Spec

• Air-Cooled/Sealed Directional Circulation
• Compatible Circulating Water: Water, Pure Water (Electrical conductivity of ion exchange water, distilled water, RO water, etc.: 0.01 mS/m or more), Silicone Oil, Burrell Silicone Fluid (R), Ethylene Glycol, Naive Line (R)
• Temperature setting range: 10 ~ 30 degrees Celsius (without heater)
• Temperature control accuracy: +/- 2 degrees C
• Cooling capacity (at liquid temperature): 20 degrees C/1090 W (937 kcal/h), 10 degrees C/915 W (786 kcal/h)
• External circulation capacity (50/60 Hz): Maximum flow rate 17.5/18.5 L/min, Maximum head: 20.5/25 m
• Temperature control: Refrigerator ON-OFF control
• Temperature setting/display: Sheet key input/digital display, minimum digit 1 degree C
• External input/output: Alarm output (no voltage a contact)
• Safety functions: Leakage/overcurrent breaker, refrigerator high-pressure switch, overload relay holding circuit, refrigerator protection timer, temperature controller self-diagnostic function, circulating pump thermal protector
• Attached functions: With flow stop valve, temperature display correction function, emergency stop button
• Refrigerator/Refrigerant: Air-cooled 650 W/R 407 C
• Cooling Coil: SUS 304
• External circulation nozzle (both discharge and return ports): 14 mm outer diameter hose port (Rc 3/8)
• Water Tank Materials, Dimensions, Capacity: SUS 304, Inner Diameter 280 x 270 mm, 16.5 L (Liquid Amount 12.5 L)
• Operating ambient temperature range: 5 ~ 35 degrees C
• External dimensions: 340 x 370 (410) x 988 mm/* Dimensions in () include projections.
• Weight: approximately 58 kg
• Power input: 13 A, 1.3 kVA
• Power supply voltage: 100 VAC 50/60 Hz
• *Performance is measured at room temperature of 20 degrees Celsius, rated power supply voltage and no load.
• *Cooling capacity is +/- 10% of display capacity.
• *The external circulation capacity is +/- 10% of the display capacity.
• *The silicone oil should have a viscosity of 10 mPa/S or less at a liquid temperature of 10 degrees Celsius. If a silicone oil of more than 10 mPa/S is selected (for high or medium temperatures, etc.), the viscosity may be too high to circulate.
• Code: 264020
• *Shipping, carrying-in, installation and assembly costs are required separately. Please inquire.
•