Features

• This is a tower-shaped USB tap with 8 insertion ports and 5 USB ports.
• With a USB port, you can charge your smartphone or tablet at the same time as your computer without using an AC adapter.
• The insertion port is equipped with a "dust prevention shutter" to prevent dust from entering when not in use.
• The inlet uses a thermosetting resin that is resistant to melting in the event of heat generation and is effective in preventing electric fires.
• The insertion ports are arranged 45 degrees from one level to the other, so even if a large plug such as an AC adapter is connected, it will not easily interfere with other insertion ports.
• Equipped with an element (varistor) that absorbs lightning surges up to 12500 V caused by induced lightning, it protects connected equipment. (* The maximum surge voltage of 12500 V is based on the JEC210/212 standard.). The performance deteriorates depending on the voltage and the number of times received. )
• (One company) Adopts a double coated cord conforming to the Japan Wiring System Industry Association Standard (JWDS0010). It is effective for preventing electric shock and fire caused by broken wires and broken coating.
• The cable can be taken out in the horizontal direction using a groove on the bottom as well as down.
• The grooves used to remove cables from the sides can be covered with mounted parts.
• The two-pin outlet plug is equipped with an insulating sleeve at the base of the pin, which is effective for preventing fires caused by tracking phenomena.
• Uses a 180° swingable outlet plug that is easy to install in tight spaces.
• It has 5 USB-A ports and can charge 5 compatible smartphones simultaneously. The 5 port total maximum output corresponds to 4.8 A and the 1 port maximum output corresponds to 2.4 A.
• The high-performance IC installed in the USB port is compatible with "Omakase charging," which allows you to identify the connected device and charge it at the appropriate output.
• By pulling out the leg parts stored in the bottom of the body, even if the weight balance is unbalanced by the connected adapter, it can be installed stably.
• The leg parts are equipped with anti-slip members to prevent the body from sliding sideways even when the connected cable is pulled.
• The leg parts have holes and can be temporarily fixed using the accessory screws.
• It is also equipped with a hole for temporary fixing on the bottom of the main body, and can be installed on a wall by hooking it to a screw head, etc.
• * Various cables required for charging using the USB port are not included, so please purchase them separately before use.
• Equipped with movable leg parts for fall prevention. Can be temporarily fixed with screws using the legs.