64-0887-87 Personal computer auto switch for both USB PS/2 consoles 4: 1 SW-KVM4HVCN
Features
- 4 Port KVM Switch with Display Emulation Function, Supports both USB & PS/2 Consoles, and Can Share USB2.0 Hub
- You can switch between 4 PCs with 1 pair of keyboard/mouse displays.
- The keyboard and mouse support both USB and PS/2 by using the included USB-PS/2 conversion cable. Cross-interface connections such as USB for mouse and PS/2 for keyboard are also possible.
- A USB2.0 hub with 2 ports enables you to switch USB printers and other USB devices to multiple computers for sharing.
- Moreover, since it can be switched independently, it is possible to operate a USB device on another computer while working on another computer.
- Equipped with display emulation function (EDID readout circuit). By reading the EDID of the display and saving it to KVM, and responding to each port during DDC communication, there is no problem that the screen resolution changes or the screen size changes during rear startup.
- Speakers and microphones can be shared. The console device and speaker/microphone can be switched independently. While you are working on a computer, you can play music from another computer and check the work status by voice.
- The front panel also has a speaker microphone port. It is easy to connect and disconnect, so it is convenient when using IP phones such as Skype.
- Independent switching between KVM, USB hub and audio is possible.
- It emulates a keyboard port so that it can be fully booted without switching ports during a reboot (reboot).
- Includes mouse emulation. Widely compatible with mice equipped with multi-function buttons and functions.
- Equipped with OSD (On-Screen Display) function, each device can be easily switched independently, completely, and check the switching status.
- The resolution can be up to 2048 x 1536. It also supports wide screen resolution.
- Support for WindowsOS, MacOS, and Linux. It can also be used in environments with multiple OSs.
- It supports three switching methods: hot key, main body switch button, and OSD switch.
- You can also connect only a mouse or keyboard. (The display is directly connected to a computer.) • The all-in-one connector combines keyboard, mouse, and display signals. It is easy to connect and can be wired beautifully.
- You can use all functions just by connecting without installing any software.
- Equipped with autoscan function for monitoring all personal computers.
Spec
- personal computer Supported : DOS/V Desktop personal computer or Notebook personal computer , Apple Mac Series (Models with USB A connector, Mini D-Sub (HD) 15 pin display connector)
- Compatible keyboard: PS/2 keyboard, USB keyboard
- *Two, three, four.
- Compatible Mouse: PS/2 Mouse, USB Mouse
- *1, 4
- Supported displays: Multi-scan display with mini D-sub (HD) 15 pin connector
- Supported resolutions: resolutions up to 2048 x 1536 dots (DDC2B Support)
- Speakers and Microphones Supported: 3.5 mm Stereo Mini Plug Speakers and Microphones
- Compatible OS: Windows 8.1, 8, 7, Vista, XP (32/64 bit for each Editon) Windows Server 2012 (R2), Windows Server 2008 (R2), Windows Server 2003 (R2) Mac OSX, MacOS 9.0 or later Linux (CentOS, uBuntu, OpenSUSE)
- Interfaces
All-in-One Connectors SPHD 15 pin (Female) x 4 - *Integrated VGA/USB signal line Speaker: 3.5 mm Stereo minijack x 4 Microphone: 3.5 mm Stereo minijack x 4
Display: Mini D-Sub (HD) 15 pin female x 1 keyboard: USB A connector female x 1 Mouse: USB A connector female x 1 Speaker: 3.5 mm Stereo minijack x 2 Microphone: 3.5 mm Stereo minijack x 2 USB 2.0 Hub: USB A connector female x 2 - Switching method: body button switching, hot key switching, OSD switching, auto scan switching
- Switching tone: Beep code ON/OFF can be set
- power supply : AC Adapter (5.3 VDC, 2.4 A)
- Current consumption: 1.72 A (Maximum)
- Operating Temperature and Humidity: 0 to 50 ° C Humidity 85% or Less (No condensation)
- Storage Temperature/Humidity: -20 ° C to 60 ° C Humidity 90% or Less (No condensation)
- Size: W 200 x D 42 x H 70 mm
- Accessory: personal computer Cable (1.2 m x 2, 1.8 m x 2), AC Adapter (5.3 VDC, 2.4 A) x 1, USB-PS/2 Conversion Cable x 1, Simple Hotkey Table Seal, Instruction Manual (Guaranteed) Note
- *1 The mouse emulation function must be ON (Enabled) to use the switch mouse function.
- *2 The USB hub port on the keyboard cannot be used through this product. Functions that require a driver such as the special buttons included in keyboard cannot be used via this product.
- *3 keyboard with fingerprint authentication or keyboard with trackpad may not work.
- *4 Not compatible with Bluetooth keyboard and Blutooth mice.
- This product requires AC adapter connection. It does not operate in the disconnected state.
- Not all personal computer keyboard mice are guaranteed to work.
- The special buttons and function keys that require the driver to be installed on the keyboard or mouse may not work via this switch.
- The one-touch resume suspend function is not supported.
Package size：285×100×175 mm 1.85 kg [About Package size]
| Order No. | 64-0887-87 | |
|---|---|---|
| Model No. | SW-KVM4HVCN | |
| JAN Code | 4969887593295 | |
| Standard price |
JPY: 54,000
USD: 335.99
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
64-0887-80 | Personal computer auto switch for both USB PS/2 consoles 2: 1 SW-KVM2HVCN | SW-KVM2HVCN | 1piece | JPY: 36,000 | USD: 223.99 |
|
|
 |
64-0887-87 | Personal computer auto switch for both USB PS/2 consoles 4: 1 SW-KVM4HVCN | SW-KVM4HVCN | 1piece | JPY: 54,000 | USD: 335.99 |
|