63-2057-89 Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5
Check the Series LineupCheck the Series Lineup"init">
63-2057-89 Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
YAMAWA MFG. Co., Ltd.
SpecSpec class="init">
63-2057-89 Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5
Features
- The unique groove shape and cutting angle have been adopted to improve chip expulsion.
- Heel cutting performance has been improved in order to accurately cut the chips deep inside the screw and eliminate the remaining chips.
- Since there are no chips left, blade chipping trouble at the bite part, which is easy to occur when reversing, is greatly reduced.
- The screw section has a special shape that leaves a few complete threads, and the subsequent threads are removed by half, thereby enhancing the chipping prevention effect of the complete screw section.
- For blind hole machining.
- Work Material: Stainless Steel, Low, Medium, High Carbon Steel, Alloy Steel.
SpecSpec class="init">
63-2057-89 Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
YAMAWA MFG. Co., Ltd.
63-2057-89 Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5
特徴
- The unique groove shape and cutting angle have been adopted to improve chip expulsion.
- Heel cutting performance has been improved in order to accurately cut the chips deep inside the screw and eliminate the remaining chips.
- Since there are no chips left, blade chipping trouble at the bite part, which is easy to occur when reversing, is greatly reduced.
- The screw section has a special shape that leaves a few complete threads, and the subsequent threads are removed by half, thereby enhancing the chipping prevention effect of the complete screw section.
- For blind hole machining.
- Work Material: Stainless Steel, Low, Medium, High Carbon Steel, Alloy Steel.
Spec
- Precision: P5
- precision notation: P-class
- Nominal Dimensions: M20
- pitch (mm): 2.5
- screw length (mm): 33
- Total length (mm): 140
- Shank diameter (mm): 15
- Shank square (mm): 12
- lower hole diameter (mm): 17.6
- Processed screw: metric thread
- threads per inch canister: 2.5 mountains
- Surface treatment: Oxidation treatment
- number of grooves: 4
- Nominal Dimensions: M20
- material/Finishing : High speed steel (HSS)
- Country of origin: Japan
- Code Number: 114 -2832
-
Package size：110×32×32 mm 220 g
[荷姿サイズについて]
Order No.
63-2057-89
Model No.
HVSP-P5-M20X2.5
JAN Code
4582639526954
Standard price
JPY: 10,280
USD: 64.44
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
63-2057-85
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M12X1.75
HVSP-P4-M12X1.75
1piece
JPY: 3,000
USD: 18.81
63-2057-86
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M14X2
HVSP-P4-M14X2
1piece
JPY: 4,230
USD: 26.52
63-2057-87
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M16X2
HVSP-P4-M16X2
1piece
JPY: 5,475
USD: 34.32
63-2057-88
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M18X2.5
HVSP-P5-M18X2.5
1piece
JPY: 7,580
USD: 47.52
63-2057-89
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5
HVSP-P5-M20X2.5
1piece
JPY: 10,280
USD: 64.44
63-2057-90
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M22X2.5
HVSP-P5-M22X2.5
1piece
JPY: 13,050
USD: 81.80
63-2057-91
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M24X3
HVSP-P5-M24X3
1piece
JPY: 16,280
USD: 102.05
63-2057-92
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M27X3
HVSP-P5-M27X3
1piece
JPY: 22,950
USD: 143.86
63-2057-93
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M30X3
HVSP-P6-M30X3
1piece
JPY: 29,180
USD: 182.91
63-2057-94
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M33X3
HVSP-P6-M33X3
1piece
JPY: 34,050
USD: 213.44
63-2057-95
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M36X3
HVSP-P6-M36X3
1piece
JPY: 39,230
USD: 245.91
63-2057-96
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M39X3
HVSP-P6-M39X3
1piece
JPY: 45,000
USD: 282.08
63-2057-97
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M42X3
HVSP-P6-M42X3
1piece
JPY: 54,750
USD: 343.20
63-2057-98
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M48X3
HVSP-P6-M48X3
1piece
JPY: 80,250
USD: 503.04
This page is the page of Spiral Fluted Taps for large forged parts in the heavy metalworking industry sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
63-2057-89 Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
YAMAWA MFG. Co., Ltd.
63-2057-89 Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5
Features
- The unique groove shape and cutting angle have been adopted to improve chip expulsion.
- Heel cutting performance has been improved in order to accurately cut the chips deep inside the screw and eliminate the remaining chips.
- Since there are no chips left, blade chipping trouble at the bite part, which is easy to occur when reversing, is greatly reduced.
- The screw section has a special shape that leaves a few complete threads, and the subsequent threads are removed by half, thereby enhancing the chipping prevention effect of the complete screw section.
- For blind hole machining.
- Work Material: Stainless Steel, Low, Medium, High Carbon Steel, Alloy Steel.
