64-1881-20 Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V P01191762Z
Features
- Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate. The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762. Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( < 914-0034') 914-0034/ ) and with IP2X accessories ( < 914-0037') 914-0037/ ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g
SpecSpec class="init">
64-1881-20 Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V P01191762Z 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Chauvin Arnoux
64-1881-20 Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V P01191762Z
-
特徴
- Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate. The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762. Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( < 914-0034') 914-0034/ ) and with IP2X accessories ( < 914-0037') 914-0037/ ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g
SpecSpec class="init">
64-1881-20 Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V P01191762Z 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Chauvin Arnoux
64-1881-20 Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V P01191762Z
-
特徴
- Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate. The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762. Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( < 914-0034') 914-0034/ ) and with IP2X accessories ( < 914-0037') 914-0037/ ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g
Spec
- Quantity:1piece
- Maximum Voltage:690 V ac, 750 V dc
- Continuity Check:Yes
- Safety Category:CAT IV 600 V
- IP Rating:IP65
- Battery Type:AAA Battery, LR3 Battery
- Power Source:Battery
- Dimensions:163 x 64 x 40mm
- Weight:210g
- Height:40mm
- Length:163mm
- Maximum Operating Temperature:+45°C
- Safety Category Voltage:600V
- CODE No.:914-0034
-
Order No.
64-1881-20
Model No.
P01191762Z
Standard price
JPY: 23,500
USD: 146.22
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
64-1881-20 Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V P01191762Z
特徴
- Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate. The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762. Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( < 914-0034') 914-0034/ ) and with IP2X accessories ( < 914-0037') 914-0037/ ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g
SpecSpec class="init">
64-1881-20 Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V P01191762Z 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Chauvin Arnoux
64-1881-20 Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V P01191762Z
-
特徴
- Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate. The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762. Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( < 914-0034') 914-0034/ ) and with IP2X accessories ( < 914-0037') 914-0037/ ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g
Spec
- Quantity:1piece
- Maximum Voltage:690 V ac, 750 V dc
- Continuity Check:Yes
- Safety Category:CAT IV 600 V
- IP Rating:IP65
- Battery Type:AAA Battery, LR3 Battery
- Power Source:Battery
- Dimensions:163 x 64 x 40mm
- Weight:210g
- Height:40mm
- Length:163mm
- Maximum Operating Temperature:+45°C
- Safety Category Voltage:600V
- CODE No.:914-0034
-
Order No.
64-1881-20
Model No.
P01191762Z
Standard price
JPY: 23,500
USD: 146.22
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
64-1881-20 Chauvin Arnoux CA762 Voltage Indicator Continuity Check CAT IV 600 V P01191762Z
特徴
- Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate. The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages. Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762. Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( < 914-0034') 914-0034/ ) and with IP2X accessories ( < 914-0037') 914-0037/ ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads. Full integrated autotest Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC Single-pole phase test Phase sequence testing up to 400 Hz Input impedance >400 kΩ Continuity testing Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ Phase rotation, 2-wire method Removable test probe and cable Dimensions 163 x 64 x 40 mm IP65 protection rating Weight 210 g
Spec
- Quantity:1piece
- Maximum Voltage:690 V ac, 750 V dc
- Continuity Check:Yes
- Safety Category:CAT IV 600 V
- IP Rating:IP65
- Battery Type:AAA Battery, LR3 Battery
- Power Source:Battery
- Dimensions:163 x 64 x 40mm
- Weight:210g
- Height:40mm
- Length:163mm
- Maximum Operating Temperature:+45°C
- Safety Category Voltage:600V
- CODE No.:914-0034
| Order No. | 64-1881-20 | |
|---|---|---|
| Model No. | P01191762Z | |
| Standard price |
JPY: 23,500
USD: 146.22
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|