Features

• A 9-unit AC adapter compatible tap that can be inserted from the left, right, and top.
• With tracking fire prevention swing plug, 2P/5 individual unit, 2 AC adapters connectable layout. Energy saving tap with tracking fire prevention swing plug. Features • Uses a layout that allows AC adapters to connect effortlessly.
• The connected devices can be turned on and off individually. (6 units) The remaining 3 units are always energized.
• The switch has a built-in lamp that lights when energized, so you can avoid forgetting to turn it off.
• The built-in circuit breaker works to prevent accidents when the allowable amount is exceeded.
• A swing plug with an insulating cap at the base of the plug blade that is effective in preventing tracking fires.
• [Built-in Circuit Breaker]
• If the total power consumption of connected devices exceeds 1500 W, the circuit breaker will operate and the power will be turned off. *The amount of time it takes to shut off depends on the amount of excess power consumption.
• < If the circuit breaker is activated >, remove the connected device from the tap, remove the device so that it is below 1500 W, and press the RESUME/CANCEL button.
• ~ Tracking fire ・・・ ~ If the plug is not plugged in or unplugged for a long time, dust, etc. may accumulate in the gap between the outlet and the plug, resulting in moisture. In this condition, if voltage is applied, leakage current may flow through the outlet surface and between the plug blades, causing a small spark discharge. As a result, the surface deteriorates, forming carbonized conductive paths (tracks) and causing breakdown. This phenomenon is called tracking. As a result, a sudden burst of flame may occur while the plug is in contact with the receptacle, causing a fire accident.