62-0268-59 ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X10
Check the Series LineupCheck the Series Lineup"init">
［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X10 62-0268-59 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
OSG Corporation
［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X10 62-0268-59 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
OSG Corporation
62-0268-59 ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X10
仕様
- Surface treatment: FX coating
- Helix angle: 30 degrees
- Securities Code: 822 -7162
| アズワン品番 | 62-0268-59 | |
|---|---|---|
| Model No. | FX-MG-TPBDS-R3X10 | |
| 標準価格 |
JPY: 31,625
USD: 196.77
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | 標準価格 | Valid price in Japan | アズワン在庫 [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
62-0267-96 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X10 | FX-MG-TPBDS-R0.8X10 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
 |
62-0267-97 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X15 | FX-MG-TPBDS-R0.8X15 | 1piece | JPY: 20,750 | USD: 129.11 |
-
|
|
 |
62-0267-98 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X2 | FX-MG-TPBDS-R0.8X2 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
 |
62-0267-99 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X3 | FX-MG-TPBDS-R0.8X3 | 1piece | JPY: 12,750 | USD: 79.33 |
-
|
|
 |
62-0268-01 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X5 | FX-MG-TPBDS-R0.8X5 | 1piece | JPY: 14,750 | USD: 91.78 |
-
|
|
 |
62-0268-02 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X7 | FX-MG-TPBDS-R0.8X7 | 1piece | JPY: 16,875 | USD: 105.00 |
-
|
|
 |
62-0268-03 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X0.5 | FX-MG-TPBDS-R1.25X0.5 | 1piece | JPY: 12,875 | USD: 80.11 |
-
|
|
 |
62-0268-04 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X1 | FX-MG-TPBDS-R1.25X1 | 1piece | JPY: 12,875 | USD: 80.11 |
-
|
|
 |
62-0268-05 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X1.5 | FX-MG-TPBDS-R1.25X1.5 | 1piece | JPY: 12,875 | USD: 80.11 |
-
|
|
 |
62-0268-06 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X10 | FX-MG-TPBDS-R1.25X10 | 1piece | JPY: 21,250 | USD: 132.22 |
-
|
|
 |
62-0268-07 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X15 | FX-MG-TPBDS-R1.25X15 | 1piece | JPY: 23,375 | USD: 145.44 |
-
|
|
 |
62-0268-08 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X2 | FX-MG-TPBDS-R1.25X2 | 1piece | JPY: 12,875 | USD: 80.11 |
-
|
|
 |
62-0268-09 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X2.5 | FX-MG-TPBDS-R1.25X2.5 | 1piece | JPY: 13,125 | USD: 81.66 |
-
|
|
 |
62-0268-10 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X3 | FX-MG-TPBDS-R1.25X3 | 1piece | JPY: 13,125 | USD: 81.66 |
-
|
|
 |
62-0268-11 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X4 | FX-MG-TPBDS-R1.25X4 | 1piece | JPY: 14,000 | USD: 87.11 |
-
|
|
 |
62-0268-12 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X5 | FX-MG-TPBDS-R1.25X5 | 1piece | JPY: 14,750 | USD: 91.78 |
-
|
|
 |
62-0268-13 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X7 | FX-MG-TPBDS-R1.25X7 | 1piece | JPY: 18,000 | USD: 112.00 |
-
|
|
 |
62-0268-14 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X0.5 | FX-MG-TPBDS-R1.5X0.5 | 1piece | JPY: 13,375 | USD: 83.22 |
-
|
|
 |
62-0268-15 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X1 | FX-MG-TPBDS-R1.5X1 | 1piece | JPY: 13,375 | USD: 83.22 |
-
|
|
 |
62-0268-16 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X1.5 | FX-MG-TPBDS-R1.5X1.5 | 1piece | JPY: 13,375 | USD: 83.22 |
-
|
|
 |
62-0268-17 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X10 | FX-MG-TPBDS-R1.5X10 | 1piece | JPY: 23,125 | USD: 143.88 |
-
|
|
 |
62-0268-18 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X15 | FX-MG-TPBDS-R1.5X15 | 1piece | JPY: 27,125 | USD: 168.77 |
