64-8420-08 Green G1 Chuck BBT30-GGC10-75
特徴
- Vibration damping structure is provided inside the holder to enable high feed of end mill in high speed and heavy cutting.
- The rigidity of the holder is increased, the surface roughness is good even in high speed and heavy cutting, and rough machining and finishing can be performed in one piece.
- The 1/10 taper and double taper system provide high grip strength, and the end mill does not fall out even in high speed and high feed machining.
- For end mill chucking.
- The blade tool adjustment amount is the numerical value when the length adjustment screw is used. (Sold Separately)
SpecSpec class="init">
64-8420-08 Green G1 Chuck BBT30-GGC10-75 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
YUKIWA SEIKO INC.
64-8420-08 Green G1 Chuck BBT30-GGC10-75
特徴
- Vibration damping structure is provided inside the holder to enable high feed of end mill in high speed and heavy cutting.
- The rigidity of the holder is increased, the surface roughness is good even in high speed and heavy cutting, and rough machining and finishing can be performed in one piece.
- The 1/10 taper and double taper system provide high grip strength, and the end mill does not fall out even in high speed and high feed machining.
- For end mill chucking.
- The blade tool adjustment amount is the numerical value when the length adjustment screw is used. (Sold Separately)
Spec
- Shank: BBT 30
- Grasp Diameter (mm): 2 ~ 10
- L (mm): 75
- Under Neck Diameter (mm): 31
- Tool Adjustment Amount (mm): 33 ~ 43
- Total run-out accuracy: 5 μm or less
- Country of origin: Japan
- Securities Code: 855 -8471
-
*This product might require extra fees.*This product might require extra fees.
64-8420-08 Green G1 Chuck BBT30-GGC10-75 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
YUKIWA SEIKO INC.
64-8420-08 Green G1 Chuck BBT30-GGC10-75
特徴
- Vibration damping structure is provided inside the holder to enable high feed of end mill in high speed and heavy cutting.
- The rigidity of the holder is increased, the surface roughness is good even in high speed and heavy cutting, and rough machining and finishing can be performed in one piece.
- The 1/10 taper and double taper system provide high grip strength, and the end mill does not fall out even in high speed and high feed machining.
- For end mill chucking.
- The blade tool adjustment amount is the numerical value when the length adjustment screw is used. (Sold Separately)
仕様
- Shank: BBT 30
- Grasp Diameter (mm): 2 ~ 10
- L (mm): 75
- Under Neck Diameter (mm): 31
- Tool Adjustment Amount (mm): 33 ~ 43
- Total run-out accuracy: 5 μm or less
- Country of origin: Japan
- Securities Code: 855 -8471
-
※この商品は別途費用が発生する場合があります。
Order No.
64-8420-08
型番
BBT30-GGC10-75
標準価格
JPY: 42,200
USD: 264.71
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockQuotes="init">
64-8420-08 Green G1 Chuck BBT30-GGC10-75 【AXEL GLOBAL】ASONE
Contact us
YUKIWA SEIKO INC.
64-8420-08 Green G1 Chuck BBT30-GGC10-75
Features
- Vibration damping structure is provided inside the holder to enable high feed of end mill in high speed and heavy cutting.
- The rigidity of the holder is increased, the surface roughness is good even in high speed and heavy cutting, and rough machining and finishing can be performed in one piece.
- The 1/10 taper and double taper system provide high grip strength, and the end mill does not fall out even in high speed and high feed machining.
- For end mill chucking.
- The blade tool adjustment amount is the numerical value when the length adjustment screw is used. (Sold Separately)
Spec
- Shank: BBT 30
- Grasp Diameter (mm): 2 ~ 10
- L (mm): 75
- Under Neck Diameter (mm): 31
- Tool Adjustment Amount (mm): 33 ~ 43
- Total run-out accuracy: 5 μm or less
- Country of origin: Japan
- Securities Code: 855 -8471
-
*This product might require extra fees.
Order No.
64-8420-08
Model No.
BBT30-GGC10-75
Standard price
JPY: 42,200
USD: 264.71
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
64-8420-08
Green G1 Chuck BBT30-GGC10-75
BBT30-GGC10-75
1piece
JPY: 42,200
USD: 264.71
64-8420-09
Green G1 Chuck BBT30-GGC12-75
BBT30-GGC12-75
1piece
JPY: 43,100
USD: 270.36
64-8420-10
Green G1 Chuck BBT30-GGC8-75
BBT30-GGC8-75
1piece
JPY: 41,100
USD: 257.81
64-8420-08 Green G1 Chuck BBT30-GGC10-75
特徴
- Vibration damping structure is provided inside the holder to enable high feed of end mill in high speed and heavy cutting.
- The rigidity of the holder is increased, the surface roughness is good even in high speed and heavy cutting, and rough machining and finishing can be performed in one piece.
