63-7887-98 ［Discontinued］Back Film for iPhone 11/Impact Absorption/High Gloss PM-A19CFLFPGU
Features
- Fingerprint prevention type rear film that protects the back of iPhone 11, prevents fingerprints and sebum from getting stuck, and can be easily wiped off if left.
- This is an airless type that uses a special adsorption layer that reduces the appearance of air bubbles over time.
- When a small bubble is formed, you can remove it by pushing it out with your finger.
- Fingerprint and sebum stain are hard to stick, and even if they remain, they can be easily wiped off.
- The glossy, high-gloss type makes the back of the model look shiny and beautiful.
- In an experiment in which a 150 g iron ball was dropped from a height of 100 cm onto the glass, the glass panel of the conventional product was damaged, while the glass panel of this product was protected. *From Elekom's test results
- * From Elekom's hard ball drop test results on glass (actual value). It is a merit value and not a guarantee value.
- A self-adsorbing type that can be applied without using adhesive or double-sided tape by coating the surface with silicon film.
- Easy to paste and can be re-pasted.
- Antibacterial function is applied to the film to prevent bacterial growth.
- It is already cut to fit the shape of the terminal, so it can be used immediately after removing from the package. *Since the end of the terminal is curved, the curved part is not covered.
SpecSpec class="init">
［Discontinued］Back Film for iPhone 11/Impact Absorption/High Gloss PM-A19CFLFPGU 63-7887-98 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
ELECOM CO., LTD
63-7887-98 ［Discontinued］Back Film for iPhone 11/Impact Absorption/High Gloss PM-A19CFLFPGU
特徴
- Fingerprint prevention type rear film that protects the back of iPhone 11, prevents fingerprints and sebum from getting stuck, and can be easily wiped off if left.
- This is an airless type that uses a special adsorption layer that reduces the appearance of air bubbles over time.
- When a small bubble is formed, you can remove it by pushing it out with your finger.
- Fingerprint and sebum stain are hard to stick, and even if they remain, they can be easily wiped off.
- The glossy, high-gloss type makes the back of the model look shiny and beautiful.
- In an experiment in which a 150 g iron ball was dropped from a height of 100 cm onto the glass, the glass panel of the conventional product was damaged, while the glass panel of this product was protected. *From Elekom's test results
- * From Elekom's hard ball drop test results on glass (actual value). It is a merit value and not a guarantee value.
- A self-adsorbing type that can be applied without using adhesive or double-sided tape by coating the surface with silicon film.
- Easy to paste and can be re-pasted.
- Antibacterial function is applied to the film to prevent bacterial growth.
- It is already cut to fit the shape of the terminal, so it can be used immediately after removing from the package. *Since the end of the terminal is curved, the curved part is not covered.
仕様
- Compatible models : iPhone 11
- Comprises: 1 backside protective film (shock resistant, fingerprint-high gloss), 1 dust removal seal and 1 cleaning cloth.
- Material: Bonded Surface/Silicon, Outside/PET
-
Package size：80×2×185 mm
[About Package size]
Order No.
63-7887-98
Model No.
PM-A19CFLFPGU
JAN Code
4549550142922
Standard price
JPY: 1,470
USD: 9.22
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1sheet
![<!--@[ia-1]@-->取扱停止<!--@/[ia-1]@-->](/en/asone/img/usestop_en_US.png?v=03790be0f2ba82c1280907a7033cf49dabaaa7c1)
在庫数
-
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
QuantityQuantityass="init">
［Discontinued］Back Film for iPhone 11/Impact Absorption/High Gloss PM-A19CFLFPGU 63-7887-98 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
ELECOM CO., LTD
63-7887-98 ［Discontinued］Back Film for iPhone 11/Impact Absorption/High Gloss PM-A19CFLFPGU
特徴
- Fingerprint prevention type rear film that protects the back of iPhone 11, prevents fingerprints and sebum from getting stuck, and can be easily wiped off if left.
- This is an airless type that uses a special adsorption layer that reduces the appearance of air bubbles over time.
