Cytiva (Whatman)

62-6178-50　Polycap TF36 (0.2 μm) (Inlet/Outlet: 1/2 "SB)　6710-3602

Features

Solvent resistance with PTFE filters
Recommended for organic solvents and erosive solutions
Capsule type filters with the smallest pore size (5 types of 0.05, 0.1, 0.2, 0.45, 1.0 μm)
Sterilization with autoclave or ethylene oxide gas is possible. Integrity testing is possible.
Note)Only for test and research purposes.

Housing: Polypropylene
Membrane Material: Polytetrafluoroethylene
vents: inlet side
Support System: Polypropylene
Connection Method: Heat Crimping
Voltage: 0.41 MPa (60psi)
Filtration direction: with bidirectional support. Only one direction depending on the application due to venting. Reverse filtration is possible only at low pressure.
Sterilization: Unsterilized/Autoclavable at 121°C for 20 minutes (maximum temperature 132°C). It is possible to autoclave repeatedly, but use at the user's responsibility to avoid cross contamination. Perform the integrity test after autoclaving. Sterilization with ethylene oxide gas is possible.
Effective Filtration Area: 500 cm2
IPA Bubble Point: > 0.09 MPa (13psi)
Pore Diameter (μm): 0.2
Connection Inlet: 1/2 "SB
Connection Outlet: 1/2 "SB
1/2 "SB = Stepped Hose Port: Can be Connected to 10~12 mm (3/8" -1/2 ") Tubes

Package size：70×70×123 mm　110 g　 [About Package size]

Order No.	62-6178-50
Model No.	6710-3602
Standard price	JPY: 14,740 USD: 91.71 Excange rate 1USD= 160.72JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock

Product image	Order No.	Name	Model No.		Quantity	Standard price	Valid price in Japan	Stock [Supplier Stock]
	62-6178-23	Polycap TF36 (0.2 μm) (Inlet/Outlet: SB)　6700-3602	6700-3602		1piece	JPY: 13,640	USD: 84.87
	62-6178-50	Polycap TF36 (0.2 μm) (Inlet/Outlet: 1/2 "SB)　6710-3602	6710-3602		1piece	JPY: 14,740	USD: 91.71