Mitutoyo Corporation

64-3745-70 Digimatic Caliper (551-301-20)/Manufacturer JCSS calibration certificate + Traceability CDN-P20

特徴

  • This product is a set of the JCSS calibration certificate and the tresability system diagram which were calibrated by the manufacturer.
  • Digital display up to 0.01 mm, can be read by anyone without error.
  • Since ABS (absolute) scale with absolute origin is built-in, zero set for each power ON is unnecessary. 
  • CDN-P/PPMX provides a protection rating of IP67. (It is not a water-resistant type, so it requires rust prevention treatment after use.)
  • There are output terminals for measurement data, and statistical process control systems and measurement systems can be configured.
  • When measured on the inner measuring surface of the digital specification, the measured value is the displayed value + the correction value displayed on the body. However, since the CDN-P20 has an offset function, when the OFFSET switch is pressed, the correction value is displayed and can be read directly. Since the CDN-P30PMX has a preset function in addition to the offset function, you do not need to convert the reading value if you press the PRESET switch and set the preset value in advance.
  • The tip of the measuring jaw for the outside is sharp, and you can easily measure the thin part.
  • [Note]
  • You will need the document address (company name and address) for your order.

Spec

  • measurement range (mm) : Outside/0 to 200 , Inside/20.1 to 210
  • Minimum Displayed Amount (mm): 0.01
  • Minimum inside measurement length (mm): 10.1
  • instrumental error (mm): ± 0.03
  • Quantization error: ± 1 count not included
  • power supply: Button Style Silver Oxide battery SR 44 (No. 938882) 1 piece Standard Included (The standard silver oxide button battery is for monitors.)
  • Position detection method: electromagnetic induction type absolute Encoder
  • maximum response speed: unlimited
  • Accessories: Storage Case
  •  
Order No. 64-3745-70
Model No. CDN-P20
Standard price JPY: 51,550 USD: 323.14
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity 1piece
在庫数
サプライヤ在庫

商品のバリエーション (サイズ違い・スペック違い・オプション品など)

商品イメージ アズワン品番 商品名 型番 QuantityQuantityass="init"> 64-3745-70 Digimatic Caliper (551-301-20)/Manufacturer JCSS calibration certificate + Traceability CDN-P20 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Mitutoyo Corporation

64-3745-70 Digimatic Caliper (551-301-20)/Manufacturer JCSS calibration certificate + Traceability CDN-P20

特徴

  • This product is a set of the JCSS calibration certificate and the tresability system diagram which were calibrated by the manufacturer.
  • Digital display up to 0.01 mm, can be read by anyone without error.
  • Since ABS (absolute) scale with absolute origin is built-in, zero set for each power ON is unnecessary. 
  • CDN-P/PPMX provides a protection rating of IP67. (It is not a water-resistant type, so it requires rust prevention treatment after use.)
  • There are output terminals for measurement data, and statistical process control systems and measurement systems can be configured.
  • When measured on the inner measuring surface of the digital specification, the measured value is the displayed value + the correction value displayed on the body. However, since the CDN-P20 has an offset function, when the OFFSET switch is pressed, the correction value is displayed and can be read directly. Since the CDN-P30PMX has a preset function in addition to the offset function, you do not need to convert the reading value if you press the PRESET switch and set the preset value in advance.
  • The tip of the measuring jaw for the outside is sharp, and you can easily measure the thin part.
  • [Note]
  • You will need the document address (company name and address) for your order.

仕様

  • measurement range (mm) : Outside/0 to 200 , Inside/20.1 to 210
  • Minimum Displayed Amount (mm): 0.01
  • Minimum inside measurement length (mm): 10.1
  • instrumental error (mm): ± 0.03
  • Quantization error: ± 1 count not included
  • power supply: Button Style Silver Oxide battery SR 44 (No. 938882) 1 piece Standard Included (The standard silver oxide button battery is for monitors.)
  • Position detection method: electromagnetic induction type absolute Encoder
  • maximum response speed: unlimited
  • Accessories: Storage Case
  •  
アズワン品番 64-3745-70
型番 CDN-P20
標準価格 JPY: 51,550 USD: 323.14
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity 1piece
在庫数
Supplier Stock

商品のバリエーション (サイズ違い・スペック違い・オプション品など)

商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
[Supplier StockSupplier Stock"init"> 64-3745-70 Digimatic Caliper (551-301-20)/Manufacturer JCSS calibration certificate + Traceability CDN-P20 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Mitutoyo Corporation

64-3745-70 Digimatic Caliper (551-301-20)/Manufacturer JCSS calibration certificate + Traceability CDN-P20

特徴

  • This product is a set of the JCSS calibration certificate and the tresability system diagram which were calibrated by the manufacturer.
  • Digital display up to 0.01 mm, can be read by anyone without error.
  • Since ABS (absolute) scale with absolute origin is built-in, zero set for each power ON is unnecessary. 
  • CDN-P/PPMX provides a protection rating of IP67. (It is not a water-resistant type, so it requires rust prevention treatment after use.)
  • There are output terminals for measurement data, and statistical process control systems and measurement systems can be configured.
  • When measured on the inner measuring surface of the digital specification, the measured value is the displayed value + the correction value displayed on the body. However, since the CDN-P20 has an offset function, when the OFFSET switch is pressed, the correction value is displayed and can be read directly. Since the CDN-P30PMX has a preset function in addition to the offset function, you do not need to convert the reading value if you press the PRESET switch and set the preset value in advance.
  • The tip of the measuring jaw for the outside is sharp, and you can easily measure the thin part.
  • [Note]
  • You will need the document address (company name and address) for your order.

仕様

  • measurement range (mm) : Outside/0 to 200 , Inside/20.1 to 210
  • Minimum Displayed Amount (mm): 0.01
  • Minimum inside measurement length (mm): 10.1
  • instrumental error (mm): ± 0.03
  • Quantization error: ± 1 count not included
  • power supply: Button Style Silver Oxide battery SR 44 (No. 938882) 1 piece Standard Included (The standard silver oxide button battery is for monitors.)
  • Position detection method: electromagnetic induction type absolute Encoder
  • maximum response speed: unlimited
  • Accessories: Storage Case
  •  
アズワン品番 64-3745-70
型番 CDN-P20
標準価格 JPY: 51,550 USD: 323.14
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数 1piece
在庫数
サプライヤ在庫

商品のバリエーション (サイズ違い・スペック違い・オプション品など)

商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
[サプライヤ在庫]
64-3745-67 Digimatic Caliper (551-204-10)/Manufacturer JCSS calibration certificate + Traceability CDN-50C CDN-50C 1piece JPY: 132,270 USD: 829.12

64-3745-68 Digimatic Caliper (551-206-10)/Manufacturer JCSS calibration certificate + Traceability CDN-75C CDN-75C 1piece JPY: 177,480 USD: 1,112.52

64-3745-69 Digimatic Caliper (551-207-10)/Manufacturer JCSS calibration certificate + Traceability CDN-100C CDN-100C 1piece JPY: 206,480 USD: 1,294.30

64-3745-70 Digimatic Caliper (551-301-20)/Manufacturer JCSS calibration certificate + Traceability CDN-P20 CDN-P20 1piece JPY: 51,550 USD: 323.14