Features

• A 2-in-1 type AC charger integrated mobile battery that can be used as both an AC charger and a mobile battery.
• You can charge the machine directly by plugging the power plug into the wall outlet.
• You can use the machine as an AC charger by connecting the smartphone to the machine you are charging. *Cable for connecting the machine to a smartphone is not included.
• The power plug section uses a swing plug mechanism that can be rotated and stored in the body.
• It is convenient to carry.
• The high-performance IC installed in the USB port automatically identifies the connected device and provides the fastest charging at the optimum output.
• It supports "charging together," which allows you to charge the machine and the smartphone together.
• Charging of the machine starts automatically after charging the smartphone.
• * Depending on the model, charging to the mobile battery may not be performed. Press and hold the power button or disconnect the charging device, and then switch to battery charging mode after a while.
• This is a high-power model with 2 ports and a maximum output of 2.4 A.
• You can charge two smartphones at the same time.
• The machine (5800 mAh battery) can charge a smartphone about twice.
• This is the recommended number of times to charge a fully charged smartphone with a battery capacity of about 1800mAh. The power may turn on while charging is in progress, or if you are using a device, it may not be possible to charge up to the specified value.
• The machine can be fully charged in about 3 hours and 10 minutes. *This is the recommended charging time for the machine only.
• The battery level can be checked by lighting the LED lamp in four levels.
• It is equipped with a rechargeable lithium-ion battery that can be used about 500 times repeatedly.
• The built-in rechargeable lithium-ion battery is designed for safety in accordance with JIS C8711 and JIS C8714.
• It is a highly safe product that conforms to the technical standards of the Electrical Appliance and Material Safety Act (PSE) of Japan.
• Anshin circuit design with overcharge, overdischarge, overvoltage, overcurrent prevention function and short circuit protection function.
• * The battery is charged at about 70% when shipped from the factory. Rechargeable lithium-ion batteries discharge over time, so it is recommended to charge them before use.