62-0431-40 V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.8
仕様
- Surface treatment: V-coating
- Helix angle: about 25 degrees
- Securities Code: 824 -2681
荷姿サイズ：13×75×13 mm 20 g [荷姿サイズについて]
| アズワン品番 | 62-0431-40 | |
|---|---|---|
| 型番 | VP-ZDS-6.8 | |
| 標準価格 |
JPY: 9,320
USD: 58.42
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
 |
62-0430-64 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10 | VP-ZDS-10 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0430-65 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10.1 | VP-ZDS-10.1 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-66 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10.2 | VP-ZDS-10.2 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-67 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10.3 | VP-ZDS-10.3 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-68 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10.4 | VP-ZDS-10.4 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-69 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10.5 | VP-ZDS-10.5 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-70 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10.6 | VP-ZDS-10.6 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-71 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10.7 | VP-ZDS-10.7 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-72 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10.8 | VP-ZDS-10.8 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-73 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-10.9 | VP-ZDS-10.9 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-74 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11 | VP-ZDS-11 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-75 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11.1 | VP-ZDS-11.1 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-76 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11.2 | VP-ZDS-11.2 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-77 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11.3 | VP-ZDS-11.3 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-78 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11.4 | VP-ZDS-11.4 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-79 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11.5 | VP-ZDS-11.5 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-80 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11.6 | VP-ZDS-11.6 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-81 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11.7 | VP-ZDS-11.7 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-82 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11.8 | VP-ZDS-11.8 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-83 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-11.9 | VP-ZDS-11.9 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-84 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-12 | VP-ZDS-12 | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
62-0430-85 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-12.5 | VP-ZDS-12.5 | 1piece | JPY: 16,700 | USD: 104.68 |
|
|
 |
62-0430-86 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-13 | VP-ZDS-13 | 1piece | JPY: 16,700 | USD: 104.68 |
|
|
 |
62-0430-87 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-13.5 | VP-ZDS-13.5 | 1piece | JPY: 16,700 | USD: 104.68 |
|
|
 |
62-0430-88 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-14 | VP-ZDS-14 | 1piece | JPY: 16,700 | USD: 104.68 |
|
|
 |
62-0430-89 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-14.5 | VP-ZDS-14.5 | 1piece | JPY: 18,400 | USD: 115.34 |
|
|
 |
62-0430-90 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-15 | VP-ZDS-15 | 1piece | JPY: 18,400 | USD: 115.34 |
|
|
 |
62-0430-91 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-15.5 | VP-ZDS-15.5 | 1piece | JPY: 19,800 | USD: 124.12 |
|
|
 |
62-0430-92 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-16 | VP-ZDS-16 | 1piece | JPY: 20,800 | USD: 130.38 |
|
|
 |
62-0430-93 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-16.5 | VP-ZDS-16.5 | 1piece | JPY: 24,600 | USD: 154.20 |
|
|
 |
62-0430-94 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-17 | VP-ZDS-17 | 1piece | JPY: 24,600 | USD: 154.20 |
|
|
 |
62-0430-95 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-17.5 | VP-ZDS-17.5 | 1piece | JPY: 24,600 | USD: 154.20 |
|
|
 |
62-0430-96 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-18 | VP-ZDS-18 | 1piece | JPY: 24,600 | USD: 154.20 |
|
|
 |
62-0430-97 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-18.5 | VP-ZDS-18.5 | 1piece | JPY: 28,100 | USD: 176.14 |
|
|
 |
62-0430-98 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-19 | VP-ZDS-19 | 1piece | JPY: 28,100 | USD: 176.14 |
|
|
 |
62-0430-99 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-19.5 | VP-ZDS-19.5 | 1piece | JPY: 28,600 | USD: 179.28 |
|
|
 |
62-0431-01 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-20 | VP-ZDS-20 | 1piece | JPY: 28,600 | USD: 179.28 |
|
|
 |
62-0431-02 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3 | VP-ZDS-3 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-03 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3.1 | VP-ZDS-3.1 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-04 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3.2 | VP-ZDS-3.2 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-05 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3.3 | VP-ZDS-3.3 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-06 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3.4 | VP-ZDS-3.4 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-07 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3.5 | VP-ZDS-3.5 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-08 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3.6 | VP-ZDS-3.6 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-09 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3.7 | VP-ZDS-3.7 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-10 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3.8 | VP-ZDS-3.8 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-11 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-3.9 | VP-ZDS-3.9 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-12 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4 | VP-ZDS-4 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-13 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4.1 | VP-ZDS-4.1 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-14 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4.2 | VP-ZDS-4.2 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-15 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4.3 | VP-ZDS-4.3 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-16 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4.4 | VP-ZDS-4.4 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-17 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4.5 | VP-ZDS-4.5 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-18 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4.6 | VP-ZDS-4.6 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-19 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4.7 | VP-ZDS-4.7 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