Spec
- Precision: P5
- precision notation: P-class
- Nominal Dimensions: M20
- pitch (mm): 2.5
- screw length (mm): 33
- Total length (mm): 140
- Shank diameter (mm): 15
- Shank square (mm): 12
- lower hole diameter (mm): 17.6
- Processed screw: metric thread
- threads per inch canister: 2.5 mountains
- Surface treatment: Oxidation treatment
- number of grooves: 4
- Nominal Dimensions: M20
- material/Finishing : High speed steel (HSS)
- Country of origin: Japan
- Code Number: 114 -2832
-
Package size：110×32×32 mm 220 g
[About Package size]
Order No.
63-2057-89
Model No.
HVSP-P5-M20X2.5
JAN Code
4582639526954
Standard price
JPY: 10,280
USD: 64.44
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
63-2057-85
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M12X1.75
HVSP-P4-M12X1.75
1piece
JPY: 3,000
USD: 18.81
63-2057-86
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M14X2
HVSP-P4-M14X2
1piece
JPY: 4,230
USD: 26.52
63-2057-87
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M16X2
HVSP-P4-M16X2
1piece
JPY: 5,475
USD: 34.32
63-2057-88
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M18X2.5
HVSP-P5-M18X2.5
1piece
JPY: 7,580
USD: 47.52
63-2057-89
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5
HVSP-P5-M20X2.5
1piece
JPY: 10,280
USD: 64.44
63-2057-90
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M22X2.5
HVSP-P5-M22X2.5
1piece
JPY: 13,050
USD: 81.80
63-2057-91
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M24X3
HVSP-P5-M24X3
1piece
JPY: 16,280
USD: 102.05
63-2057-92
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M27X3
HVSP-P5-M27X3
1piece
JPY: 22,950
USD: 143.86
63-2057-93
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M30X3
HVSP-P6-M30X3
1piece
JPY: 29,180
USD: 182.91
63-2057-94
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M33X3
HVSP-P6-M33X3
1piece
JPY: 34,050
USD: 213.44
63-2057-95
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M36X3
HVSP-P6-M36X3
1piece
JPY: 39,230
USD: 245.91
63-2057-96
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M39X3
HVSP-P6-M39X3
1piece
JPY: 45,000
USD: 282.08
63-2057-97
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M42X3
HVSP-P6-M42X3
1piece
JPY: 54,750
USD: 343.20
63-2057-98
Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M48X3
HVSP-P6-M48X3
1piece
JPY: 80,250
USD: 503.04
63-2057-89 Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5
特徴
- The unique groove shape and cutting angle have been adopted to improve chip expulsion.
- Heel cutting performance has been improved in order to accurately cut the chips deep inside the screw and eliminate the remaining chips.
- Since there are no chips left, blade chipping trouble at the bite part, which is easy to occur when reversing, is greatly reduced.
- The screw section has a special shape that leaves a few complete threads, and the subsequent threads are removed by half, thereby enhancing the chipping prevention effect of the complete screw section.
- For blind hole machining.
- Work Material: Stainless Steel, Low, Medium, High Carbon Steel, Alloy Steel.
Spec
- Precision: P5
- precision notation: P-class
- Nominal Dimensions: M20
- pitch (mm): 2.5
- screw length (mm): 33
- Total length (mm): 140
- Shank diameter (mm): 15
- Shank square (mm): 12
- lower hole diameter (mm): 17.6
- Processed screw: metric thread
- threads per inch canister: 2.5 mountains
- Surface treatment: Oxidation treatment
- number of grooves: 4
- Nominal Dimensions: M20
- material/Finishing : High speed steel (HSS)
- Country of origin: Japan
- Code Number: 114 -2832
Package size：110×32×32 mm 220 g [荷姿サイズについて]
| Order No. | 63-2057-89 | |
|---|---|---|
| Model No. | HVSP-P5-M20X2.5 | |
| JAN Code | 4582639526954 | |
| Standard price |
JPY: 10,280
USD: 64.44
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
|
63-2057-85 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M12X1.75 | HVSP-P4-M12X1.75 | 1piece | JPY: 3,000 | USD: 18.81 |
|
|
|
63-2057-86 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M14X2 | HVSP-P4-M14X2 | 1piece | JPY: 4,230 | USD: 26.52 |
|
|
|
63-2057-87 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M16X2 | HVSP-P4-M16X2 | 1piece | JPY: 5,475 | USD: 34.32 |
|
|
|
63-2057-88 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M18X2.5 | HVSP-P5-M18X2.5 | 1piece | JPY: 7,580 | USD: 47.52 |
|
|
|
63-2057-89 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5 | HVSP-P5-M20X2.5 | 1piece | JPY: 10,280 | USD: 64.44 |
|
|
|
63-2057-90 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M22X2.5 | HVSP-P5-M22X2.5 | 1piece | JPY: 13,050 | USD: 81.80 |
|
|
|
63-2057-91 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M24X3 | HVSP-P5-M24X3 | 1piece | JPY: 16,280 | USD: 102.05 |
|
|
|
63-2057-92 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M27X3 | HVSP-P5-M27X3 | 1piece | JPY: 22,950 | USD: 143.86 |
|
|
|
63-2057-93 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M30X3 | HVSP-P6-M30X3 | 1piece | JPY: 29,180 | USD: 182.91 |
|
|
|
63-2057-94 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M33X3 | HVSP-P6-M33X3 | 1piece | JPY: 34,050 | USD: 213.44 |
|
|
|
63-2057-95 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M36X3 | HVSP-P6-M36X3 | 1piece | JPY: 39,230 | USD: 245.91 |
|
|
|
63-2057-96 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M39X3 | HVSP-P6-M39X3 | 1piece | JPY: 45,000 | USD: 282.08 |
|
|
|
63-2057-97 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M42X3 | HVSP-P6-M42X3 | 1piece | JPY: 54,750 | USD: 343.20 |
|
|
|
63-2057-98 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M48X3 | HVSP-P6-M48X3 | 1piece | JPY: 80,250 | USD: 503.04 |
|
This page is the page of Spiral Fluted Taps for large forged parts in the heavy metalworking industry sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
63-2057-89 Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5
Features
- The unique groove shape and cutting angle have been adopted to improve chip expulsion.
