Spec

• Clamp force (N): 10,000
• Turning direction/angle: left/right 360 degrees
• Clamp stroke (mm): 40
• Height (mm): Max 171.0
• Mounting screws (mm): M 12
• d=40 mm/h1 max.=135 mm
• The clamp position can be adjusted continuously by the positioning ring EH 23310.0350 and the clamp arm can be brought to the same position repeatedly.
• Dimension h2 is increased by 7 mm when using a positioning ring (stroke s is minus 7 mm).
• There are 2 ways to secure it: Use a T-groove and a T-nut (DIN 508).
• Use bolts to fix directly to the substrate of the jig, etc.
• Install the clamp so that the entire bottom is in contact with the flat surface.
• The clamp height is limited to no more than h1.
• Reference height adjustment cylinder EH? 23310. or spacer plate EH? 1107., and EH 1108. can be used for clamping at high positions.
• Also, when clamping at a lower position, the rocking pad EH? 22730. etc. can be installed to deal with it.
• Maximum holding force: 10 kN
• Materials/Finishes: hardened steel, carburized hardening, black-dyed, polished
• Country of origin: Germany
• Securities Code: 105 -5545
•