62-6180-57 ［Discontinued］13 mm GD/X Syringe Filter (GF/C 1.2 μm) 1 Pack (150 Pieces) 6886-1312
特徴
- Does not clog easily compared to general syringe filters and can filter 3~7 times the amount
- Three-layer prefilter efficiently removes unwanted particles
- Whatman GMF150 (double layer structure) and GF/F prefilter prevent clogging
- Syringe filter developed for filtration of solutions containing a large amount of suspended particles.
- As a prefilter, GMF150 (double layer structure) and GF/F of glass fiber filter paper are built in. With this pre-filter, GD/X can filter samples that are difficult to filter with conventional filters by applying light force with your hands without worrying about contamination.
- Note)Only for test and research purposes.
- Built-in glass fiber filter paper of each grade instead of membrane. The pre-filter is only GMF150, and there is no GF/F. The pore size is indicated by the particle retention capacity.
- GF= Fiberglass
Spec
- Housing Material: Polypropylene (Uncolored)
- Filtration area: 1.3 cm2
- Voltage: 100psi (6.9 bar)
- Residual liquid volume: 0.5 mL before air purge, about 50 μl after air purge
- Dimensions: 21.6 mmx29.8mm
- Weight: about 3g
- Flow direction: Sample must be injected from the inlet side.
- Inlet: Female Luer Lock
- outlets: male lures
- Sterilization: Autoclavable. 20 minutes at 121°C, 15psi
- Glass Fiber: 100% Borosilicate
- Prefilter: GMF150 (10μm: 1 μm), GF/F (0.7 μm)
- Note)Pre-filter borosilicate glass fibers are physically and chemically stable, but alkaline components may leach into aqueous solutions. Biological samples that are sensitive to pH can be affected by the elution of trace alkali components.
Package sizePackage sizes="init">
62-6180-57 ［Discontinued］13 mm GD/X Syringe Filter (GF/C 1.2 μm) 1 Pack (150 Pieces) 6886-1312
特徴
- Does not clog easily compared to general syringe filters and can filter 3~7 times the amount
- Three-layer prefilter efficiently removes unwanted particles
- Whatman GMF150 (double layer structure) and GF/F prefilter prevent clogging
- Syringe filter developed for filtration of solutions containing a large amount of suspended particles.
- As a prefilter, GMF150 (double layer structure) and GF/F of glass fiber filter paper are built in. With this pre-filter, GD/X can filter samples that are difficult to filter with conventional filters by applying light force with your hands without worrying about contamination.
- Note)Only for test and research purposes.
- Built-in glass fiber filter paper of each grade instead of membrane. The pre-filter is only GMF150, and there is no GF/F. The pore size is indicated by the particle retention capacity.
- GF= Fiberglass
仕様
- Housing Material: Polypropylene (Uncolored)
- Filtration area: 1.3 cm2
- Voltage: 100psi (6.9 bar)
- Residual liquid volume: 0.5 mL before air purge, about 50 μl after air purge
- Dimensions: 21.6 mmx29.8mm
- Weight: about 3g
- Flow direction: Sample must be injected from the inlet side.
- Inlet: Female Luer Lock
- outlets: male lures
- Sterilization: Autoclavable. 20 minutes at 121°C, 15psi
- Glass Fiber: 100% Borosilicate
- Prefilter: GMF150 (10μm: 1 μm), GF/F (0.7 μm)
- Note)Pre-filter borosilicate glass fibers are physically and chemically stable, but alkaline components may leach into aqueous solutions. Biological samples that are sensitive to pH can be affected by the elution of trace alkali components.
荷姿サイズ：80×290×80 mm 530 g [About Package size]
| アズワン品番 | 62-6180-57 | |
|---|---|---|
| 型番 | 6886-1312 | |
| 標準価格 |
JPY: 59,200
USD: 371.09
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1pack(150pieces) | |
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | 商品名 | 型番 | Quantity | Standard price | Valid price in Japan | Stock [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
 |
62-6180-19 | 13 mm GD/X syringe filter (NYL 0.2 mum) 6870-1302 | 6870-1302 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-20 | 13 mm GD/X syringe filter (NYL 0.45 mum) 6870-1304 | 6870-1304 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-28 | 13 mm GD/X Syringe Filter (PVDF 0.45 μm) 1 Pack (1500 Pieces) 6873-1304 | 6873-1304 | 1pack(1500pieces) | JPY: 529,100 | USD: 3,316.62 |
|
|
 |
62-6180-31 | 13 mm GD/X syringe filter (PTFE 0.2 mum) 6874-1302 | 6874-1302 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
 |
62-6180-32 | 13 mm GD/X syringe filter (PTFE 0.45 mum) 6874-1304 | 6874-1304 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-37 | 13 mm GD/X syringe filter (PES 0.2 mum) 6876-1302 | 6876-1302 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-55 | 13 mm GD/X syringe filter (GF/B 1.0 mum) 6884-1310 | 6884-1310 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
 |
62-6180-60 | 13 mm GD/X Syringe Filter (GF/D 2.7 μm) 1 Pack (150 Pieces) 6888-1327 | 6888-1327 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-62 | 13 mm GD/X Syringe Filter (GF/F 0.7 μm) 1 Pack (150 Pieces) 6890-1307 | 6890-1307 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-66 | 13 mm GD/X syringe filter (GMF 0.45 mum) 6894-1304 | 6894-1304 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-38 | ［Discontinued］13 mm GD/X Syringe Filter (PES 0.45 μm) 1 Pack (150 Pieces) 6876-1304 | 6876-1304 | 1pack(150pieces) | JPY: 59,200 | USD: 371.09 |
-
|
|
|
62-6180-41 | ［Discontinued］13 mm GD/X Syringe Filter (PP 0.2 μm) 1 Pack (150 Pieces) 6878-1302 | 6878-1302 | 1pack(150pieces) | JPY: 58,000 | USD: 363.57 |
-
|
|
|
62-6180-42 | ［Discontinued］13 mm GD/X Syringe Filter (PP 0.45 μm) 1 Pack (150 Pieces) 6878-1304 | 6878-1304 | 1pack(150pieces) | JPY: 67,900 | USD: 425.63 |
-
|
|
|
62-6180-57 | ［Discontinued］13 mm GD/X Syringe Filter (GF/C 1.2 μm) 1 Pack (150 Pieces) 6886-1312 | 6886-1312 | 1pack(150pieces) | JPY: 59,200 | USD: 371.09 |
-
|
This page is the page of ［Discontinued］13 mm GD/X Syringe Filter (GF/C 1.2 μm) 1 Pack (150 Pieces) sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
62-6180-57 ［Discontinued］13 mm GD/X Syringe Filter (GF/C 1.2 μm) 1 Pack (150 Pieces) 6886-1312
Features
- Does not clog easily compared to general syringe filters and can filter 3~7 times the amount
- Three-layer prefilter efficiently removes unwanted particles
- Whatman GMF150 (double layer structure) and GF/F prefilter prevent clogging
- Syringe filter developed for filtration of solutions containing a large amount of suspended particles.
