64-1030-01 Vacuum constant temperature dryer DRV622DC
Features
- Heaters are installed on the exterior of the interior and heated by radiation from the interior walls, allowing safe vacuum drying.
- Large tempered glass windows that are easy to observe inside the warehouse and polycarbonate protective plates are installed on the outside.
- Program operation can be set easily.
- In addition to the safety equipment provided with the temperature controller, a heat-sensitive independent overheat prevention device is installed to monitor and prevent overheating of the device in duplicate.
- The door can also be made as a special order item with the right opening opposite to the left opening (standard specification), so please specify when you order.
Spec
- convection formula: Radiation
- Operating temperature range (°C): 50 °C to 200 °C
- Temperature adjustment precision (°C): ± 1 °C at 200 °C
- Temperature rise time: about 120 minutes, from R.T. to 200 °C
- Vacuum operating range: 100 kPa to 0.13 kP (a vacuum standard)
- Ambient operating temperature: 5 °C, to 35 °C
- temperature controller: Microcomputer PID Control (TC-SVI System)
- Operation type: Standard Operation, Program Operation (maximum 100 steps) 1 minute, to 99 hours 59 minutes
- Temperature sensor: K class thermocouple
- Heater: Band heater
- Heater capacity (kW): 3.3 kW
- Vacuum Gauge: Bourdon Tube Type (0 kPa, to, -100, kPa)
- Interior: SUS304
- Door Packing: Silicone Rubber
- Safety device: Self-diagnostic function (Overheating, temperature sensor error, heater disconnection, SSR short circuit, ambient temperature error), independent overheat prevention device, control circuit protection fuse, key lock function, overcurrent/leakage breaker
- inner dimension [Effective Dimensions]: W 600 mm x D 600 mm x H 600 mm [H 567 mm]
- external dimensions ( mm ) : W 850 mm x D 855 mm x H 1,125 mm
- Internal volume (approx. L): approx. 216 L
- Observation Window: W 350 mm x H 350 mm tempered glass t 15 mm
- number of shelves/pitch: 6 stages/90 mm (Fixed Shelf Support)
- Vacuum Mouth: outer diameter 22 mm x L 40 mm (brass)
- Purge Port: Rc 3/8 (brass)
- power supply (50Hz/60Hz): 200 VAC Single-phase 16.5 A
- Required power supply Equipment: 200 VAC Single-Phase 30 A
- Mass (approx. kg): approx. 290 kg
- Accessories: shelf board 2 pieces, Rubber Elbow 1 piece, Fixed metal bracket 4 pieces (Mounting Screw 8 pieces)
Package size:850×855×1125 mm 300 kg [About Package size]
| Order No. | 64-1030-01 | |
|---|---|---|
| Model No. | DRV622DC | |
| Standard price |
JPY: -
USD: -
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1unit | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
![]() |
64-1030-01 | Vacuum constant temperature dryer DRV622DC | DRV622DC | 1unit | JPY: - | USD: - |
|
|
![]() |
64-1030-02 | Vacuum constant temperature dryer DRV623DC | DRV623DC | 1unit | JPY: - | USD: - |
|
|
![]() |
64-1030-03 | Vacuum constant temperature dryer DRV823FB | DRV823FB | 1unit | JPY: - | USD: - |
|




