仕様

• Size: W 202 x D 298 x H 340
• Weight: 2.8 kg
• Packing: 1 inlet
• Ship Type: Knockdown Assembly
• material : strut/Aluminum , Pedestal , Bracket/Steel (epoxy resin powder coating)
• Accessory: Adjustment Tool, Display Mounting Screw (M4 x 12)
• Range of motion: Screen rotation (rotation)/360 ° Screen horizontal (bread)/180 °
• Total Load tolerance: 6 kg
• *Do not install a display that exceeds Load tolerance specifications. ・Since the stand itself is not fixed, it is easy to fall down depending on the position of the display. Please pay attention to the installation model and location.
• The total Weight with the LCD assembled arm may exceed 6 kg. When assembling or working with the arm, be sure to use two or more people.
• The retention force of each arm and tilt joint at the factory differs depending on the product.
• After installing the arm, be sure to adjust the nut and bolt incorporated in the joint to obtain the optimum holding force.
• Operate the arm gently (Angle adjustment, etc.). Also, be sure to operate with both hands.
• Rough or repeated operation may damage the joint between the LCD and the arm or the base of the arm.
• If force is applied to the tip of the strut when fixing the screws, the desktop surface may be damaged. Therefore, take care not to apply force to the strength of the installation site.
• Do not place the LCD on the edge of the table or operate it in the direction of the edge of the table. If a downward force is applied to the LCD while it is overhanging, it may fall off the table.
• Do not install the product in areas subject to strong vibration or areas subject to continuous vibration for a long period of time.
• The assumed design operating environment temperature is 0 to 40 ° C. Do not use in an environment outside that range.
•