64-0896-61 ［Discontinued］Arm-Type wall hanging metal bracket for liquid crystal plasma display CR-PLKG8
FeaturesFeatures class="init">
［Discontinued］Arm-Type wall hanging metal bracket for liquid crystal plasma display CR-PLKG8 64-0896-61 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SANWA SUPPLY INC.
64-0896-61 ［Discontinued］Arm-Type wall hanging metal bracket for liquid crystal plasma display CR-PLKG8
特徴
- The display bracket for wall mounting allows you to change the orientation of the display after installation on the wall.
- This arm type allows you to adjust the display orientation.
- The mounting hole position corresponds to VESA standard 200×200, 300×300, 400×400, 600×400.
- Tilt angle is 0° to 12°
- Up to 32~65 inch display can be installed.
- * Special technology is required to install this product, so please contact a specialist. Please do not do any construction work by the customer.
- 【 To Contractors 】
- Please make sure you understand the instruction manual before installing.
- For the safety of the customer, examine the wall surface professionally and determine the most suitable method of mounting with sufficient strength.
- The work must be carried out by at least two adults.
- Be sure to install all bolts and fixtures specified in the Owner's Manual.
- our company will not be liable for any accidents or damage caused by faulty installation or handling.
SpecSpec class="init">
［Discontinued］Arm-Type wall hanging metal bracket for liquid crystal plasma display CR-PLKG8 64-0896-61 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SANWA SUPPLY INC.
64-0896-61 ［Discontinued］Arm-Type wall hanging metal bracket for liquid crystal plasma display CR-PLKG8
特徴
- The display bracket for wall mounting allows you to change the orientation of the display after installation on the wall.
- This arm type allows you to adjust the display orientation.
- The mounting hole position corresponds to VESA standard 200×200, 300×300, 400×400, 600×400.
- Tilt angle is 0° to 12°
- Up to 32~65 inch display can be installed.
- * Special technology is required to install this product, so please contact a specialist. Please do not do any construction work by the customer.
- 【 To Contractors 】
- Please make sure you understand the instruction manual before installing.
- For the safety of the customer, examine the wall surface professionally and determine the most suitable method of mounting with sufficient strength.
- The work must be carried out by at least two adults.
- Be sure to install all bolts and fixtures specified in the Owner's Manual.
- our company will not be liable for any accidents or damage caused by faulty installation or handling.
仕様
- Size: W 664 x D 446 x H 430 mm
- Weight: 8.0 kg
- Packing: 1 pack
- Ship Type: Knockdown Assembly
- material : Steel (epoxy powder coating)
- Accessory: Display mounting screws (M4 x 12 , M5 x 12 , M6 x 12 , M8 16), each 4 pieces
- *If the bolt does not tighten all the way to the end, or if the bolt does not turn a little, or if the bolt does not fit you, please be careful about the strength and prepare an appropriate commercially available bolt.
- Load tolerance: 40 kg
-
Package size：700×248×130 mm 8.8 kg
[About Package size]
Order No.
64-0896-61
Model No.
CR-PLKG8
JAN Code
4969887159064
Standard price
JPY: 26,000
USD: 163.09
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1unit
Stock in Japan
-
64-0896-61 ［Discontinued］Arm-Type wall hanging metal bracket for liquid crystal plasma display CR-PLKG8
特徴
- The display bracket for wall mounting allows you to change the orientation of the display after installation on the wall.
- This arm type allows you to adjust the display orientation.
- The mounting hole position corresponds to VESA standard 200×200, 300×300, 400×400, 600×400.
- Tilt angle is 0° to 12°
- Up to 32~65 inch display can be installed.
- * Special technology is required to install this product, so please contact a specialist. Please do not do any construction work by the customer.
- 【 To Contractors 】
- Please make sure you understand the instruction manual before installing.
- For the safety of the customer, examine the wall surface professionally and determine the most suitable method of mounting with sufficient strength.
