64-0905-25 High Load tolerance Horizontal Arm CR-LA1701BK
Features
- You can move freely in all directions relative to the horizontal space.
- This arm is suitable for heavy items such as large monitors and medical monitors.
- Load capacity is 20 kg
- * When installing on a desk, etc., attach the monitor to a part that can withstand the weight of the monitor and the weight of the arm.
- Compatible with VESA standard installation. (75 x 75 mm, 100 x 100 mm) * * In the case of 75 mm, if there is a dent in the mounting position, it cannot be mounted.
- The hardness of each joint can be adjusted with an attached tool.
- The cable from the LCD can be passed through the cable holder on the lower surface of the arm.
Spec
- material : Steel (epoxy resin powder coating)
- Accessory: Adjustment Tool, Display Mounting Screw (M4 x 10)
- Total Load tolerance: 20
- Product Color: Black
- Required Tools: Phillips head screwdriver, glove
- Assembly Headcount: 1
- Assembly Time: 30
- Hex Wrench Size: 5
- Mounting method: Clamp
- Frame Color: Black
- Number of screens: 1
- Supported Monitor Sizes _ Maximum: 27
- Supported Monitors
- Weight : _ Max : 20,000
- Arm Movement Direction: Screen Rotation (rotation)/360 ° Screen Right/Left (bread)/180 ° Screen upper and lower (Tilt)/130 °
- strut size : 50
- Delivery Method: Knockdown Assembly Type
- Number of units: 1 inlet
- *Handling Precautions
- Do not install displays that exceed Load tolerance specifications.
- Since the stand itself is not fixed, it is easy to fall down depending on the position of the display. Please pay attention to the installation model and location.
- total with the arm on which the liquid crystal display is mounted
- Weight may weigh more than 6 kg. When assembling or working with the arm, be sure to use two or more people. ・The retention force of each arm and tilt joint at the factory differs depending on the product. After installing the arm, be sure to adjust the nut and bolt incorporated in the joint to obtain the optimum holding force. ・Operate the arm gently (Angle adjustment, etc.). Also, be sure to operate with both hands. Rough or repeated operation may damage the joint between the LCD and the arm or the base of the arm. ・If force is applied to the tip of the strut when fixing the screws, the desktop surface may be damaged. Therefore, take care not to apply force to the strength of the installation site. ・Do not place the LCD on the edge of the table or operate it in the direction of the edge of the table. If a downward force is applied to the LCD while it is overhanging, it may fall off the table. ・Do not install the product in areas subject to strong vibration or areas subject to continuous vibration for a long period of time. ・The assumed design operating environment temperature is 0 to 40 ° C. Do not use in an environment outside that range.
Package size：630×160×140 mm 5.18 kg [About Package size]
| Order No. | 64-0905-25 | |
|---|---|---|
| Model No. | CR-LA1701BK | |
| JAN Code | 4969887192771 | |
| Standard price |
JPY: 22,000
USD: 137.91
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1unit | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
64-0905-25 | High Load tolerance Horizontal Arm CR-LA1701BK | CR-LA1701BK | 1unit | JPY: 22,000 | USD: 137.91 |
|
|
 |
64-0905-26 | High Load tolerance Horizontal Arm CR-LA1702BK | CR-LA1702BK | 1unit | JPY: 24,000 | USD: 150.44 |
|