-
|
|
 |
62-0268-19 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X2 | FX-MG-TPBDS-R1.5X2 | 1piece | JPY: 13,375 | USD: 83.22 |
-
|
|
 |
62-0268-20 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X2.5 | FX-MG-TPBDS-R1.5X2.5 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
 |
62-0268-21 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X3 | FX-MG-TPBDS-R1.5X3 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
 |
62-0268-22 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X4 | FX-MG-TPBDS-R1.5X4 | 1piece | JPY: 14,625 | USD: 91.00 |
-
|
|
 |
62-0268-23 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X5 | FX-MG-TPBDS-R1.5X5 | 1piece | JPY: 15,375 | USD: 95.66 |
-
|
|
 |
62-0268-24 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X7 | FX-MG-TPBDS-R1.5X7 | 1piece | JPY: 20,375 | USD: 126.77 |
-
|
|
 |
62-0268-25 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X0.5 | FX-MG-TPBDS-R1X0.5 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
 |
62-0268-26 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X1 | FX-MG-TPBDS-R1X1 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
 |
62-0268-27 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X1.5 | FX-MG-TPBDS-R1X1.5 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
 |
62-0268-28 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X10 | FX-MG-TPBDS-R1X10 | 1piece | JPY: 19,500 | USD: 121.33 |
-
|
|
 |
62-0268-29 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X15 | FX-MG-TPBDS-R1X15 | 1piece | JPY: 21,250 | USD: 132.22 |
-
|
|
 |
62-0268-30 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X2 | FX-MG-TPBDS-R1X2 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
 |
62-0268-31 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X2.5 | FX-MG-TPBDS-R1X2.5 | 1piece | JPY: 12,750 | USD: 79.33 |
-
|
|
 |
62-0268-32 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X3 | FX-MG-TPBDS-R1X3 | 1piece | JPY: 12,750 | USD: 79.33 |
-
|
|
 |
62-0268-33 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X4 | FX-MG-TPBDS-R1X4 | 1piece | JPY: 13,750 | USD: 85.55 |
-
|
|
 |
62-0268-34 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X5 | FX-MG-TPBDS-R1X5 | 1piece | JPY: 14,750 | USD: 91.78 |
-
|
|
 |
62-0268-35 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X7 | FX-MG-TPBDS-R1X7 | 1piece | JPY: 16,875 | USD: 105.00 |
-
|
|
 |
62-0268-36 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X0.5 | FX-MG-TPBDS-R2.5X0.5 | 1piece | JPY: 15,750 | USD: 98.00 |
-
|
|
 |
62-0268-37 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X1 | FX-MG-TPBDS-R2.5X1 | 1piece | JPY: 15,750 | USD: 98.00 |
-
|
|
 |
62-0268-38 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X1.5 | FX-MG-TPBDS-R2.5X1.5 | 1piece | JPY: 15,750 | USD: 98.00 |
-
|
|
 |
62-0268-39 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X10 | FX-MG-TPBDS-R2.5X10 | 1piece | JPY: 28,000 | USD: 174.22 |
-
|
|
 |
62-0268-40 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X2 | FX-MG-TPBDS-R2.5X2 | 1piece | JPY: 16,000 | USD: 99.55 |
-
|
|
 |
62-0268-41 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X3 | FX-MG-TPBDS-R2.5X3 | 1piece | JPY: 17,125 | USD: 106.55 |
-
|
|
 |
62-0268-42 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X4 | FX-MG-TPBDS-R2.5X4 | 1piece | JPY: 18,000 | USD: 112.00 |
-
|
|
 |
62-0268-43 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X5 | FX-MG-TPBDS-R2.5X5 | 1piece | JPY: 22,625 | USD: 140.77 |
-
|
|
 |
62-0268-44 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X7 | FX-MG-TPBDS-R2.5X7 | 1piece | JPY: 23,625 | USD: 147.00 |
-
|
|
 |
62-0268-45 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X0.5 | FX-MG-TPBDS-R2X0.5 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
 |
