64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
Features
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- No cover type.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
SpecSpec class="init">
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NIHON PISCO CO., LTD.
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
特徴
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- No cover type.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
仕様
- Connection Diameter: R 1/8
- Applicable Tube Outer Diameter D (mm): 6
- Hex Opposite Side (mm): 12
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Body: Brass + Electroless Nickel Plating, Seal Rubber: Hydrogenated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1226
-
Order No.
64-8576-33
Model No.
KD6-01-1
Standard price
JPY: 730
USD: 4.54
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product VariationsProduct Variations">
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NIHON PISCO CO., LTD.
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
特徴
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- No cover type.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
仕様
- Connection Diameter: R 1/8
- Applicable Tube Outer Diameter D (mm): 6
- Hex Opposite Side (mm): 12
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Body: Brass + Electroless Nickel Plating, Seal Rubber: Hydrogenated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1226
-
アズワン品番
64-8576-33
型番
KD6-01-1
標準価格
JPY: 730
USD: 4.54
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
Product image
アズワン品番
商品名
型番
入り数
Standard price
Valid price in Japan
Stock
[Supplier Stock]
64-8576-26
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-01-1
KD4-01-1
1piece
JPY: 650
USD: 4.04
64-8576-28
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-02-1
KD4-02-1
1piece
JPY: 680
USD: 4.23
64-8576-30
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-M5-1
KD4-M5-1
1piece
JPY: 710
USD: 4.42
64-8576-33
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
KD6-01-1
1piece
JPY: 730
USD: 4.54
64-8576-35
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-02-1
KD6-02-1
1piece
JPY: 760
USD: 4.73
64-8576-37
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-03-1
KD6-03-1
1piece
JPY: 810
USD: 5.04
64-8576-39
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-M5-1
KD6-M5-1
1piece
JPY: 790
USD: 4.92
64-8576-41
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-01-1
KD8-01-1
1piece
JPY: 820
USD: 5.10
64-8576-43
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-02-1
KD8-02-1
1piece
JPY: 830
USD: 5.16
This page is the page of Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ype for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1 【AXEL GLOBAL】 アズワン
Contact us
NIHON PISCO CO., LTD.
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
特徴
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- No cover type.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
仕様
- Connection Diameter: R 1/8
- Applicable Tube Outer Diameter D (mm): 6
- Hex Opposite Side (mm): 12
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Body: Brass + Electroless Nickel Plating, Seal Rubber: Hydrogenated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1226
-
アズワン品番
64-8576-33
型番
KD6-01-1
標準価格
JPY: 730
USD: 4.54
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
64-8576-26
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-01-1
KD4-01-1
1piece
JPY: 650
USD: 4.04
64-8576-28
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-02-1
KD4-02-1
1piece
JPY: 680
USD: 4.23
64-8576-30
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-M5-1
KD4-M5-1
1piece
JPY: 710
USD: 4.42
64-8576-33
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
KD6-01-1
1piece
JPY: 730
USD: 4.54
64-8576-35
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-02-1
KD6-02-1
1piece
JPY: 760
USD: 4.73
64-8576-37
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-03-1
KD6-03-1
1piece
JPY: 810
USD: 5.04
64-8576-39
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-M5-1
KD6-M5-1
1piece
JPY: 790
USD: 4.92
64-8576-41
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-01-1
KD8-01-1
1piece
JPY: 820
USD: 5.10
64-8576-43
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-02-1
KD8-02-1
1piece
JPY: 830
USD: 5.16
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
特徴
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- No cover type.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
仕様
- Connection Diameter: R 1/8
- Applicable Tube Outer Diameter D (mm): 6
- Hex Opposite Side (mm): 12
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Body: Brass + Electroless Nickel Plating, Seal Rubber: Hydrogenated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1226
| Order No. | 64-8576-33 | |
|---|---|---|
| Model No. | KD6-01-1 | |
| Standard price |
JPY: 730
USD: 4.54
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product VariationsProduct Variations">
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NIHON PISCO CO., LTD.
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
特徴
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- No cover type.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
仕様
- Connection Diameter: R 1/8
- Applicable Tube Outer Diameter D (mm): 6
- Hex Opposite Side (mm): 12
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Body: Brass + Electroless Nickel Plating, Seal Rubber: Hydrogenated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1226
-
アズワン品番
64-8576-33
型番
KD6-01-1
標準価格
JPY: 730
USD: 4.54
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
Product image
アズワン品番
商品名
型番
入り数
Standard price
Valid price in Japan
Stock
[Supplier Stock]
64-8576-26
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-01-1
KD4-01-1
1piece
JPY: 650
USD: 4.04
64-8576-28
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-02-1
KD4-02-1
1piece
JPY: 680
USD: 4.23
64-8576-30
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-M5-1
KD4-M5-1
1piece
JPY: 710
USD: 4.42
64-8576-33
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
KD6-01-1
1piece
JPY: 730
USD: 4.54
64-8576-35
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-02-1
KD6-02-1
1piece
JPY: 760
USD: 4.73
64-8576-37
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-03-1
KD6-03-1
1piece
JPY: 810
USD: 5.04
64-8576-39
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-M5-1
KD6-M5-1
1piece
JPY: 790
USD: 4.92
64-8576-41
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-01-1
KD8-01-1
1piece
JPY: 820
USD: 5.10
64-8576-43
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-02-1
KD8-02-1
1piece
JPY: 830
USD: 5.16
This page is the page of Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ype for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1 【AXEL GLOBAL】 アズワン
Contact us
NIHON PISCO CO., LTD.