- The work must be carried out by at least two adults.
- Be sure to install all bolts and fixtures specified in the Owner's Manual.
- our company will not be liable for any accidents or damage caused by faulty installation or handling.
SpecSpec class="init">
［Discontinued］Arm-Type wall hanging metal bracket for liquid crystal plasma display CR-PLKG8 64-0896-61 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SANWA SUPPLY INC.
64-0896-61 ［Discontinued］Arm-Type wall hanging metal bracket for liquid crystal plasma display CR-PLKG8
特徴
- The display bracket for wall mounting allows you to change the orientation of the display after installation on the wall.
- This arm type allows you to adjust the display orientation.
- The mounting hole position corresponds to VESA standard 200×200, 300×300, 400×400, 600×400.
- Tilt angle is 0° to 12°
- Up to 32~65 inch display can be installed.
- * Special technology is required to install this product, so please contact a specialist. Please do not do any construction work by the customer.
- 【 To Contractors 】
- Please make sure you understand the instruction manual before installing.
- For the safety of the customer, examine the wall surface professionally and determine the most suitable method of mounting with sufficient strength.
- The work must be carried out by at least two adults.
- Be sure to install all bolts and fixtures specified in the Owner's Manual.
- our company will not be liable for any accidents or damage caused by faulty installation or handling.
仕様
- Size: W 664 x D 446 x H 430 mm
- Weight: 8.0 kg
- Packing: 1 pack
- Ship Type: Knockdown Assembly
- material : Steel (epoxy powder coating)
- Accessory: Display mounting screws (M4 x 12 , M5 x 12 , M6 x 12 , M8 16), each 4 pieces
- *If the bolt does not tighten all the way to the end, or if the bolt does not turn a little, or if the bolt does not fit you, please be careful about the strength and prepare an appropriate commercially available bolt.
- Load tolerance: 40 kg
-
Package size：700×248×130 mm 8.8 kg
[About Package size]
Order No.
64-0896-61
Model No.
CR-PLKG8
JAN Code
4969887159064
Standard price
JPY: 26,000
USD: 163.09
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1unit
Stock in Japan
-
64-0896-61 ［Discontinued］Arm-Type wall hanging metal bracket for liquid crystal plasma display CR-PLKG8
特徴
- The display bracket for wall mounting allows you to change the orientation of the display after installation on the wall.
- This arm type allows you to adjust the display orientation.
- The mounting hole position corresponds to VESA standard 200×200, 300×300, 400×400, 600×400.
- Tilt angle is 0° to 12°
- Up to 32~65 inch display can be installed.
- * Special technology is required to install this product, so please contact a specialist. Please do not do any construction work by the customer.
- 【 To Contractors 】
- Please make sure you understand the instruction manual before installing.
- For the safety of the customer, examine the wall surface professionally and determine the most suitable method of mounting with sufficient strength.
- The work must be carried out by at least two adults.
- Be sure to install all bolts and fixtures specified in the Owner's Manual.
- our company will not be liable for any accidents or damage caused by faulty installation or handling.
仕様
- Size: W 664 x D 446 x H 430 mm
- Weight: 8.0 kg
- Packing: 1 pack
- Ship Type: Knockdown Assembly
- material : Steel (epoxy powder coating)
- Accessory: Display mounting screws (M4 x 12 , M5 x 12 , M6 x 12 , M8 16), each 4 pieces
- *If the bolt does not tighten all the way to the end, or if the bolt does not turn a little, or if the bolt does not fit you, please be careful about the strength and prepare an appropriate commercially available bolt.
- Load tolerance: 40 kg
Package size：700×248×130 mm 8.8 kg [About Package size]
| Order No. | 64-0896-61 | |
|---|---|---|
| Model No. | CR-PLKG8 | |
| JAN Code | 4969887159064 | |
| Standard price |
JPY: 26,000
USD: 163.09
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1unit | |
|
|
||
| Stock in Japan | - | |