63-5534-68 Stirrer Eurostar400 control
Features
- Eurostar 400 control, a high viscosity agitator equipped with a wireless controller that can be operated remotely with an easy-to-read TFT digital display.
- Up to 150 L (vs H20) can be stirred.
- Electronically controlled stirrer with speed range 0/6 -2000rpm (2 different speed ranges).
- Equipped with RS232 and USB interface, all parameters can be recorded through PC and equipment can be operated. (Separate software required)
- Since the torque trend can be displayed, the viscosity change of the sample can be checked.
- Equipped with a safety circuit, the machine automatically stops when an excessive load is applied to the agitator.
- Even if the viscosity changes during stirring, the set speed is maintained, so the actual speed can be controlled automatically.
- Multilingual TFT display
- Program settings can be stored
- Temperature can be measured
- Interval function is provided to reduce agitation irregularity
- Timer function is provided
- Protection function that can be set
- Lock function is provided
- Speed is adjusted without step
- Stirring blades are chuck type and easy to remove.
- Equipped with overload prevention function.
- For High Viscosity, Centralized Stirring Work Possible
- Compact Motor Unit
- Quiet Drive
- Error Code Digital Display
- H 67.60 Temperature Sensor, WH 11 WiCo Holder (Standard Accessory)
Spec
- maximum processing volume (versus H2O) ( L ) : 150
- Motor output (W): 220
- Motor input (W): 176
- Main Drive: Brushless DC
- Rotation speed display: TFT
- rotation speed range (rpm) : 0/6 to 2000
- Reverse: no
- Intermittent operations: yes
- Maximum viscosity (mPas): 100,000
- Maximum power of agitation shaft (W): 167
- Duration (%): 100
- Maximum torque of agitation shaft (Ncm): 400
- Maximum torque (Gear I) (Ncm): 400
- Maximum torque (Gear II) (Ncm): 80
- rotation speed Range I (50Hz) (rpm) : 6 to 400
- rotation speed range II (50Hz) (rpm) : 30 to 2000
- rotation speed Range I: Minimum rotation speed (60Hz) (rpm): 6
- rotation speed Range I : Max rotation speed (60Hz) (rpm) : 400
- rotation speed Range I : Min rotation speed (60Hz) (rpm) : 30
- rotation speed range II : Max rotation speed (60Hz) (rpm) : 2000
- rotation speed control : Stepless
- Exact rotation speed setting (± rpm): 1
- rotation speed Measured Error (n > 300 rpm) (±%): 1
- rotation speed Measured Error (n < 300 rpm) (± rpm): 3
- Stirring Blade fastener: Chuck
- Mounting connector for temperature sensor: PT 1000
- Temperature Display: yes
- Fitting (O) (mm): 10
- Chuck Range (mm): 0.5 to 10
- Shaft through hole Diameter (mm): 10.3
- Shaft through hole (push-through when stopped): yes
- Stand Mounting: Extension Arm
- Diameter of support arm (mm): 16
- Length of the support arm (mm): 160
- Torque Display: yes
- Speed control: electronic
- Normal torque (Nm): 4
- torque measurements: trends
- Torque error (Gear I) (± Ncm): 40
- rotation speed Measured Error (Gear II) (± Ncm) : 12
- Timer: yes
- Timer display: TFT
- Timer setting range (min): 1 to 6000
- Temperature measurement range (degrees C): -10 to + 350
- Temperature measurement (K): 0.1
- Error in temperature measurement (K): Error ± 0.05 PT 1000 (DIN IEC 751 Class A)
- Tolerance (temperature sensor) (K): ≤ ± (0.15 + 0.002 xITI)
- Housing material: Aluminum Cast Coating/Thermoplastic Polymer
- Approved for use in clean rooms: no
- Explosion-Proof Specifications: no
- Maximum allowable communication distance (Depend on the building environment) (m): 150
- body size (W x H x D) (mm) : 114 x 320 x 268
- Weight (kg) : 8.2
- Permissible ambient temperature (degrees C): 5 to 40
- Permissible ambient humidity (%): 80
- DIN EN 60529 Standard protection class: IP 40
- USB interface: yes
- RS 232 interfaces: yes
- Analog output: no
- Voltage (V): 230
- Frequency (Hz): 50/60
- Output (W): 226
Package size：1100×400×350 mm 14 kg [About Package size]
| Order No. | 63-5534-68 | |
|---|---|---|
| Model No. | Eurostar400 control | |
| JAN Code | 4053411047580 | |
| Standard price |
JPY: 792,000
USD: 4,964.58
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
63-5534-67 | Stirrer Eurostar400 digital | Eurostar400 digital | 1piece | JPY: 678,000 | USD: 4,249.98 |
|
|
 |
63-5534-68 | Stirrer Eurostar400 control | Eurostar400 control | 1piece | JPY: 792,000 | USD: 4,964.58 |
|
Product Catalog
| Catalog Name | Page |
|---|---|
| AS ONE Catalog 2025 [Instruments for Laboratory] | 198 |
| AS ONE Catalog 2023 [Instruments for Laboratory] | 210 |
| AS ONE Catalog 2021 [Instruments for Laboratory] | 167 |