62-0268-46 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X1 | FX-MG-TPBDS-R2X1 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
 |
62-0268-47 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X1.5 | FX-MG-TPBDS-R2X1.5 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
 |
62-0268-48 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X10 | FX-MG-TPBDS-R2X10 | 1piece | JPY: 27,125 | USD: 168.77 |
-
|
|
 |
62-0268-49 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X15 | FX-MG-TPBDS-R2X15 | 1piece | JPY: 29,625 | USD: 184.33 |
-
|
|
 |
62-0268-50 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X2 | FX-MG-TPBDS-R2X2 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
 |
62-0268-51 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X2.5 | FX-MG-TPBDS-R2X2.5 | 1piece | JPY: 15,125 | USD: 94.11 |
-
|
|
 |
62-0268-52 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X3 | FX-MG-TPBDS-R2X3 | 1piece | JPY: 15,125 | USD: 94.11 |
-
|
|
 |
62-0268-53 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X4 | FX-MG-TPBDS-R2X4 | 1piece | JPY: 16,875 | USD: 105.00 |
-
|
|
 |
62-0268-54 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X5 | FX-MG-TPBDS-R2X5 | 1piece | JPY: 17,625 | USD: 109.66 |
-
|
|
 |
62-0268-55 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X7 | FX-MG-TPBDS-R2X7 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
 |
62-0268-56 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X0.5 | FX-MG-TPBDS-R3X0.5 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
 |
62-0268-57 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X1 | FX-MG-TPBDS-R3X1 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
 |
62-0268-58 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X1.5 | FX-MG-TPBDS-R3X1.5 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
 |
62-0268-59 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X10 | FX-MG-TPBDS-R3X10 | 1piece | JPY: 31,625 | USD: 196.77 |
-
|
|
 |
62-0268-60 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X2 | FX-MG-TPBDS-R3X2 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
 |
62-0268-61 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X3 | FX-MG-TPBDS-R3X3 | 1piece | JPY: 18,375 | USD: 114.33 |
-
|
|
 |
62-0268-62 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X4 | FX-MG-TPBDS-R3X4 | 1piece | JPY: 21,250 | USD: 132.22 |
-
|
|
 |
62-0268-63 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X5 | FX-MG-TPBDS-R3X5 | 1piece | JPY: 24,375 | USD: 151.66 |
-
|
|
 |
62-0268-64 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X7 | FX-MG-TPBDS-R3X7 | 1piece | JPY: 27,750 | USD: 172.66 |
-
|
|
 |
62-0268-65 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X0.5 | FX-MG-TPBDS-R4X0.5 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
 |
62-0268-66 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X1 | FX-MG-TPBDS-R4X1 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
 |
62-0268-67 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X1.5 | FX-MG-TPBDS-R4X1.5 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
 |
62-0268-68 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X2 | FX-MG-TPBDS-R4X2 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
 |
62-0268-69 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X3 | FX-MG-TPBDS-R4X3 | 1piece | JPY: 24,750 | USD: 154.00 |
-
|
|
 |
62-0268-70 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X4 | FX-MG-TPBDS-R4X4 | 1piece | JPY: 30,625 | USD: 190.55 |
-
|
|
 |
62-0268-71 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X5 | FX-MG-TPBDS-R4X5 | 1piece | JPY: 36,875 | USD: 229.44 |
-
|
|
 |
62-0268-72 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X7 | FX-MG-TPBDS-R4X7 | 1piece | JPY: 47,500 | USD: 295.55 |
-
|
|
 |
