Spec

• Brightness: Total luminous flux/1000 lm (when 100% brightness is on), * Can be changed from 100% to about 10% with the dimming function.
• Power consumption: 14.5 W at 100% brightness
• Main body dimensions: About 61 cm
• External dimensions: 32 (W) x 610 (L) x 7 (T) mm (maximum value)
• Weight: approximately 192 g
• Power: Input: 100 -240 VAC 50/60 Hz 1.0 A, Output: 24 VDC 1.2 A
• Light source: LED (daylight equivalent)
• Body cord length: about 0.5 m
• AC adapter cord length: about 1.8 m
• Material: ABS resin
• Location: Indoor
• Ra:80
• Operating temperature range: 10 ~ 40 degrees Celsius
• Waterproofing: None
• Accessories: 1 AC adapter, 2 magnet holders, 2 large (phi 2.8 x 19 mm) wood screws 2 small (phi 2.8 x 9.5 mm), 2 sleeves (phi 6 x 28 mm), 2 double-sided tapes (7.5 cm), 3 cord stickers, 1 end cap
• With contactless switch. (within a detection distance of 5 cm), you can turn the power on and off by simply holding your hand over the contactless switch, and you can continuously dim the light between maximum (100%) and minimum (about 10%) by holding your hand over the switch.
• Angle adjustable with included magnet holder. The angle can be changed in three steps.
• 1 optional coupler (61 cm) can be connected.
• Light guide plate is used to make it slim but evenly bright.
• Thin and slim, easy to install. (Magnet holder, double-sided tape, wood screws)
•