- When a small bubble is formed, you can remove it by pushing it out with your finger.
- Fingerprint and sebum stain are hard to stick, and even if they remain, they can be easily wiped off.
- The glossy, high-gloss type makes the back of the model look shiny and beautiful.
- In an experiment in which a 150 g iron ball was dropped from a height of 100 cm onto the glass, the glass panel of the conventional product was damaged, while the glass panel of this product was protected. *From Elekom's test results
- * From Elekom's hard ball drop test results on glass (actual value). It is a merit value and not a guarantee value.
- A self-adsorbing type that can be applied without using adhesive or double-sided tape by coating the surface with silicon film.
- Easy to paste and can be re-pasted.
- Antibacterial function is applied to the film to prevent bacterial growth.
- It is already cut to fit the shape of the terminal, so it can be used immediately after removing from the package. *Since the end of the terminal is curved, the curved part is not covered.
仕様
- Compatible models : iPhone 11
- Comprises: 1 backside protective film (shock resistant, fingerprint-high gloss), 1 dust removal seal and 1 cleaning cloth.
- Material: Bonded Surface/Silicon, Outside/PET
-
荷姿サイズ：80×2×185 mm
[荷姿サイズについて]
アズワン品番
63-7887-98
型番
PM-A19CFLFPGU
JANコード
4549550142922
標準価格
JPY: 1,470
USD: 9.22
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1sheet
在庫数
-
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
63-7887-98
［Discontinued］Back Film for iPhone 11/Impact Absorption/High Gloss PM-A19CFLFPGU
PM-A19CFLFPGU
1sheet
JPY: 1,470
USD: 9.22
-
63-7888-04
［Discontinued］Back Film/Impact Absorption/Mat for iPhone 11 PM-A19CFLFPU
PM-A19CFLFPU
1sheet
JPY: 1,470
USD: 9.22
-
63-7887-98 ［Discontinued］Back Film for iPhone 11/Impact Absorption/High Gloss PM-A19CFLFPGU
特徴
- Fingerprint prevention type rear film that protects the back of iPhone 11, prevents fingerprints and sebum from getting stuck, and can be easily wiped off if left.
- This is an airless type that uses a special adsorption layer that reduces the appearance of air bubbles over time.
- When a small bubble is formed, you can remove it by pushing it out with your finger.
- Fingerprint and sebum stain are hard to stick, and even if they remain, they can be easily wiped off.
- The glossy, high-gloss type makes the back of the model look shiny and beautiful.
- In an experiment in which a 150 g iron ball was dropped from a height of 100 cm onto the glass, the glass panel of the conventional product was damaged, while the glass panel of this product was protected. *From Elekom's test results
- * From Elekom's hard ball drop test results on glass (actual value). It is a merit value and not a guarantee value.
- A self-adsorbing type that can be applied without using adhesive or double-sided tape by coating the surface with silicon film.
- Easy to paste and can be re-pasted.
- Antibacterial function is applied to the film to prevent bacterial growth.
- It is already cut to fit the shape of the terminal, so it can be used immediately after removing from the package. *Since the end of the terminal is curved, the curved part is not covered.
仕様
- Compatible models : iPhone 11
- Comprises: 1 backside protective film (shock resistant, fingerprint-high gloss), 1 dust removal seal and 1 cleaning cloth.
- Material: Bonded Surface/Silicon, Outside/PET
Package size：80×2×185 mm [About Package size]
| Order No. | 63-7887-98 | |
|---|---|---|
| Model No. | PM-A19CFLFPGU | |
| JAN Code | 4549550142922 | |
| Standard price |
JPY: 1,470
USD: 9.22
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1sheet | |
|
|
||
| 在庫数 | - | |
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | QuantityQuantityass="init">
63-7887-98 ［Discontinued］Back Film for iPhone 11/Impact Absorption/High Gloss PM-A19CFLFPGU特徴
仕様
荷姿サイズ：80×2×185 mm [荷姿サイズについて]
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| |||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|