- Heel cutting performance has been improved in order to accurately cut the chips deep inside the screw and eliminate the remaining chips.
- Since there are no chips left, blade chipping trouble at the bite part, which is easy to occur when reversing, is greatly reduced.
- The screw section has a special shape that leaves a few complete threads, and the subsequent threads are removed by half, thereby enhancing the chipping prevention effect of the complete screw section.
- For blind hole machining.
- Work Material: Stainless Steel, Low, Medium, High Carbon Steel, Alloy Steel.
Spec
- Precision: P5
- precision notation: P-class
- Nominal Dimensions: M20
- pitch (mm): 2.5
- screw length (mm): 33
- Total length (mm): 140
- Shank diameter (mm): 15
- Shank square (mm): 12
- lower hole diameter (mm): 17.6
- Processed screw: metric thread
- threads per inch canister: 2.5 mountains
- Surface treatment: Oxidation treatment
- number of grooves: 4
- Nominal Dimensions: M20
- material/Finishing : High speed steel (HSS)
- Country of origin: Japan
- Code Number: 114 -2832
Package size：110×32×32 mm 220 g [About Package size]
| Order No. | 63-2057-89 | |
|---|---|---|
| Model No. | HVSP-P5-M20X2.5 | |
| JAN Code | 4582639526954 | |
| Standard price |
JPY: 10,280
USD: 64.44
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
63-2057-85 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M12X1.75 | HVSP-P4-M12X1.75 | 1piece | JPY: 3,000 | USD: 18.81 |
|
|
|
63-2057-86 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M14X2 | HVSP-P4-M14X2 | 1piece | JPY: 4,230 | USD: 26.52 |
|
|
|
63-2057-87 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P4-M16X2 | HVSP-P4-M16X2 | 1piece | JPY: 5,475 | USD: 34.32 |
|
|
|
63-2057-88 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M18X2.5 | HVSP-P5-M18X2.5 | 1piece | JPY: 7,580 | USD: 47.52 |
|
|
|
63-2057-89 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M20X2.5 | HVSP-P5-M20X2.5 | 1piece | JPY: 10,280 | USD: 64.44 |
|
|
|
63-2057-90 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M22X2.5 | HVSP-P5-M22X2.5 | 1piece | JPY: 13,050 | USD: 81.80 |
|
|
|
63-2057-91 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M24X3 | HVSP-P5-M24X3 | 1piece | JPY: 16,280 | USD: 102.05 |
|
|
|
63-2057-92 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P5-M27X3 | HVSP-P5-M27X3 | 1piece | JPY: 22,950 | USD: 143.86 |
|
|
|
63-2057-93 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M30X3 | HVSP-P6-M30X3 | 1piece | JPY: 29,180 | USD: 182.91 |
|
|
|
63-2057-94 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M33X3 | HVSP-P6-M33X3 | 1piece | JPY: 34,050 | USD: 213.44 |
|
|
|
63-2057-95 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M36X3 | HVSP-P6-M36X3 | 1piece | JPY: 39,230 | USD: 245.91 |
|
|
|
63-2057-96 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M39X3 | HVSP-P6-M39X3 | 1piece | JPY: 45,000 | USD: 282.08 |
|
|
|
63-2057-97 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M42X3 | HVSP-P6-M42X3 | 1piece | JPY: 54,750 | USD: 343.20 |
|
|
|
63-2057-98 | Spiral Fluted Taps for large forged parts in the heavy metalworking industry HVSP-P6-M48X3 | HVSP-P6-M48X3 | 1piece | JPY: 80,250 | USD: 503.04 |
|