62-0268-73 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X0.5 | FX-MG-TPBDS-R5X0.5 | 1piece | JPY: 29,250 | USD: 181.99 |
-
|
|
 |
62-0268-74 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X1 | FX-MG-TPBDS-R5X1 | 1piece | JPY: 29,250 | USD: 181.99 |
-
|
|
 |
62-0268-75 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X1.5 | FX-MG-TPBDS-R5X1.5 | 1piece | JPY: 31,250 | USD: 194.44 |
-
|
|
 |
62-0268-76 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X2 | FX-MG-TPBDS-R5X2 | 1piece | JPY: 38,250 | USD: 237.99 |
-
|
|
 |
62-0268-77 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X3 | FX-MG-TPBDS-R5X3 | 1piece | JPY: 40,375 | USD: 251.21 |
-
|
|
 |
62-0268-78 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X4 | FX-MG-TPBDS-R5X4 | 1piece | JPY: 48,125 | USD: 299.43 |
-
|
|
 |
62-0268-79 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X5 | FX-MG-TPBDS-R5X5 | 1piece | JPY: 62,625 | USD: 389.65 |
-
|
|
 |
62-0268-80 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X7 | FX-MG-TPBDS-R5X7 | 1piece | JPY: 69,125 | USD: 430.10 |
-
|
|
 |
62-0268-81 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X0.5 | FX-MG-TPBDS-R6X0.5 | 1piece | JPY: 37,125 | USD: 230.99 |
-
|
|
 |
62-0268-82 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X1 | FX-MG-TPBDS-R6X1 | 1piece | JPY: 41,500 | USD: 258.21 |
-
|
|
 |
62-0268-83 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X1.5 | FX-MG-TPBDS-R6X1.5 | 1piece | JPY: 50,750 | USD: 315.77 |
-
|
|
 |
62-0268-84 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X2 | FX-MG-TPBDS-R6X2 | 1piece | JPY: 51,250 | USD: 318.88 |
-
|
|
 |
62-0268-85 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X3 | FX-MG-TPBDS-R6X3 | 1piece | JPY: 69,125 | USD: 430.10 |
-
|
|
 |
62-0268-86 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X4 | FX-MG-TPBDS-R6X4 | 1piece | JPY: 72,625 | USD: 451.87 |
-
|
|
 |
62-0268-87 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X5 | FX-MG-TPBDS-R6X5 | 1piece | JPY: 75,375 | USD: 468.98 |
-
|
|
 |
62-0268-88 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X7 | FX-MG-TPBDS-R6X7 | 1piece | JPY: 82,000 | USD: 510.20 |
-
|
This page is the page of ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init">
62-0268-59 ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X10
Spec
- Surface treatment: FX coating
- Helix angle: 30 degrees
- Securities Code: 822 -7162
| Order No. | 62-0268-59 | |
|---|---|---|
| Model No. | FX-MG-TPBDS-R3X10 | |
| Standard price |
JPY: 31,625
USD: 196.77
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
|
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
62-0267-96 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X10 | FX-MG-TPBDS-R0.8X10 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
|
62-0267-97 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X15 | FX-MG-TPBDS-R0.8X15 | 1piece | JPY: 20,750 | USD: 129.11 |
-
|
|
|
62-0267-98 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X2 | FX-MG-TPBDS-R0.8X2 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
|
62-0267-99 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X3 | FX-MG-TPBDS-R0.8X3 | 1piece | JPY: 12,750 | USD: 79.33 |
-
|
|
|
62-0268-01 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X5 | FX-MG-TPBDS-R0.8X5 | 1piece | JPY: 14,750 | USD: 91.78 |
-
|
|
|
62-0268-02 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R0.8X7 | FX-MG-TPBDS-R0.8X7 | 1piece | JPY: 16,875 | USD: 105.00 |
-
|
|
|
62-0268-03 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X0.5 | FX-MG-TPBDS-R1.25X0.5 | 1piece | JPY: 12,875 | USD: 80.11 |
-
|
|
|
62-0268-04 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X1 | FX-MG-TPBDS-R1.25X1 | 1piece | JPY: 12,875 | USD: 80.11 |
-
|
|
|
62-0268-05 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X1.5 | FX-MG-TPBDS-R1.25X1.5 | 1piece | JPY: 12,875 | USD: 80.11 |
