63-1394-15 ［Discontinued］Photostability testing machine LST-2010
Features
- Control illuminance, temperature, humidity, and near-ultraviolet rays for light resistance and environmental testing of foods, chemicals, and raw materials. Illuminance can be adjusted up to 17000Lx, temperature can be adjusted up to 60°C, and humidity can be adjusted up to 75%RH, providing high accuracy and reproducibility for light resistance and environmental testing of foods, chemicals, and raw materials. Illuminance is continuously dimmed by the light sensor, so there is little loss of illumination due to deterioration of the light source lamp and it is stable.
- Since the air volume can be adjusted, powdery samples can also be used.
- The accumulated operating time of fluorescent lamps, humidifiers, filters, etc. is displayed, so you can easily check the cleaning and replacement time.
Spec
- Downdraft type
- Temperature control range: 5 ~ 60 degrees C (10 ~ 60 degrees C 3000 Lx or higher) (mode 1), 5 ~ 50 degrees C (10 ~ 50 degrees C 3000 Lx or higher) (mode 2)
- Temperature control accuracy: +/- 0.5 degrees C (mode 1) when off, +/- 1.7 degrees C (mode 2)
- Humidity adjustment range and accuracy: 50 ~ 80% RH, +/- 5.0% RH (mode 1), +/- 10% RH (mode 2)
- Illumination Distribution Accuracy: 500 ~ 17000 Lx Stepless Dimming (10 Lx Units), +/- 100 Lx
- Temperature/humidity distribution: Spatial temperature/humidity deviation 3.0 degrees C/9% RH, temperature/humidity gradient 5.0 degrees C/13% RH (Mode 1: Setting 20 degrees C/40 degrees C)
- Accuracy of illuminance distribution: within +/- 6%
- Near-ultraviolet intensity measurement range: 0 ~ 1.20 mW/cm 2 (integrated illumination and near-ultraviolet intensity values can be set simultaneously)
- Temperature and humidity control: Mode 1 /: Heater P.I.D control SSR output, Mode 2: Refrigerator ON-OFF control (temperature)/P.I.D control (humidity)
- Defrosting function: 1. Automatic control system (in operation) 2. Forced manual system (Manual Start, Automatic Stop)
- Safety functions: Alarm function (Sensor malfunction, heater disconnection, upper/lower temperature warning, power failure, SSR, overrise/overcooling prevention/temperature gradient, poor cooling), independent overrise/independent overrise/overcooling prevention function, leakage/overcurrent breaker, refrigerator overload relay holding circuit, refrigerator high-pressure switch
- Included features: Temperature correction, maintenance mode, RS -232 C connection, recorder output, alarm output, USB plug (CF only)
- Heater: 900 W
- Refrigerator/Refrigerant: Air-cooled output: 400 W/R 404 A
- Lighting: White fluorescent 40 W x 12 + Near-ultraviolet 40 W x 3
- Humidifier; Ultrasonic humidification (oscillator life: about 10,000 hours)
- Interior: SUS 304 Glass
- Interior dimensions (width x depth x height): 520 x 520 x 1085 mm
- Internal volume (L): about 290
- Shelf Board Load Capacity, Material, Number of Levels: Uniform Max. 25 kg/Sheet, PE Coating, 17 Levels
- Number of Shelf Boards Attached/Shelf Pitch: 3/50 mm
- Service outlet/Cable hole: 2 (Total Max. 1A), 1 right inside diameter 40 mm
- Water supply for humidification: Distilled or ion-exchanged water (poly tank or cartridge purifier) Electrical conductivity: 10 microS/cm or less
- Recorder output: Measured temperature 1 degrees C/0.02 V Measured humidity 1% RH/0.02 V Measured illuminance 1000 Lx/0.1 V Measured near ultraviolet light 0.1 mW/cm2/02 V Accuracy +/- 2% FS
- Operating ambient temperature range: 5 ~ 35 degrees C
- External dimensions: 720 x 888 (928) x 1810 mm
- Weight (kg): approximately 243
- Power input/voltage: 26 A, 2.6 kVA/100 VAC 50/60 Hz
- *Power plug not included.
- Code: 261570
Package size：830×1100×1980 mm 290 kg [About Package size]
Order No.Order No.ss="init">
63-1394-15 ［Discontinued］Photostability testing machine LST-2010特徴
仕様
荷姿サイズ：830×1100×1980 mm 290 kg [荷姿サイズについて]
| ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
