ANDO KEIKI

64-5230-19　Overturning Type Rain Gauge with Heater Certified by Japan Meteorological Agency　AN-011-HK

Features

Falling Type Rain Gauge w/Heater, single item, Japan Meteorological Agency approved item
A recorder is required for measurement.
It is a fall type rain gauge feeling part for interval measurement.
It falls every certain amount (0.5 mm) of rainfall entering the water receiving port of 200 mm diameter, but the falling operation is detected by the reed switch, and the contact pulse signal is output.
Stable observation and measurement is possible for a long time.
Relatively easy to install.
The body part is made of stainless steel.
The rain gauge has a heater built in to prevent freezing for cold weather.
Heater power and grounding are required.

AN-011-HK (Falling Type Rain Gauge with Heater) Specifications
Heater: Heater Switch ON at Set Temperature 10 °C or Less Upper Heater: 100 VAC, 120 W
Lower Heater: 100 VAC, 160 W
Bore Diameter: 200 mm
(1) Falling rainfall: 0.5 mm
Sensitive Part: Chrome Plating Finish (For Falling)
Accuracy of measurement: within ± 0.5 mm for rainfall not exceeding 20 mm and within ± 3% for rainfall exceeding 20 mm.
Output signal: make-contact output by reed switch (0.11 ~ 0.13 seconds)
Outer Diameter: Approx. φ 226.6 x H 450 mm Mass: Approx. 5.0 kg
Body Material: Polycarbonate
Attached cord: 10 m
Contact Capacity: 3 VA (30 VDC/0.2 A MAX)
Operating temperature range: 0 ~ 50 °C (Do not freeze)

Order No.	64-5230-19
Model No.	AN-011-HK
Standard price	JPY: 218,000 USD: 1,356.40 Excange rate 1USD= 160.72JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock

Product image	Order No.	Name	Model No.		Quantity	Standard price	Valid price in Japan	Stock [Supplier Stock]
	64-5230-18	Overturning Type Rain Gauge with Heater　AN-011-H	AN-011-H		1piece	JPY: 204,000	USD: 1,269.29
	64-5230-19	Overturning Type Rain Gauge with Heater Certified by Japan Meteorological Agency　AN-011-HK	AN-011-HK		1piece	JPY: 218,000	USD: 1,356.40