-
|
|
|
62-0268-06 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X10 | FX-MG-TPBDS-R1.25X10 | 1piece | JPY: 21,250 | USD: 132.22 |
-
|
|
|
62-0268-07 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X15 | FX-MG-TPBDS-R1.25X15 | 1piece | JPY: 23,375 | USD: 145.44 |
-
|
|
|
62-0268-08 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X2 | FX-MG-TPBDS-R1.25X2 | 1piece | JPY: 12,875 | USD: 80.11 |
-
|
|
|
62-0268-09 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X2.5 | FX-MG-TPBDS-R1.25X2.5 | 1piece | JPY: 13,125 | USD: 81.66 |
-
|
|
|
62-0268-10 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X3 | FX-MG-TPBDS-R1.25X3 | 1piece | JPY: 13,125 | USD: 81.66 |
-
|
|
|
62-0268-11 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X4 | FX-MG-TPBDS-R1.25X4 | 1piece | JPY: 14,000 | USD: 87.11 |
-
|
|
|
62-0268-12 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X5 | FX-MG-TPBDS-R1.25X5 | 1piece | JPY: 14,750 | USD: 91.78 |
-
|
|
|
62-0268-13 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.25X7 | FX-MG-TPBDS-R1.25X7 | 1piece | JPY: 18,000 | USD: 112.00 |
-
|
|
|
62-0268-14 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X0.5 | FX-MG-TPBDS-R1.5X0.5 | 1piece | JPY: 13,375 | USD: 83.22 |
-
|
|
|
62-0268-15 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X1 | FX-MG-TPBDS-R1.5X1 | 1piece | JPY: 13,375 | USD: 83.22 |
-
|
|
|
62-0268-16 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X1.5 | FX-MG-TPBDS-R1.5X1.5 | 1piece | JPY: 13,375 | USD: 83.22 |
-
|
|
|
62-0268-17 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X10 | FX-MG-TPBDS-R1.5X10 | 1piece | JPY: 23,125 | USD: 143.88 |
-
|
|
|
62-0268-18 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X15 | FX-MG-TPBDS-R1.5X15 | 1piece | JPY: 27,125 | USD: 168.77 |
-
|
|
|
62-0268-19 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X2 | FX-MG-TPBDS-R1.5X2 | 1piece | JPY: 13,375 | USD: 83.22 |
-
|
|
|
62-0268-20 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X2.5 | FX-MG-TPBDS-R1.5X2.5 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
|
62-0268-21 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X3 | FX-MG-TPBDS-R1.5X3 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
|
62-0268-22 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X4 | FX-MG-TPBDS-R1.5X4 | 1piece | JPY: 14,625 | USD: 91.00 |
-
|
|
|
62-0268-23 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X5 | FX-MG-TPBDS-R1.5X5 | 1piece | JPY: 15,375 | USD: 95.66 |
-
|
|
|
62-0268-24 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1.5X7 | FX-MG-TPBDS-R1.5X7 | 1piece | JPY: 20,375 | USD: 126.77 |
-
|
|
|
62-0268-25 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X0.5 | FX-MG-TPBDS-R1X0.5 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
|
62-0268-26 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X1 | FX-MG-TPBDS-R1X1 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
|
62-0268-27 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X1.5 | FX-MG-TPBDS-R1X1.5 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
|
62-0268-28 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X10 | FX-MG-TPBDS-R1X10 | 1piece | JPY: 19,500 | USD: 121.33 |
-
|
|
|
62-0268-29 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X15 | FX-MG-TPBDS-R1X15 | 1piece | JPY: 21,250 | USD: 132.22 |
-
|
|
|
62-0268-30 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X2 | FX-MG-TPBDS-R1X2 | 1piece | JPY: 12,350 | USD: 76.84 |
-
|
|
|
62-0268-31 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X2.5 | FX-MG-TPBDS-R1X2.5 | 1piece | JPY: 12,750 | USD: 79.33 |
-
|
|
|
62-0268-32 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X3 | FX-MG-TPBDS-R1X3 | 1piece | JPY: 12,750 | USD: 79.33 |
-
|
|
|
