64-8580-06 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Single Banjo KH4-M5
Features
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- The type with cover prevents spatter and dust from entering the inside of the joint.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
Spec
- Connection Diameter: M5 x 0.8
- Applicable Tube Outer Diameter D (mm): 4
- Hex Opposite Side (mm): 11
- Working pressure: 1 MPa
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Body: Brass + Electroless Nickel Plating, Seal Rubber: Hydrogenated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 809 -5835
| Order No. | 64-8580-06 | |
|---|---|---|
| Model No. | KH4-M5 | |
| Standard price |
JPY: 950
USD: 5.96
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
64-8580-01 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Single Banjo KH4-01 | KH4-01 | 1piece | JPY: 840 | USD: 5.27 |
|
|
 |
64-8580-06 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Single Banjo KH4-M5 | KH4-M5 | 1piece | JPY: 950 | USD: 5.96 |
|
|
 |
64-8580-12 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Single Banjo KH6-01 | KH6-01 | 1piece | JPY: 860 | USD: 5.39 |
|
|
 |
64-8580-14 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Single Banjo KH6-02 | KH6-02 | 1piece | JPY: 960 | USD: 6.02 |
|
|
 |
64-8580-16 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Single Banjo KH6-03 | KH6-03 | 1piece | JPY: 1,180 | USD: 7.40 |
|
|
 |
64-8580-30 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Single Banjo KH6-M5 | KH6-M5 | 1piece | JPY: 1,070 | USD: 6.71 |
|
|
 |
64-8580-32 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Single Banjo KH8-01 | KH8-01 | 1piece | JPY: 1,020 | USD: 6.39 |
|