Spec

• Flow Formula
• Reaction vessel: Column type reaction vessel (stainless steel)
• Size of reaction vessel: standard attachment/inner diameter 5 x 50 mm (1 piece), optional/inner diameter 10 x 50 mm
• Upper limit of gas induction pressure: less than 1 MPa
• Temperature control range: 50 ~ 200 degrees C (aluminum block thermostat)
• Flow rate adjustment range: liquid/0.001 ~ 1.000 mL/min, hydrogen gas/2.0 ~ 100.0 mL/min
• Pressure adjustment range: 0 ~ 0.8 MPa
• Setting and display: Sheet key input and digital display
• Temperature control: Aluminum block jacket, heated P.I.D
• Liquid pump flow control: Quantitative feed by single plunger pump
• Gas flow control by mass flow controller
• Transferred liquid/gas: 1 system (substrate solution or cleaning fluid)/1 system (hydrogen gas)
• Collection line: 1 line (product or waste liquid)
• Safety functions: pressure sensor upper limit pressure alarm, mass flow gas flow rate alarm, liquid pump, self-diagnostic function (upper limit pressure), aluminum block temperature fuse, temperature controller self-diagnostic function (Variable upper limit temperature, sensor error), fuse, protect cover
• Wetted Part Material: SUS 316, FFKM, PEEK, PTFE, Sapphire, Ruby, Glass
• Hydrogen gas connection port: Outer diameter 1/16 Swagelok (R) tube fitting
• Raw material container: 100 mL glass bottle, 5 mL injector
• Operating ambient temperature and humidity range: 15 ~ 35 degrees C, 30 ~ 80% RH
• External dimensions: 300 x 420 x 377 mm
• Power input/voltage: 5 A, 500 VA/AC 100 V 50/60 Hz
• *Performance is measured at room temperature of 25 degrees Celsius, rated supply voltage, 50 Hz and no load.
• *Depending on the operating conditions, the internal pressure in the channel may increase and not be controlled by the set value.
• *Catalysts and hydrogen gas sources are not included. Please prepare it separately.
• Code: 262770
•