Mitutoyo Corporation

64-3767-22　Replacement Anvil Type Micrometer/104-142/with Manufacturer calibration certificate + Traceability　OMC-400

Features

This product is a set of a calibration certificate, inspection report, and tresability system chart which were calibrated by the manufacturer.
By replacing the anvil, it is possible to increase the measurement range with one unit.
Standard: Spindle Surface Only with Carbide Alloy Chip
OMC-MX is a waterproof replaceable anvil type digital outer micrometer with a protection rating of IP65.
With Constant Pressure Device
[Note]
You will need the document address (company name and address) for your order.

measurement range (mm) : 300 to 400
Minimum Displayed Amount (mm): 0.01
Number of replacement anvils: 4
Number of base rods: 2
Bar breakdown: MB -325, 375 1 each
Stroke of micrometer head (mm): 25
IP 65 Protected grade
Level 6: Dust resistant. There shall be no intrusion of dust.
Level 5: Protection against jets (Water jet). The spouted water from the nozzle from any direction shall not have a detrimental effect.
Flatness: Maximum measuring length 300 mm or less/0.6 μm, Maximum measuring length 400 Exceeding mm but 1000 mm or less/1.0 μm
Quantization error: ± 1 count not included
Accessories: Reference Rod 1 piece (measurement range 0 to 25 Excluding mm), Spanner (No. 301336) 1 piece

Order No.	64-3767-22
Model No.	OMC-400
Standard price	JPY: 86,970 USD: 545.16 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock

Product image	Order No.	Name	Model No.		Quantity	Standard price	Valid price in Japan	Stock [Supplier Stock]
	64-3738-20	Replacement Anvil Type Micrometer/104-142/calibration certificate + Tressability System Diagram Attached　OMC-400	OMC-400		1piece	JPY: 86,970	USD: 545.16
	64-3767-22	Replacement Anvil Type Micrometer/104-142/with Manufacturer calibration certificate + Traceability　OMC-400	OMC-400		1piece	JPY: 86,970	USD: 545.16