ELECOM CO., LTD

63-1852-28　［Discontinued］PoE/11 n Wireless AP with Multimedia Outlet for Business　WAB-S300IW2-PD

Name: 63-1852-28 ［Discontinued］PoE/11 n Wireless AP with Multimedia Outlet for Business WAB-S300IW2-PD
Price: 43.75 USD

Check the Series Lineup

Features

A PoE/11n wireless AP for corporate multimedia outlets that supports the popular 2.4 GHz 11n/g/b standard and can be installed and replaced with a JIS standard multimedia outlet.
An AP (access point) that enables a wireless terminal such as a laptop or smartphone to be used in each room on a communication network connected to a hotel or ryokan.
With a housing design that can be installed in a JIS standard multimedia outlet box, it is possible to install equipment that takes into consideration the indoor landscape of hotels and inns.
It also helps prevent theft and destruction of equipment.
By installing a gigabit-capable LAN port, it is possible to carry out gigabit communication by wire.
It has a low power saving design that is about 41% lower than the previous model by devising power consumption efficiency. *Power consumption: 3.7 W, compared to the conventional WAB-S300P: 6.3 W
The housing has been miniaturized while heat generation measures have been taken, so it can be stored in a JIS standard multimedia outlet.
Realizes high quality and high reliability that can be used safely even over a long period of time.
Since it supports the PoE power receiving function and receives power supply with data communication by LAN cable, power supply work is not required.
Flexible equipment installation is possible regardless of the power supply environment.
Compatible with commercially available outlet mounting frames (sold separately).
* Erecom verified mounting frame: Panasonic WN3700P/WN3710P/WTF3710K/WTL3710 (as of 2018/8) • Can be mounted on the full-color/wide 21/advanced series of commonly used face plates.
* For the model number of the face plate corresponding to the mounting frame confirmed by Erecom, please check the website of each manufacturer.
Standard attachment of 3 types of plates that can change the body color and port according to the installation location.
It is familiar with various use scenes and does not disturb the interior.
You can configure authentication and encryption methods for each SSID to support "multiple SSIDs" that manage up to five SSIDs in a single wireless access point and to enable a variety of security policies in a single device.
Support for WAB-MAT, a dedicated management software that allows users to change settings and check the operating status of wireless access points in a single operation.
(Supported only in access point mode) Contributes to a significant reduction in management man-hours.
Power consumption can be reduced by installing a power switch and turning it off when not in use.
The LED ON/OFF button is mounted on the front of the unit, and the LED can be turned off easily.
It is designed to take into consideration the environment in which you can turn off the LED at the touch of a switch even in an environment where you are concerned about the light such as a bedroom.
The use of a built-in antenna with an elaborate position ensures that the antenna does not interfere with wall installation and does not affect communication distance.
In addition, compared with the antenna external type, communication failure due to antenna damage is also prevented.
A long-term 3-year warranty that gives you peace of mind for corporate use.
We also offer optional extension and delivery maintenance.

