61-7826-91 ［Discontinued］TAC Cutting tool T40V-PDUNR15C
FeaturesFeatures class="init">
［Discontinued］TAC Cutting tool T40V-PDUNR15C 61-7826-91 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
TUNGALOY CORPORATION
61-7826-91 ［Discontinued］TAC Cutting tool T40V-PDUNR15C
特徴
- Round shank hole boring bite.
- Due to the double surface constraint type, the reproducibility of the cutting edge position is good.
- Negative type.
- Lever lock type.
- "Tsutari Ichiban" is a high rigidity shank made by adding carbide reinforcement to a steel shank.
- Excellent performance in chatter resistance.
- Low price close to steel shank.
- With coolant through.
- For inner diameter and patterned cutting.
Spec
- Katte: R
- Minimum Processing Diameter (φDm; mm ) : 50
- Oil Hole: Rc 1/2
- Shank Diameter (φDs); mm ) : 40
- Blade-tip Distance (f; mm ) : 27
- Total length (L1; mm ) : 400
- head length (L2; mm ) : 55
- Dimensions L3 ( mm ) : 88
- Shank Height (h; mm ) : 37
- Dimensions b (mm): -
- Dimensions alpha ( degrees ) : 10
- Reference corner rε: 0.8
- Usage Insert: DN □ 1504 □
- Parts Used: Tightening screw (LCS4)/Spanner (P -3)/Lever (LCL4)/Deposit (LSD 42 BL)/Spring (LSP4)
- *For self-insert, use left to right cutting type right to left cutting type (L) insert for holder (PDUNR to) and left to right cutting type (R) right to left cutting type insert for holder (PDUNL to).
-
Order No.
61-7826-91
Model No.
T40V-PDUNR15C
Standard price
JPY: 151,000
USD: 947.18
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
![<!--@[ia-1]@-->取扱停止<!--@/[ia-1]@-->](/en/asone/img/usestop_en_US.png?v=897ccfaa5270bed4dad0662a8ca3207d7ee0ddc44)
在庫数
-
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
QuantityQuantityass="init">
［Discontinued］TAC Cutting tool T40V-PDUNR15C 61-7826-91 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
TUNGALOY CORPORATION
61-7826-91 ［Discontinued］TAC Cutting tool T40V-PDUNR15C
特徴
- Round shank hole boring bite.
- Due to the double surface constraint type, the reproducibility of the cutting edge position is good.
- Negative type.
- Lever lock type.
- "Tsutari Ichiban" is a high rigidity shank made by adding carbide reinforcement to a steel shank.
- Excellent performance in chatter resistance.
- Low price close to steel shank.
- With coolant through.
- For inner diameter and patterned cutting.
仕様
- Katte: R
- Minimum Processing Diameter (φDm; mm ) : 50
- Oil Hole: Rc 1/2
- Shank Diameter (φDs); mm ) : 40
- Blade-tip Distance (f; mm ) : 27
- Total length (L1; mm ) : 400
- head length (L2; mm ) : 55
- Dimensions L3 ( mm ) : 88
- Shank Height (h; mm ) : 37
- Dimensions b (mm): -
- Dimensions alpha ( degrees ) : 10
- Reference corner rε: 0.8
- Usage Insert: DN □ 1504 □
- Parts Used: Tightening screw (LCS4)/Spanner (P -3)/Lever (LCL4)/Deposit (LSD 42 BL)/Spring (LSP4)
- *For self-insert, use left to right cutting type right to left cutting type (L) insert for holder (PDUNR to) and left to right cutting type (R) right to left cutting type insert for holder (PDUNL to).
-
アズワン品番
61-7826-91
型番
T40V-PDUNR15C
標準価格
JPY: 151,000
USD: 947.18
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
Stock in Japan
-
61-7826-91 ［Discontinued］TAC Cutting tool T40V-PDUNR15C
特徴
- Round shank hole boring bite.
- Due to the double surface constraint type, the reproducibility of the cutting edge position is good.
- Negative type.
- Lever lock type.
- "Tsutari Ichiban" is a high rigidity shank made by adding carbide reinforcement to a steel shank.
- Excellent performance in chatter resistance.
- Low price close to steel shank.
- With coolant through.
- For inner diameter and patterned cutting.
Spec
- Katte: R
- Minimum Processing Diameter (φDm; mm ) : 50
- Oil Hole: Rc 1/2
- Shank Diameter (φDs); mm ) : 40
- Blade-tip Distance (f; mm ) : 27
- Total length (L1; mm ) : 400
- head length (L2; mm ) : 55
- Dimensions L3 ( mm ) : 88
- Shank Height (h; mm ) : 37
- Dimensions b (mm): -
- Dimensions alpha ( degrees ) : 10
- Reference corner rε: 0.8
- Usage Insert: DN □ 1504 □
- Parts Used: Tightening screw (LCS4)/Spanner (P -3)/Lever (LCL4)/Deposit (LSD 42 BL)/Spring (LSP4)
- *For self-insert, use left to right cutting type right to left cutting type (L) insert for holder (PDUNR to) and left to right cutting type (R) right to left cutting type insert for holder (PDUNL to).
| Order No. | 61-7826-91 | |
|---|---|---|
| Model No. | T40V-PDUNR15C | |
| Standard price |
JPY: 151,000
USD: 947.18
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
|
|
||
| 在庫数 | - | |
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | QuantityQuantityass="init">
61-7826-91 ［Discontinued］TAC Cutting tool T40V-PDUNR15C特徴
仕様
| |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|