Features

Uses SUS303 which is excellent in durability and has remarkably long life compared to resin.
Because of the screw type, the holding strength is much improved compared to the resin coolant hose.
Since the holding strength is high, there is no change in the hose shape due to interference by high-pressure coolant, mechanical vibration, chips, etc.
For tool tip cooling during cutting and grinding.
The maximum operating pressure and maximum operating flow rate data are for the 1/4 system with the hose inner diameter φ5.8, and for the 1/2 system with the round nozzle tip diameter φ6.5.
The chemical resistance of the indicated fluid represents the chemical resistance of the product material itself and does not guarantee the chemical resistance of this product.

Spec

length (mm): 50.5
inner diameter (mm): 1/4
Nozzle inner diameter (mm): 22 × 4.0 slit
Nozzle Width (mm): 24
Nominal Size: 1/4
product name: Flare Nozzle Wide Jet Width 20 x thickness 4.0
Maximum pressure of use (MPa): 5
Suitable fluids: acetone, ammonia water, drinking water, ethanol, ethyl ether, gasoline, nitric acid, vegetable oil, sodium hydroxide, petroleum, cutting oil, kerosene, trichloroethylene, toluene, benzene
flow rate (L/min): 60
Type: Wide Jet
Usable temperature: -30 ° C to + 100 ° C
maximum working pressure (liquid) 5 Mpa
Best use flow rate to 60 l/min
material/Finish : SUS303
Country of origin: Switzerland
Code number: 160 -9089