Features

• This is a Qi-compliant wireless rechargeable car holder that allows you to charge your car simply by holding a Qi-compatible smartphone in between.
• This is a certified product that conforms to the "Qi" international standard for wireless power supply established by the Wireless Power Consortium (WPC).
• * Elecom is a regular member of the Wireless Power Consortium.
• With a maximum output of 10 watts, it supports Galaxy's 10 watt fast charge, Apple's 7.5 watt fast charge, and the standard 5 watt standard.
• The hold arm automatically moves left and right, so you can install smartphones of various widths.
• Touch the touch sensor at the bottom of the Qi pad to open the arm, and the arm closes automatically when Qi charging starts.
• Since the position of the Qi coil can be adjusted, various smartphones can be charged.
• You can open and close the arm by pressing the side button short and stop the Qi charging function by pressing and holding it long, which is convenient when holding a terminal that does not support Qi.
• If the case is less than 3mm thick, it can be charged with the case attached.
• * Be sure to remove the case with a thickness of 3 mm or more, metal or magnetic case and cards before charging.
• * Even if the case is less than 3mm in thickness, it may not be able to be charged depending on the specifications and conditions.
• Adopts a ball joint that can freely adjust the angle, allowing you to easily adjust the angle of your smartphone.
• The strong gel suction cup type can be firmly fixed to the dashboard of a car.
• If it is a shallow shibo, it can be firmly fixed.
• * If the suction force of the suction cup becomes weak, washing with water will restore the suction force.
• A long arm type that can be freely adjusted in length and direction with a stretching arm that can extend about 50 mm and a mechanism that rotates the entire arm by 270°.
• The ball joint ospart can be mounted in either the top or bottom direction, so you can change it according to your preferred angle.
• It has an installation auxiliary plate to assist the suction cup installation on the dashboard with deep shibo.
• Two LEDs are mounted on the left and right sides of the holder so that you can see the charging status from the driver's and passenger's side.
• It comes with an alcohol pad which is convenient for wiping off dirt when installing the holder.
• A cigar charger with 2 USB ports and a total maximum output of 30 W is included and can be connected to the holder for wireless charging.
• Quick Charge (TM) 3.0 compatible ports can be charged up to 18 W (5 V/3A, 9 V/2A, 12 V/1.5 A).
• The other port can charge up to 12 W (5 V/2.4 A).
• The high-performance IC installed in the USB port automatically distinguishes between iPhone and Android devices, and supports "Omakase charging" for the fastest charging with optimal output.