62-0268-33 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X4 | FX-MG-TPBDS-R1X4 | 1piece | JPY: 13,750 | USD: 85.55 |
-
|
|
|
62-0268-34 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X5 | FX-MG-TPBDS-R1X5 | 1piece | JPY: 14,750 | USD: 91.78 |
-
|
|
|
62-0268-35 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R1X7 | FX-MG-TPBDS-R1X7 | 1piece | JPY: 16,875 | USD: 105.00 |
-
|
|
|
62-0268-36 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X0.5 | FX-MG-TPBDS-R2.5X0.5 | 1piece | JPY: 15,750 | USD: 98.00 |
-
|
|
|
62-0268-37 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X1 | FX-MG-TPBDS-R2.5X1 | 1piece | JPY: 15,750 | USD: 98.00 |
-
|
|
|
62-0268-38 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X1.5 | FX-MG-TPBDS-R2.5X1.5 | 1piece | JPY: 15,750 | USD: 98.00 |
-
|
|
|
62-0268-39 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X10 | FX-MG-TPBDS-R2.5X10 | 1piece | JPY: 28,000 | USD: 174.22 |
-
|
|
|
62-0268-40 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X2 | FX-MG-TPBDS-R2.5X2 | 1piece | JPY: 16,000 | USD: 99.55 |
-
|
|
|
62-0268-41 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X3 | FX-MG-TPBDS-R2.5X3 | 1piece | JPY: 17,125 | USD: 106.55 |
-
|
|
|
62-0268-42 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X4 | FX-MG-TPBDS-R2.5X4 | 1piece | JPY: 18,000 | USD: 112.00 |
-
|
|
|
62-0268-43 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X5 | FX-MG-TPBDS-R2.5X5 | 1piece | JPY: 22,625 | USD: 140.77 |
-
|
|
|
62-0268-44 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2.5X7 | FX-MG-TPBDS-R2.5X7 | 1piece | JPY: 23,625 | USD: 147.00 |
-
|
|
|
62-0268-45 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X0.5 | FX-MG-TPBDS-R2X0.5 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
|
62-0268-46 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X1 | FX-MG-TPBDS-R2X1 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
|
62-0268-47 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X1.5 | FX-MG-TPBDS-R2X1.5 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
|
62-0268-48 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X10 | FX-MG-TPBDS-R2X10 | 1piece | JPY: 27,125 | USD: 168.77 |
-
|
|
|
62-0268-49 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X15 | FX-MG-TPBDS-R2X15 | 1piece | JPY: 29,625 | USD: 184.33 |
-
|
|
|
62-0268-50 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X2 | FX-MG-TPBDS-R2X2 | 1piece | JPY: 13,875 | USD: 86.33 |
-
|
|
|
62-0268-51 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X2.5 | FX-MG-TPBDS-R2X2.5 | 1piece | JPY: 15,125 | USD: 94.11 |
-
|
|
|
62-0268-52 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X3 | FX-MG-TPBDS-R2X3 | 1piece | JPY: 15,125 | USD: 94.11 |
-
|
|
|
62-0268-53 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X4 | FX-MG-TPBDS-R2X4 | 1piece | JPY: 16,875 | USD: 105.00 |
-
|
|
|
62-0268-54 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X5 | FX-MG-TPBDS-R2X5 | 1piece | JPY: 17,625 | USD: 109.66 |
-
|
|
|
62-0268-55 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R2X7 | FX-MG-TPBDS-R2X7 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
|
62-0268-56 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X0.5 | FX-MG-TPBDS-R3X0.5 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
|
62-0268-57 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X1 | FX-MG-TPBDS-R3X1 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
|
62-0268-58 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X1.5 | FX-MG-TPBDS-R3X1.5 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
|
62-0268-59 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X10 | FX-MG-TPBDS-R3X10 | 1piece | JPY: 31,625 | USD: 196.77 |
-
|
|
|
62-0268-60 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X2 | FX-MG-TPBDS-R3X2 | 1piece | JPY: 17,375 | USD: 108.11 |
-
|
|
|
