees Celsius.
- *The EPDM O-ring must be replaced when circulating cooling water below 0 degrees Celsius.
- *Vials and stirrers are sold separately.
- *Depending on the sample and conditions of use, this may fall under the Ministry of Economy, Trade and Industry's High Pressure Gas Safety Act.
- *Reflux at low temperatures requires a cooling water circulator.
- *Conversion of the pressure gauge and spring kit is required to operate at 5 MPa.
- Code: 248370
Package size：260×190×230 mm 3.5 kg [About Package size]
| Order No. | 65-0576-23 | |
|---|---|---|
| Model No. | HIP-7506 | |
| JAN Code | 4573528547402 | |
| Standard price |
JPY: 287,000
USD: 1,799.04
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1unit | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-0576-23 | Aluminum block catalyst screening container with stirrer for constant temperature bath 1.5 ~ 7.0 mL x 6 HIP-7506 | HIP-7506 |
|
1unit | JPY: 287,000 | USD: 1,799.04 |
|
 |
65-0576-24 | Aluminum block catalyst screening container with stirrer for constant temperature bath: 0.3 ~ 1.3 mL x 18 HIP-7518 | HIP-7518 |
|
1unit | JPY: 297,000 | USD: 1,861.72 |
|
 |
65-0576-25 | Aluminum block catalyst screening container with stirrer for constant temperature bath: 0.1 ~ 0.8 mL x 24 HIP-7524 | HIP-7524 |
|
1unit | JPY: 319,000 | USD: 1,999.62 |
|
Related Products
1 / 1 ページ
