62-6182-79 ［Discontinued］Mini Uni (Slit Septum 0.45 μm dpPP) 1 Pack (100 Pieces) US203NPUDPP
Features
- Filtration is completed in one piece and pretreatment time is reduced to 1/3 of conventional time.
- Reduces cost and waste by reducing consumables such as syringes
- Suitable for many autosamplers
- A filter-integrated filtration vial that does not require assembly and consists of a 0.4 mL chamber and plunger. The plunger has a filtration membrane on the chamber side and a septum cap on the opposite side. When the sample is placed in the chamber and the plunger is pushed in, the pressure filters the sample and the filtrate accumulates in the reservoir of the plunger. Air is evacuated through the vent hole and the evaporation seal (locking ring) is sealed when the plunger is fully pushed in. Mini-Uni is designed to be compatible with 12 mmx32mm vial autosamplers, so pre-treated Mini-Uni can be loaded into the autosampler and HPLC analysis can begin.
- It is also possible to stick the needle manually and suck up the sample.
- You can push the plunger by hand, but we also have a special compressor.
- Slitted septum cap for high throughput automation
- For delicate needles. Suppresses evaporation of samples
- Note)Only for test and research purposes.
Spec
- Size: equivalent to 12 mm x 32 mm vial
- Housing and Cap: Polypropylene
- Septum: PTFE Coated Silicon Rubber
- Filtrable Volume: 0.4 mL
- Required Pressure: Approx. 8.2 kg (18lbs)
- Maximum Operating Temperature: 50°C
- Type of sample: aqueous solution/organic solvent - fast filtration rate and high load capacity
Package sizePackage sizes="init">
62-6182-79 ［Discontinued］Mini Uni (Slit Septum 0.45 μm dpPP) 1 Pack (100 Pieces) US203NPUDPP
特徴
- Filtration is completed in one piece and pretreatment time is reduced to 1/3 of conventional time.
- Reduces cost and waste by reducing consumables such as syringes
- Suitable for many autosamplers
- A filter-integrated filtration vial that does not require assembly and consists of a 0.4 mL chamber and plunger. The plunger has a filtration membrane on the chamber side and a septum cap on the opposite side. When the sample is placed in the chamber and the plunger is pushed in, the pressure filters the sample and the filtrate accumulates in the reservoir of the plunger. Air is evacuated through the vent hole and the evaporation seal (locking ring) is sealed when the plunger is fully pushed in. Mini-Uni is designed to be compatible with 12 mmx32mm vial autosamplers, so pre-treated Mini-Uni can be loaded into the autosampler and HPLC analysis can begin.
- It is also possible to stick the needle manually and suck up the sample.
- You can push the plunger by hand, but we also have a special compressor.
- Slitted septum cap for high throughput automation
- For delicate needles. Suppresses evaporation of samples
- Note)Only for test and research purposes.
仕様
- Size: equivalent to 12 mm x 32 mm vial
- Housing and Cap: Polypropylene
- Septum: PTFE Coated Silicon Rubber
- Filtrable Volume: 0.4 mL
- Required Pressure: Approx. 8.2 kg (18lbs)
- Maximum Operating Temperature: 50°C
- Type of sample: aqueous solution/organic solvent - fast filtration rate and high load capacity
荷姿サイズ：165×80×133 mm 270 g [About Package size]
| Order No. | 62-6182-79 | |||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model No. | US203NPUDPP | |||||||||||||||||||||||||||||||||||||
Standard priceStandard pricess="init">
62-6182-79 ［Discontinued］Mini Uni (Slit Septum 0.45 μm dpPP) 1 Pack (100 Pieces) US203NPUDPP特徴
仕様
荷姿サイズ：165×80×133 mm 270 g [荷姿サイズについて]
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| ||||||||||||||||||||||||||||||||||||||
![<!--@[ia-1]@-->取扱停止<!--@/[ia-1]@-->](/en/asone/img/usestop_en_US.png?v=897ccfaa5270bed4dad0662a8ca3207d7ee0ddc44){kind=small}