Spec

Wireless LAN Department
Compliant standards (standards International): IEEE 802.11 n/g/b
Compliant standards (Domestic standards): ARIB STD-T 66
Frequency range (center frequency): 2.4 GHz: 2,400 to 2,484 MHz
Channel: 2.4 GHz band: 1 to 13 ch
Modulation/demodulation method: IEEE 802.11 n/MIMO-OFDM, IEEE 802.11 g/OFDM, IEEE 802.11 b/DS-SS
Communication type: 2.4 GHz
antenna: internal antenna 2 pieces
Data rates (specification value): IEEE 802.11 n: up to 300 Mbps; IEEE 802.11 a/g: up to 54 Mbps; IEEE 802.11 b: up to 11 Mbps
Antenna power: 10 mW/MHz or less
25 or fewer connections
authentication methods: open system authentication, WPA2 (Personal)
encryption methods: WPA/WPA2: AES, TKIP
64 pieces address filtering: MAC
Other security features: SSID hiding, STA separator
Other Support Functions: Radio Output Adjustment
Wired LAN Department
Compliant standards: IEEE 802.3 10 BASE-T, IEEE 802.3 u 100 BASE-TX, IEEE 802.3 ab 1000 BASE-T, IEEE 802.3 at/IEEE 802.3 af Power over Ethernet
Ports: 10 BASE-T/100 BASE-TX/1000 BASE-T (RJ- 45 type 8-pole connector) x 2 (One rear port is a PoE powered port), auto-negotiation/Auto MDI/MDI-X capable
WAN-side configuration: DHCP/static IP address, for PPPoE (In Router Mode)
LAN-side settings: Access point mode: Obtain from DHCP/DHCP, Router mode: DHCP server/static IP
Mounting operation mode: access point mode (initial value)/router mode
Support Features
multiple SSIDs: maximum 5 pieces
tagged VLANs (IEE 802.1 Q): maximum 5 pieces
QoS: WMM capable
management function
Management Protocol: SNMP v1/v2c/v3
Other: Web UI, logging, backing up and restoring configuration files, firmware updates, NTP clients, WAB-MAT support (chisel support in access point mode)
Clients supported (when wireless is connected): Windows 7/8/8.1/10 (32 bit/64 bit), MacOS X 10.7/10.8/10.9/10.10/10.11, Android 4.0 or later, iOS 5.0 or later
Browsers supported (WebUI Configuration Time): Internet Explorer 11, Microsoft Edge, Chrome version 23.0 or later, Firefox version 17 or later, Safari version 5 or later.
standards
EMI standards - VCCI Class B
Safety standards Compliant: IEC 61000 -4
Technical standards based on the Radio Law: TELEC
Environmental standards: EU RoHS Directive compliant
LED
PWR: ON (blue)/power supply is ON.
UP LINK: lit (blue)/link up, blinking (blue)/communicating
2.4 GHz: On (blue)/WLAN enabled, Off/WLAN disabled
LAN-LINK: On (green)/Link up, Off/Not connected
LAN-ACTIVE: Blinking (orange)/During data communication, OFF/Not connected
Supported Power Supplies: PoE (IEEE 802.3 af)
Supported electric wire Cables: -
PoE Feeding Devices Supported: IEEE 802.3 at/af Feeding Devices
PoE power cables supported: LAN cable Cat5e or higher
power supply Input Voltage/Power Consumption: rating input Voltage IEEE 802.3 af 37 V -57 V/IEEE 802.3 at 42.5 V -57 V, Power Consumption: 3.7 W
environmental condition
Operating Temperature: 0 to 40 ° C
Operating Humidity: 10 to 90% (No condensation)
Storage Temperature: -10 to 60 ° C
Storage humidity: 95% or less (No condensation)
external dimensions : Width 45.5 x Depth 42.7 x Height 68.5 mm (JIS standards Multimedia Outlet Compatible)
Mass: about 93 g (main body only)
Package Contents: 1 Unit, Quick Setup Guide 1 piece, 2 Types of Port Protection Cap (LAN/TEL Each 1 piece: Body Mounted), SSID Information Seal 2 pieces, Serial Seal 2 pieces, Decorative Plate for Full Color 2 pieces Wide 1 piece
Optional: Management software "WAB-MAT" (chisel support in access point mode)
Warranty: 3 years

Package size：175×121×74 mm　240 g　 [About Package size]

Order No.	63-1852-28
Model No.	WAB-S300IW2-PD
JAN Code	4953103357198
Standard price	JPY: 6,980 USD: 43.75 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1piece

Stock in Japan	-

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image	Order No.	Name	Model No.		Quantity	Standard price	Valid price in Japan	Stock [Supplier Stock]
	63-1852-28	［Discontinued］PoE/11 n Wireless AP with Multimedia Outlet for Business　WAB-S300IW2-PD	WAB-S300IW2-PD		1piece	JPY: 6,980	USD: 43.75	-
	63-1852-29	［Discontinued］PoE/11 ac Wireless APs with Multimedia Outlets for Business　WAB-S733IW2-PD	WAB-S733IW2-PD		1piece	JPY: 9,980	USD: 62.56	-