Uses two types of main and sub indicators and a jog dial with a center switch. The operation can be performed easily and quickly by the interactive mode using katakana display and by calling the setting information and checking the setting only by the dial section.
Auto start, auto stop operation, and up to 16 segment program operation (Repeated operation and gradient operation) are possible.
In addition to the self-diagnosis function, it is equipped with an independent excessive rise prevention device and a key lock function to enhance the maintenance function and erroneous operation prevention function.
High quality alumina porcelain heat plate is placed inside the furnace, and the heater is not exposed inside the furnace, so contamination to the sample can be prevented. R thermocouple is used for the temperature sensor and has a long life.
N2 gas introduction device (with flowmeter), temperature recording output terminal, RS232C, etc., are all available to meet the diverse needs of customers. We also provide an exhaust unit that can efficiently discharge gas generated in the furnace.
Spec
Temperature control range: 100 - 1,150℃
Temperature control accuracy: +/- 1.5℃ (at 1,150℃)
Room temperature maximum temperature reaching time: Approximately 80 minutes
Internal dimensions (Width x Depth x Height) mm: 300 x 250 x 150
Outer dimensions (Width x Depth x Height) mm: 507 x 504 x 626
Uses two types of main and sub indicators and a jog dial with a center switch. The operation can be performed easily and quickly by the interactive mode using katakana display and by calling the setting information and checking the setting only by the dial section.
Auto start, auto stop operation, and up to 16 segment program operation (Repeated operation and gradient operation) are possible.
In addition to the self-diagnosis function, it is equipped with an independent excessive rise prevention device and a key lock function to enhance the maintenance function and erroneous operation prevention function.
High quality alumina porcelain heat plate is placed inside the furnace, and the heater is not exposed inside the furnace, so contamination to the sample can be prevented. R thermocouple is used for the temperature sensor and has a long life.
N2 gas introduction device (with flowmeter), temperature recording output terminal, RS232C, etc., are all available to meet the diverse needs of customers. We also provide an exhaust unit that can efficiently discharge gas generated in the furnace.
Spec
Temperature control range: 100 - 1,150℃
Temperature control accuracy: +/- 1.5℃ (at 1,150℃)
Room temperature maximum temperature reaching time: Approximately 80 minutes
Internal dimensions (Width x Depth x Height) mm: 300 x 250 x 150
Outer dimensions (Width x Depth x Height) mm: 507 x 504 x 626
Uses two types of main and sub indicators and a jog dial with a center switch. The operation can be performed easily and quickly by the interactive mode using katakana display and by calling the setting information and checking the setting only by the dial section.
Auto start, auto stop operation, and up to 16 segment program operation (Repeated operation and gradient operation) are possible.
In addition to the self-diagnosis function, it is equipped with an independent excessive rise prevention device and a key lock function to enhance the maintenance function and erroneous operation prevention function.
High quality alumina porcelain heat plate is placed inside the furnace, and the heater is not exposed inside the furnace, so contamination to the sample can be prevented. R thermocouple is used for the temperature sensor and has a long life.
N2 gas introduction device (with flowmeter), temperature recording output terminal, RS232C, etc., are all available to meet the diverse needs of customers. We also provide an exhaust unit that can efficiently discharge gas generated in the furnace.
仕様
Temperature control range: 100 - 1,150℃
Temperature control accuracy: +/- 1.5℃ (at 1,150℃)
Room temperature maximum temperature reaching time: Approximately 80 minutes
Internal dimensions (Width x Depth x Height) mm: 300 x 250 x 150
Outer dimensions (Width x Depth x Height) mm: 507 x 504 x 626
Uses two types of main and sub indicators and a jog dial with a center switch. The operation can be performed easily and quickly by the interactive mode using katakana display and by calling the setting information and checking the setting only by the dial section.
Auto start, auto stop operation, and up to 16 segment program operation (Repeated operation and gradient operation) are possible.
In addition to the self-diagnosis function, it is equipped with an independent excessive rise prevention device and a key lock function to enhance the maintenance function and erroneous operation prevention function.
High quality alumina porcelain heat plate is placed inside the furnace, and the heater is not exposed inside the furnace, so contamination to the sample can be prevented. R thermocouple is used for the temperature sensor and has a long life.
N2 gas introduction device (with flowmeter), temperature recording output terminal, RS232C, etc., are all available to meet the diverse needs of customers. We also provide an exhaust unit that can efficiently discharge gas generated in the furnace.
仕様
Temperature control range: 100 - 1,150℃
Temperature control accuracy: +/- 1.5℃ (at 1,150℃)
Room temperature maximum temperature reaching time: Approximately 80 minutes
Internal dimensions (Width x Depth x Height) mm: 300 x 250 x 150
Outer dimensions (Width x Depth x Height) mm: 507 x 504 x 626