62-0431-20 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4.8 | VP-ZDS-4.8 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-21 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-4.9 | VP-ZDS-4.9 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-22 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5 | VP-ZDS-5 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-23 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5.1 | VP-ZDS-5.1 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-24 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5.2 | VP-ZDS-5.2 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-25 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5.3 | VP-ZDS-5.3 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-26 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5.4 | VP-ZDS-5.4 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-27 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5.5 | VP-ZDS-5.5 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-28 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5.6 | VP-ZDS-5.6 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-29 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5.7 | VP-ZDS-5.7 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-30 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5.8 | VP-ZDS-5.8 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-31 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-5.9 | VP-ZDS-5.9 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-32 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6 | VP-ZDS-6 | 1piece | JPY: 8,690 | USD: 54.47 |
|
|
 |
62-0431-33 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.1 | VP-ZDS-6.1 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-34 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.2 | VP-ZDS-6.2 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-35 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.3 | VP-ZDS-6.3 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-36 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.4 | VP-ZDS-6.4 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-37 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.5 | VP-ZDS-6.5 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-38 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.6 | VP-ZDS-6.6 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-39 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.7 | VP-ZDS-6.7 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-40 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.8 | VP-ZDS-6.8 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-41 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-6.9 | VP-ZDS-6.9 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-42 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7 | VP-ZDS-7 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-43 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7.1 | VP-ZDS-7.1 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-44 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7.2 | VP-ZDS-7.2 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-45 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7.3 | VP-ZDS-7.3 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-46 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7.4 | VP-ZDS-7.4 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-47 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7.5 | VP-ZDS-7.5 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-48 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7.6 | VP-ZDS-7.6 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-49 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7.7 | VP-ZDS-7.7 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-50 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7.8 | VP-ZDS-7.8 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-51 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-7.9 | VP-ZDS-7.9 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-52 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8 | VP-ZDS-8 | 1piece | JPY: 9,320 | USD: 58.42 |
|
|
 |
62-0431-53 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8.1 | VP-ZDS-8.1 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-54 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8.2 | VP-ZDS-8.2 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-55 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8.3 | VP-ZDS-8.3 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-56 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8.4 | VP-ZDS-8.4 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-57 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8.5 | VP-ZDS-8.5 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-58 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8.6 | VP-ZDS-8.6 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-59 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8.7 | VP-ZDS-8.7 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-60 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8.8 | VP-ZDS-8.8 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-61 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-8.9 | VP-ZDS-8.9 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-62 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9 | VP-ZDS-9 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-63 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9.1 | VP-ZDS-9.1 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-64 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9.2 | VP-ZDS-9.2 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-65 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9.3 | VP-ZDS-9.3 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-66 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9.4 | VP-ZDS-9.4 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-67 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9.5 | VP-ZDS-9.5 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-68 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9.6 | VP-ZDS-9.6 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-69 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9.7 | VP-ZDS-9.7 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-70 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9.8 | VP-ZDS-9.8 | 1piece | JPY: 10,600 | USD: 66.45 |
|
|
 |
62-0431-71 | V-Coated XPM End Mill (for 2-Flute Counterbore Machining) VP-ZDS-9.9 | VP-ZDS-9.9 | 1piece | JPY: 10,600 | USD: 66.45 |
|