Mitutoyo Corporation

64-3767-18　Replacement Anvil Type Micrometer/104-135/with Manufacturer calibration certificate + Traceability　OMC-150

特徴

This product is a set of a calibration certificate, inspection report, and tresability system chart which were calibrated by the manufacturer.
By replacing the anvil, it is possible to increase the measurement range with one unit.
Standard: Spindle Surface Only with Carbide Alloy Chip
OMC-MX is a waterproof replaceable anvil type digital outer micrometer with a protection rating of IP65.
With Constant Pressure Device
[Note]
You will need the document address (company name and address) for your order.

measurement range (mm) : 0 to 150
Minimum Displayed Amount (mm): 0.01
Number of replacement anvils: 6
Number of base rods: 3
Bar breakdown: MB -25, 75, 125 1 each
Stroke of micrometer head (mm): 25
IP 65 Protected grade
Level 6: Dust resistant. There shall be no intrusion of dust.
Level 5: Protection against jets (Water jet). The spouted water from the nozzle from any direction shall not have a detrimental effect.
Flatness: Maximum measuring length 300 mm or less/0.6 μm, Maximum measuring length 400 Exceeding mm but 1000 mm or less/1.0 μm
Quantization error: ± 1 count not included
Accessories: Reference Rod 1 piece (measurement range 0 to 25 Excluding mm), Spanner (No. 301336) 1 piece

アズワン品番	64-3767-18
型番	OMC-150
標準価格	JPY: 50,270 USD: 315.11 Excange rate 1USD= 159.53JPY Valid price in Japan
入り数	1piece
在庫数
サプライヤ在庫

商品イメージ	アズワン品番	商品名	型番		入り数	標準価格	標準価格(ドル)	アズワン在庫 [サプライヤ在庫]
	64-3738-15	Replacement Anvil Type Micrometer/104-135/calibration certificate + Tressability System Diagram Attached　OMC-150	OMC-150		1piece	JPY: 50,270	USD: 315.11
	64-3767-18	Replacement Anvil Type Micrometer/104-135/with Manufacturer calibration certificate + Traceability　OMC-150	OMC-150		1piece	JPY: 50,270	USD: 315.11