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
特徴
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- No cover type.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
仕様
- Connection Diameter: R 1/8
- Applicable Tube Outer Diameter D (mm): 6
- Hex Opposite Side (mm): 12
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Body: Brass + Electroless Nickel Plating, Seal Rubber: Hydrogenated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1226
-
アズワン品番
64-8576-33
型番
KD6-01-1
標準価格
JPY: 730
USD: 4.54
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
64-8576-26
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-01-1
KD4-01-1
1piece
JPY: 650
USD: 4.04
64-8576-28
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-02-1
KD4-02-1
1piece
JPY: 680
USD: 4.23
64-8576-30
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-M5-1
KD4-M5-1
1piece
JPY: 710
USD: 4.42
64-8576-33
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
KD6-01-1
1piece
JPY: 730
USD: 4.54
64-8576-35
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-02-1
KD6-02-1
1piece
JPY: 760
USD: 4.73
64-8576-37
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-03-1
KD6-03-1
1piece
JPY: 810
USD: 5.04
64-8576-39
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-M5-1
KD6-M5-1
1piece
JPY: 790
USD: 4.92
64-8576-41
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-01-1
KD8-01-1
1piece
JPY: 820
USD: 5.10
64-8576-43
Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-02-1
KD8-02-1
1piece
JPY: 830
USD: 5.16
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
特徴
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- No cover type.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
仕様
- Connection Diameter: R 1/8
- Applicable Tube Outer Diameter D (mm): 6
- Hex Opposite Side (mm): 12
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Body: Brass + Electroless Nickel Plating, Seal Rubber: Hydrogenated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1226
| アズワン品番 | 64-8576-33 | |
|---|---|---|
| 型番 | KD6-01-1 | |
| 標準価格 |
JPY: 730
USD: 4.54
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| Product image | アズワン品番 | 商品名 | 型番 | 入り数 | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
64-8576-26 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-01-1 | KD4-01-1 | 1piece | JPY: 650 | USD: 4.04 |
|
|
|
64-8576-28 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-02-1 | KD4-02-1 | 1piece | JPY: 680 | USD: 4.23 |
|
|
|
64-8576-30 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-M5-1 | KD4-M5-1 | 1piece | JPY: 710 | USD: 4.42 |
|
|
|
64-8576-33 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1 | KD6-01-1 | 1piece | JPY: 730 | USD: 4.54 |
|
|
|
64-8576-35 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-02-1 | KD6-02-1 | 1piece | JPY: 760 | USD: 4.73 |
|
|
|
64-8576-37 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-03-1 | KD6-03-1 | 1piece | JPY: 810 | USD: 5.04 |
|
|
|
64-8576-39 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-M5-1 | KD6-M5-1 | 1piece | JPY: 790 | USD: 4.92 |
|
|
|
64-8576-41 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-01-1 | KD8-01-1 | 1piece | JPY: 820 | USD: 5.10 |
|
|
|
64-8576-43 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-02-1 | KD8-02-1 | 1piece | JPY: 830 | USD: 5.16 |
|
This page is the page of Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ype for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1 【AXEL GLOBAL】 アズワン
64-8576-33 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1
特徴
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- No cover type.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
仕様
- Connection Diameter: R 1/8
- Applicable Tube Outer Diameter D (mm): 6
- Hex Opposite Side (mm): 12
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Body: Brass + Electroless Nickel Plating, Seal Rubber: Hydrogenated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1226
| アズワン品番 | 64-8576-33 | |
|---|---|---|
| 型番 | KD6-01-1 | |
| 標準価格 |
JPY: 730
USD: 4.54
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
|
64-8576-26 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-01-1 | KD4-01-1 | 1piece | JPY: 650 | USD: 4.04 |
|
|
|
64-8576-28 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-02-1 | KD4-02-1 | 1piece | JPY: 680 | USD: 4.23 |
|
|
|
64-8576-30 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD4-M5-1 | KD4-M5-1 | 1piece | JPY: 710 | USD: 4.42 |
|
|
|
64-8576-33 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-01-1 | KD6-01-1 | 1piece | JPY: 730 | USD: 4.54 |
|
|
|
64-8576-35 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-02-1 | KD6-02-1 | 1piece | JPY: 760 | USD: 4.73 |
|
|
|
64-8576-37 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-03-1 | KD6-03-1 | 1piece | JPY: 810 | USD: 5.04 |
|
|
|
64-8576-39 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD6-M5-1 | KD6-M5-1 | 1piece | JPY: 790 | USD: 4.92 |
|
|
|
64-8576-41 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-01-1 | KD8-01-1 | 1piece | JPY: 820 | USD: 5.10 |
|
|
|
64-8576-43 | Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Brauch Tee KD8-02-1 | KD8-02-1 | 1piece | JPY: 830 | USD: 5.16 |
|