Spec

• Speed range: 140 ~ 1200 rpm (continuously variable)
• Evaporative capacity: 1140 mL/h (water) when hot water circulates at 70 degrees C and vacuum is 4.0 kPa (30 torr)
• Reached vacuum: vacuum pump capacity + 13.3 hPa (1 Torr)
• Viscosity used: about 1000 cP
• Temperature setting range: room temperature + 5 ~ 90 degrees C
• Rotation setting and display: Volume setting and digital display
• Timer function: Control the sample injection volume by setting the ON/OFF time of the solenoid valve.
• Liquid level management function: Liquid level sensor
• Motor: DC Brushless motor output 60 W
• Rotating shaft seal: Vacuum seal
• Evaporation tube: Jacket-type evaporation area: 0.04 m2
• Cooler: Vertical double serpentine cooling area: 0.3 m2
• Receiving flask: 1L concentrate side, 1L evaporator side, with drain cock
• Heating source: External hot water circulator (sold separately)
• Wetted part material: Hard glass, Teflon (R), SUS 304
• Connection diameter: outside diameter of nozzle for cooling/hot water circulation: 12 mm, outside diameter of suction/sample nozzle: 8 mm
• Sample injection method: Automatic control method with liquid level sensor
• Operating ambient temperature range: 5 ~ 35 degrees C
• External dimensions: 625 x 400 x 1416 mm
• Weight: 40 kg
• Power input/power voltage: 2 A, 200 VA/AC 100 V 50/60 Hz A separate power supply is required for the heating source.
• *Vacuum pumps, cooling water circulators, etc. are required for use.
• *Evaporation capacity varies depending on conditions such as decompression conditions, hot water circulation tank, and cooling water temperature.
• *The degree of vacuum during operation depends on the cooling water temperature, the decompression device and the sample.
• Code: 117450
• *Shipping, carrying-in, installation and assembly costs are required separately. Please inquire.
•