64-8574-86 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-03
-
PrintPrintlass="init">
64-8574-86 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-03 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NIHON PISCO CO., LTD. 64-8574-86 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-03
Features
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- The type with cover prevents spatter and dust from entering the inside of the joint.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
Spec
- Connection Diameter: R 3/8
- Applicable Tube Outer Diameter D (mm): 8 x 8
- Hex Opposite Side (mm): 17
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Metal Book: Brass + Electroless Nickel Plating, Seal Rubber: Hydrated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1203
Order No.Order No.ss="init"> 64-8574-86 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-03 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NIHON PISCO CO., LTD. 64-8574-86 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-03
特徴
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- The type with cover prevents spatter and dust from entering the inside of the joint.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
仕様
- Connection Diameter: R 3/8
- Applicable Tube Outer Diameter D (mm): 8 x 8
- Hex Opposite Side (mm): 17
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Metal Book: Brass + Electroless Nickel Plating, Seal Rubber: Hydrated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1203
アズワン品番 64-8574-86 Model No. KB8-03 標準価格 JPY: 1,050 USD: 6.59 Excange rate 1USD= 159.42JPY
Valid price in Japan入り数 1piece 在庫数 
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image Order No. Name Model No. 入り数 標準価格 標準価格(ドル) アズワン在庫
[サプライヤ在庫]
64-8573-35 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB10-01 KB10-01 1piece JPY: 1,230 USD: 7.72 
64-8574-34 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB10-02 KB10-02 1piece JPY: 1,260 USD: 7.90 
64-8574-36 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB10-03 KB10-03 1piece JPY: 1,270 USD: 7.97 
64-8574-43 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB10-04 KB10-04 1piece JPY: 1,300 USD: 8.16 
64-8574-61 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB12-02 KB12-02 1piece JPY: 1,460 USD: 9.16 
64-8574-63 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB12-03 KB12-03 1piece JPY: 1,460 USD: 9.16 
64-8574-65 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB12-04 KB12-04 1piece JPY: 1,500 USD: 9.41 
64-8574-82 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-01 KB8-01 1piece JPY: 980 USD: 6.15 
64-8574-84 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-02 KB8-02 1piece JPY: 990 USD: 6.21 
64-8574-86 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-03 KB8-03 1piece JPY: 1,050 USD: 6.59 This page is the page of Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
64-8574-86 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-03 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NIHON PISCO CO., LTD. 64-8574-86 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-03
Features
- In addition to the main body, the open ring is made of brass, so it has excellent flame resistance and sputter resistance.
- The type with cover prevents spatter and dust from entering the inside of the joint.
- If the fluid used is hot medium oil, the hot medium oil may adhere to the open ring and the guide ring and solidify, resulting in a sliding failure, which may interfere with the open or lock function.
- When using, make sure that there is no adhesion of heat medium oil to the open ring/guide ring.
- When reconnecting the tube, make sure that the tube does not come out.
Spec
- Connection Diameter: R 3/8
- Applicable Tube Outer Diameter D (mm): 8 x 8
- Hex Opposite Side (mm): 17
- Fluid used: air, water (with conditions), heating medium oil (with conditions)
- Operating Temperature Range: 0 ~ 100 °C (Without Freezing)
- Maximum Working Pressure: 1.0 MPa
- Working vacuum pressure: -100 kPa
- Material/Finish: Metal Book: Brass + Electroless Nickel Plating, Seal Rubber: Hydrated Nitrile Rubber (HNBR)
- Country of origin: Japan
- Securities Code: 818 -1203
Order No. 64-8574-86 Model No. KB8-03 Standard price JPY: 1,050 USD: 6.59 Excange rate 1USD= 159.42JPY
Valid price in JapanQuantity 1piece Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]64-8573-35 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB10-01 KB10-01 1piece JPY: 1,230 USD: 7.72 64-8574-34 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB10-02 KB10-02 1piece JPY: 1,260 USD: 7.90 64-8574-36 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB10-03 KB10-03 1piece JPY: 1,270 USD: 7.97 64-8574-43 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB10-04 KB10-04 1piece JPY: 1,300 USD: 8.16 64-8574-61 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB12-02 KB12-02 1piece JPY: 1,460 USD: 9.16 64-8574-63 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB12-03 KB12-03 1piece JPY: 1,460 USD: 9.16 64-8574-65 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB12-04 KB12-04 1piece JPY: 1,500 USD: 9.41 64-8574-82 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-01 KB8-01 1piece JPY: 980 USD: 6.15 64-8574-84 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-02 KB8-02 1piece JPY: 990 USD: 6.21 64-8574-86 Brass Push-In Fitting Type for Spatter-Proof Tube Fitting Brass Series Tee KB8-03 KB8-03 1piece JPY: 1,050 USD: 6.59