62-0268-61 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X3 | FX-MG-TPBDS-R3X3 | 1piece | JPY: 18,375 | USD: 114.33 |
-
|
|
|
62-0268-62 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X4 | FX-MG-TPBDS-R3X4 | 1piece | JPY: 21,250 | USD: 132.22 |
-
|
|
|
62-0268-63 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X5 | FX-MG-TPBDS-R3X5 | 1piece | JPY: 24,375 | USD: 151.66 |
-
|
|
|
62-0268-64 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R3X7 | FX-MG-TPBDS-R3X7 | 1piece | JPY: 27,750 | USD: 172.66 |
-
|
|
|
62-0268-65 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X0.5 | FX-MG-TPBDS-R4X0.5 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
|
62-0268-66 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X1 | FX-MG-TPBDS-R4X1 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
|
62-0268-67 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X1.5 | FX-MG-TPBDS-R4X1.5 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
|
62-0268-68 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X2 | FX-MG-TPBDS-R4X2 | 1piece | JPY: 22,125 | USD: 137.66 |
-
|
|
|
62-0268-69 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X3 | FX-MG-TPBDS-R4X3 | 1piece | JPY: 24,750 | USD: 154.00 |
-
|
|
|
62-0268-70 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X4 | FX-MG-TPBDS-R4X4 | 1piece | JPY: 30,625 | USD: 190.55 |
-
|
|
|
62-0268-71 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X5 | FX-MG-TPBDS-R4X5 | 1piece | JPY: 36,875 | USD: 229.44 |
-
|
|
|
62-0268-72 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R4X7 | FX-MG-TPBDS-R4X7 | 1piece | JPY: 47,500 | USD: 295.55 |
-
|
|
|
62-0268-73 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X0.5 | FX-MG-TPBDS-R5X0.5 | 1piece | JPY: 29,250 | USD: 181.99 |
-
|
|
|
62-0268-74 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X1 | FX-MG-TPBDS-R5X1 | 1piece | JPY: 29,250 | USD: 181.99 |
-
|
|
|
62-0268-75 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X1.5 | FX-MG-TPBDS-R5X1.5 | 1piece | JPY: 31,250 | USD: 194.44 |
-
|
|
|
62-0268-76 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X2 | FX-MG-TPBDS-R5X2 | 1piece | JPY: 38,250 | USD: 237.99 |
-
|
|
|
62-0268-77 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X3 | FX-MG-TPBDS-R5X3 | 1piece | JPY: 40,375 | USD: 251.21 |
-
|
|
|
62-0268-78 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X4 | FX-MG-TPBDS-R5X4 | 1piece | JPY: 48,125 | USD: 299.43 |
-
|
|
|
62-0268-79 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X5 | FX-MG-TPBDS-R5X5 | 1piece | JPY: 62,625 | USD: 389.65 |
-
|
|
|
62-0268-80 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R5X7 | FX-MG-TPBDS-R5X7 | 1piece | JPY: 69,125 | USD: 430.10 |
-
|
|
|
62-0268-81 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X0.5 | FX-MG-TPBDS-R6X0.5 | 1piece | JPY: 37,125 | USD: 230.99 |
-
|
|
|
62-0268-82 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X1 | FX-MG-TPBDS-R6X1 | 1piece | JPY: 41,500 | USD: 258.21 |
-
|
|
|
62-0268-83 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X1.5 | FX-MG-TPBDS-R6X1.5 | 1piece | JPY: 50,750 | USD: 315.77 |
-
|
|
|
62-0268-84 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X2 | FX-MG-TPBDS-R6X2 | 1piece | JPY: 51,250 | USD: 318.88 |
-
|
|
|
62-0268-85 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X3 | FX-MG-TPBDS-R6X3 | 1piece | JPY: 69,125 | USD: 430.10 |
-
|
|
|
62-0268-86 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X4 | FX-MG-TPBDS-R6X4 | 1piece | JPY: 72,625 | USD: 451.87 |
-
|
|
|
62-0268-87 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X5 | FX-MG-TPBDS-R6X5 | 1piece | JPY: 75,375 | USD: 468.98 |
-
|
|
|
62-0268-88 | ［Discontinued］Carbide Tapered Ball End Mill FX Coated 2-Flute Short FX-MG-TPBDS-R6X7 | FX-MG-TPBDS-R6X7 | 1piece | JPY: 82,000 | USD: 510.20 |
-
|