61-7839-50 ［Discontinued］TAC Cutter TAW13R160M50.8-10
Features
- Simulation analysis achieves high rigidity, low resistance and weight reduction.
- Outstanding low resistance and reliable defect resistance.
- Both the body and the tip are extremely sharp with a large rake angle.
- The tip uses a double relief angle.
- Excellent sharpness with the use of incrementation.
- Achieves a rake angle of 27° with exceptionally low resistance (for ML breakers).
- Double relief improves cutting edge strength.
- The outer cutting edge has a two-stage escape surface to dramatically improve defect resistance.
- The accuracy of the front and outer run-out to the body is greatly improved, and the quality of the machined surface is greatly improved.
- Corrosion resistance and abrasion resistance are improved by special surface treatment.
- Applicable Work Material: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metals
- For general purpose machining.
- For front and chamfer machining.
Spec
- Rake Angle (°): A.R. + 17 to + 20/R.R. -16 to -11
- Cut Max.; mm): Flat Top 5/MJ, MS, AJ/4/ML/2.5/HJ/2
- number of blades : 10
- outer diameter (φDc; mm ) : 160
- Maximum outer diameter (φD1); mm ) : 174
- Hole Diameter (φd); mm ) : 50.8
- Mounting hole height (l); mm ) : 40
- Cutter Height (Lf; mm ) : 63
- End keyway depth (b); mm ) : 11
- End keyway width (a); mm ) : 19
- Weight ( kg ) : 4.4
- Air holes: none
- Parts Used: Deposit setting screw (DTS5 -3.5 SS), Deposit (FSSA 1102), Tightening screw (CSPB -3.5), Spanner (P -3.5), Driver (IP -15 D)
- Use Insert: SWMT 13 T3 AFPR-MJ/SWMT 13 T3 AFER-ML/SWMW 13 T3 AFTR/SWMT 13 T3 AFPR-HJ/SWMT 13 T3 AFPR-MS/SWGT 13 T3 AFFR-AJ/SWGT 13 T3 AFPR-MJ/WWCW 13 T3 AFER-WS/WWCW 13 T3 AFFR-WS/WWCW 13 T3 AFFR-WS
| Order No. | 61-7839-50 | |
|---|---|---|
| Model No. | TAW13R160M50.8-10 | |
| JAN Code | 06849801 | |
| Standard price |
JPY: 114,000
USD: 715.09
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
61-7839-50 | ［Discontinued］TAC Cutter TAW13R160M50.8-10 | TAW13R160M50.8-10 | 1piece | JPY: 114,000 | USD: 715.09 |
-
|
|
 |
61-7839-51 | ［Discontinued］TAC Cutter TAW13R200M47.6-08 | TAW13R200M47.6-08 | 1piece | JPY: 100,000 | USD: 627.27 |
-
|