- As a prefilter, GMF150 (double layer structure) and GF/F of glass fiber filter paper are built in. With this pre-filter, GD/X can filter samples that are difficult to filter with conventional filters by applying light force with your hands without worrying about contamination.
- Note)Only for test and research purposes.
- Built-in glass fiber filter paper of each grade instead of membrane. The pre-filter is only GMF150, and there is no GF/F. The pore size is indicated by the particle retention capacity.
- GF= Fiberglass
Spec
- Housing Material: Polypropylene (Uncolored)
- Filtration area: 1.3 cm2
- Voltage: 100psi (6.9 bar)
- Residual liquid volume: 0.5 mL before air purge, about 50 μl after air purge
- Dimensions: 21.6 mmx29.8mm
- Weight: about 3g
- Flow direction: Sample must be injected from the inlet side.
- Inlet: Female Luer Lock
- outlets: male lures
- Sterilization: Autoclavable. 20 minutes at 121°C, 15psi
- Glass Fiber: 100% Borosilicate
- Prefilter: GMF150 (10μm: 1 μm), GF/F (0.7 μm)
- Note)Pre-filter borosilicate glass fibers are physically and chemically stable, but alkaline components may leach into aqueous solutions. Biological samples that are sensitive to pH can be affected by the elution of trace alkali components.
Package size：80×290×80 mm 530 g [About Package size]
| Order No. | 62-6180-57 | |
|---|---|---|
| Model No. | 6886-1312 | |
| Standard price |
JPY: 59,200
USD: 371.09
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1pack(150pieces) | |
|
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
62-6180-19 | 13 mm GD/X syringe filter (NYL 0.2 mum) 6870-1302 | 6870-1302 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-20 | 13 mm GD/X syringe filter (NYL 0.45 mum) 6870-1304 | 6870-1304 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-28 | 13 mm GD/X Syringe Filter (PVDF 0.45 μm) 1 Pack (1500 Pieces) 6873-1304 | 6873-1304 | 1pack(1500pieces) | JPY: 529,100 | USD: 3,316.62 |
|
|
|
62-6180-31 | 13 mm GD/X syringe filter (PTFE 0.2 mum) 6874-1302 | 6874-1302 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-32 | 13 mm GD/X syringe filter (PTFE 0.45 mum) 6874-1304 | 6874-1304 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-37 | 13 mm GD/X syringe filter (PES 0.2 mum) 6876-1302 | 6876-1302 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-55 | 13 mm GD/X syringe filter (GF/B 1.0 mum) 6884-1310 | 6884-1310 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-60 | 13 mm GD/X Syringe Filter (GF/D 2.7 μm) 1 Pack (150 Pieces) 6888-1327 | 6888-1327 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-62 | 13 mm GD/X Syringe Filter (GF/F 0.7 μm) 1 Pack (150 Pieces) 6890-1307 | 6890-1307 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-66 | 13 mm GD/X syringe filter (GMF 0.45 mum) 6894-1304 | 6894-1304 | 1pack(150pieces) | JPY: 62,700 | USD: 393.03 |
|
|
|
62-6180-38 | ［Discontinued］13 mm GD/X Syringe Filter (PES 0.45 μm) 1 Pack (150 Pieces) 6876-1304 | 6876-1304 | 1pack(150pieces) | JPY: 59,200 | USD: 371.09 |
-
|
|
|
62-6180-41 | ［Discontinued］13 mm GD/X Syringe Filter (PP 0.2 μm) 1 Pack (150 Pieces) 6878-1302 | 6878-1302 | 1pack(150pieces) | JPY: 58,000 | USD: 363.57 |
-
|
|
|
62-6180-42 | ［Discontinued］13 mm GD/X Syringe Filter (PP 0.45 μm) 1 Pack (150 Pieces) 6878-1304 | 6878-1304 | 1pack(150pieces) | JPY: 67,900 | USD: 425.63 |
-
|
|
|
62-6180-57 | ［Discontinued］13 mm GD/X Syringe Filter (GF/C 1.2 μm) 1 Pack (150 Pieces) 6886-1312 | 6886-1312 | 1pack(150pieces) | JPY: 59,200 | USD: 371.09 |
-
|