Features

• Equipped with a clip mechanism, it is a 2-pin type 3-piece tap that can be used between desks, etc.
• It is convenient to set up and use temporarily when teleworking or doing homework at a dining table where taps cannot be used permanently.
• Can be installed on 15~35 mm thick plates. When installing, make sure that the inlet is facing upward.
• The ground surface with the board is rubber type, which prevents scratches and prevents slipping.
• The lower grip is equipped with a 10 mm diameter hanging hole that can be hung on a hook on the wall when not in use.
• It is equipped with a "dust prevention shutter" to prevent dust from entering when the plug is not inserted.
• The insertion port uses a thermosetting resin with excellent heat resistance, which is difficult to melt in the event of heat generation, and is effective in preventing electric fires.
• In order to prevent interference with the adjacent insertion port even when a large plug such as an AC adapter is connected, the insertion port is arranged in the center and at both ends in different directions.
• Equipped with an element (varistor) that absorbs lightning surges up to 12500 V caused by induced lightning, it protects connected equipment. (* The maximum surge voltage of 12500 V is based on the JEC210/212 standard.). The performance deteriorates depending on the voltage and the number of times received. )
• The 2-pin type plug is equipped with an insulating sleeve that is effective in preventing fires caused by tracking phenomena.
• Uses a 180° swing plug for easy wiring in tight spaces.
• The power cord uses a double tethered cord that conforms to the Japan Wiring System Manufacturers Association (JWDS0010), which is effective in preventing electric shock and fire caused by broken wires and tearing.
• The clip shape allows easy temporary fixing to desks.