- The 1/10 taper and double taper system provide high grip strength, and the end mill does not fall out even in high speed and high feed machining.
- For end mill chucking.
- The blade tool adjustment amount is the numerical value when the length adjustment screw is used. (Sold Separately)
Spec
- Shank: BBT 30
- Grasp Diameter (mm): 2 ~ 10
- L (mm): 75
- Under Neck Diameter (mm): 31
- Tool Adjustment Amount (mm): 33 ~ 43
- Total run-out accuracy: 5 μm or less
- Country of origin: Japan
- Securities Code: 855 -8471
*This product might require extra fees.*This product might require extra fees.
64-8420-08 Green G1 Chuck BBT30-GGC10-75 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
YUKIWA SEIKO INC.
64-8420-08 Green G1 Chuck BBT30-GGC10-75
特徴
- Vibration damping structure is provided inside the holder to enable high feed of end mill in high speed and heavy cutting.
- The rigidity of the holder is increased, the surface roughness is good even in high speed and heavy cutting, and rough machining and finishing can be performed in one piece.
- The 1/10 taper and double taper system provide high grip strength, and the end mill does not fall out even in high speed and high feed machining.
- For end mill chucking.
- The blade tool adjustment amount is the numerical value when the length adjustment screw is used. (Sold Separately)
仕様
- Shank: BBT 30
- Grasp Diameter (mm): 2 ~ 10
- L (mm): 75
- Under Neck Diameter (mm): 31
- Tool Adjustment Amount (mm): 33 ~ 43
- Total run-out accuracy: 5 μm or less
- Country of origin: Japan
- Securities Code: 855 -8471
-
※この商品は別途費用が発生する場合があります。
Order No.
64-8420-08
型番
BBT30-GGC10-75
標準価格
JPY: 42,200
USD: 264.71
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockQuotes="init">
64-8420-08 Green G1 Chuck BBT30-GGC10-75 【AXEL GLOBAL】ASONE
Contact us
YUKIWA SEIKO INC.
64-8420-08 Green G1 Chuck BBT30-GGC10-75
Features
- Vibration damping structure is provided inside the holder to enable high feed of end mill in high speed and heavy cutting.
- The rigidity of the holder is increased, the surface roughness is good even in high speed and heavy cutting, and rough machining and finishing can be performed in one piece.
- The 1/10 taper and double taper system provide high grip strength, and the end mill does not fall out even in high speed and high feed machining.
- For end mill chucking.
- The blade tool adjustment amount is the numerical value when the length adjustment screw is used. (Sold Separately)
Spec
- Shank: BBT 30
- Grasp Diameter (mm): 2 ~ 10
- L (mm): 75
- Under Neck Diameter (mm): 31
- Tool Adjustment Amount (mm): 33 ~ 43
- Total run-out accuracy: 5 μm or less
- Country of origin: Japan
- Securities Code: 855 -8471
-
*This product might require extra fees.
Order No.
64-8420-08
Model No.
BBT30-GGC10-75
Standard price
JPY: 42,200
USD: 264.71
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
64-8420-08
Green G1 Chuck BBT30-GGC10-75
BBT30-GGC10-75
1piece
JPY: 42,200
USD: 264.71
64-8420-09
Green G1 Chuck BBT30-GGC12-75
BBT30-GGC12-75
1piece
JPY: 43,100
USD: 270.36
64-8420-10
Green G1 Chuck BBT30-GGC8-75
BBT30-GGC8-75
1piece
JPY: 41,100
USD: 257.81
64-8420-08 Green G1 Chuck BBT30-GGC10-75
特徴
- Vibration damping structure is provided inside the holder to enable high feed of end mill in high speed and heavy cutting.
- The rigidity of the holder is increased, the surface roughness is good even in high speed and heavy cutting, and rough machining and finishing can be performed in one piece.
- The 1/10 taper and double taper system provide high grip strength, and the end mill does not fall out even in high speed and high feed machining.
- For end mill chucking.
- The blade tool adjustment amount is the numerical value when the length adjustment screw is used. (Sold Separately)
仕様
- Shank: BBT 30
- Grasp Diameter (mm): 2 ~ 10
- L (mm): 75
- Under Neck Diameter (mm): 31
- Tool Adjustment Amount (mm): 33 ~ 43
- Total run-out accuracy: 5 μm or less
- Country of origin: Japan
- Securities Code: 855 -8471
※この商品は別途費用が発生する場合があります。
| Order No. | 64-8420-08 | |
|---|---|---|
| 型番 | BBT30-GGC10-75 | |
| 標準価格 |
JPY: 42,200
USD: 264.71
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [Supplier StockQuotes="init">
64-8420-08 Green G1 Chuck BBT30-GGC10-75Features
Spec
*This product might require extra fees.
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|