Spec

• Maximum tightening torque: 150 N*m
• [Impact Mode]
• Screwed ability (mm): Screws: M4 to M8, Regular bolt: M5 to M14, High Power bolt: M5 to M12, Course Thread: 22 to 125
• rotation speed (min -1): Strong: 0 to 2700, Medium: 0 to 2200, Weak: 0 to 1300
• Number of strikes (min -1): Strong: 0 to 3200, Medium: 0 to 2400, Weak: 0 to 1200
• Amount of work per 1 charge (standard) * 1: wooden screw φ 4.3 × 65 mm (Lauan): about 320
• [vibration mode]
• drilling capacity (mm): Concrete: φ8
• rotation speed (min -1): Fast: 0 to 2700 Slow: 0 to 700
• Number of strikes (min -1): fast: 0 to 32400 slow: 0 to 8400
• Effort per 1 charge (standard)/Screws * 1: carbide drill φ5 mm mortar (Depth 30 mm): approx. 230 pcs
• [Drill Mode]
• drilling capacity (mm): High speed: Iron Works: φ 6.5, Woodwork: 12, Low speed: Iron Works: φ 10, Woodwork: 21
• rotation speed (min -1): Fast: 0 to 2700 Slow: 0 to 700
• 1 Amount of work per charge (standard) * 1: High speed: Iron Works gimlet φ3 mm 1.6 mm Thick steel plate: approx. 850 pcs. Low speed: Wood Works gimlet φ 21 mm, 30 mm Thick Lauan: approx. 350 pcs.
• [screw tightening mode]
• Screwed ability (mm): Phillips head screws: High speed: M3.5 to M6, Low speed: M4 to M6, Normal bolt, High power bolt course thread: High speed: [In plus (P) mode] M4 textured screws (maximum plate thickness 3.2 mm), Low speed: [In plus (P) mode] "Plus (P) mode, high speed" unable to tighten M4, M5 textured screws
• rotation speed (min -1) fast : 0 to 1100 (Varies by the set value) , 0 to 2300 (In plus (P) mode) slow : 0 to 300 (Varies by the set value) , 0 to 600 (In plus (P) mode)
• Effort per 1 charge (standard) * 1: Screws for texturing 4 mm C channel, 2.3 mm Thickness + 0.8 mm Thick steel plate: Approximately 370 pieces
• Mass (kg) (Battery included): 1.7
• Standard Accessories: + bit 2 -65 hook
• Comprises: Battery BL 1830 x 2 pieces, charger DC 18 RC and case. * 1. Figures are for reference only. It depends on the state of charge and working conditions of the battery.
•