Energy-saving measures: Achieves industry-leading high efficiency in exhaust speed per motor rated output of 1 [W].
Lightweight and compact: Uses a special rotor shape to save space.
Low operating noise and vibration: Achieves low operating noise and vibration through a thorough balance design for rotating parts.
Low heat generation: Uses forced air cooling to achieve low heat generation.
Long life: No maintenance required for about 30,000 hours. (Varies according to operating conditions and environment.). This is not a guaranteed value. )
Low dust generation: Controlling pollution to the surrounding environment.
Equipped with a power switch, you can simply plug it into an outlet and use it immediately.
仕様
Type: Medium vacuum 30L
Number of connected cylinders: 2 strand
Cylinder piping type: Series connection
Exhaust speed (L/min): 50Hz: 30
Exhaust speed (L/min): 60Hz: 36
Ultimate vacuum pressure (Pa abs): 50Hz: ? 350
Ultimate vacuum pressure (Pa abs): 60Hz: ? 300
Ultimate vacuum pressure (kPa G): 50Hz: ? -100.95
Ultimate vacuum pressure (kPa G): 60Hz: ? -101.0
Maximum suction pressure: Atmospheric pressure
Ambient environment temperature (indoor) (℃): -5 - 40
Ambient environment humidity (indoor): 85% RH or less (non condensing)
Atmosphere (inhalation gas): Atmosphere where no corrosive and flammable gas
Installation location vibration: 4.9m/s2 or less (10 - 60Hz)
Altitude of installation location: Altitude of 1,000m or lower
Installation posture: Installed with motor shaft horizontal
Electric motor: Output (W): -40, Type: Single phase condenser type, induction motor thermal protector integrated, heat resistance class 130 (B), Voltage (V): 100, Rated current (A): 50Hz: 0.83, 60Hz: 0.7, Rated rotation speed (min￣1): 50Hz: 1250, 60Hz: 1,600, Starting current (A): 50Hz: 1.7, 60Hz 1.5
Operation noise (dB (A)): 50Hz: ? 58, 60Hz: ? 63 (*Operation noise depends on the conditions of use and cannot be guaranteed because it is based on the measured value excluding inlet noise and discharge noise. )
Inlet port connection port size: G3/8
Exhaust port connection port size: G1/4
Dimensions (all width x depth x overall height) (mm): 125 x 289.6 x 180.7
Mass (kg): 7.6 (*including accessories)
Cooling method: Forced air cooling
Power switch is built-in type. Also, Note that it does not conform to the CE marking.
RoHS supported
Motor type: Single phase 100V, Induction motor with power switch
Intake side fitting: One touch fitting straight: Applied tube diameter φ12mm, Connection screw size: G3/8
Exhaust side fitting: One touch fitting straight: Applied tube diameter φ12mm, Connection screw size: G1/4
Energy-saving measures: Achieves industry-leading high efficiency in exhaust speed per motor rated output of 1 [W].
Lightweight and compact: Uses a special rotor shape to save space.
Low operating noise and vibration: Achieves low operating noise and vibration through a thorough balance design for rotating parts.
Low heat generation: Uses forced air cooling to achieve low heat generation.
Long life: No maintenance required for about 30,000 hours. (Varies according to operating conditions and environment.). This is not a guaranteed value. )
Low dust generation: Controlling pollution to the surrounding environment.
Equipped with a power switch, you can simply plug it into an outlet and use it immediately.
仕様
Type: Medium vacuum 30L
Number of connected cylinders: 2 strand
Cylinder piping type: Series connection
Exhaust speed (L/min): 50Hz: 30
Exhaust speed (L/min): 60Hz: 36
Ultimate vacuum pressure (Pa abs): 50Hz: ? 350
Ultimate vacuum pressure (Pa abs): 60Hz: ? 300
Ultimate vacuum pressure (kPa G): 50Hz: ? -100.95
Ultimate vacuum pressure (kPa G): 60Hz: ? -101.0
Maximum suction pressure: Atmospheric pressure
Ambient environment temperature (indoor) (℃): -5 - 40
Ambient environment humidity (indoor): 85% RH or less (non condensing)
Atmosphere (inhalation gas): Atmosphere where no corrosive and flammable gas
Installation location vibration: 4.9m/s2 or less (10 - 60Hz)
Altitude of installation location: Altitude of 1,000m or lower
Installation posture: Installed with motor shaft horizontal
Electric motor: Output (W): -40, Type: Single phase condenser type, induction motor thermal protector integrated, heat resistance class 130 (B), Voltage (V): 100, Rated current (A): 50Hz: 0.83, 60Hz: 0.7, Rated rotation speed (min￣1): 50Hz: 1250, 60Hz: 1,600, Starting current (A): 50Hz: 1.7, 60Hz 1.5
Operation noise (dB (A)): 50Hz: ? 58, 60Hz: ? 63 (*Operation noise depends on the conditions of use and cannot be guaranteed because it is based on the measured value excluding inlet noise and discharge noise. )
Inlet port connection port size: G3/8
Exhaust port connection port size: G1/4
Dimensions (all width x depth x overall height) (mm): 125 x 289.6 x 180.7
Mass (kg): 7.6 (*including accessories)
Cooling method: Forced air cooling
Power switch is built-in type. Also, Note that it does not conform to the CE marking.
RoHS supported
Motor type: Single phase 100V, Induction motor with power switch
Intake side fitting: One touch fitting straight: Applied tube diameter φ12mm, Connection screw size: G3/8
Exhaust side fitting: One touch fitting straight: Applied tube diameter φ12mm, Connection screw size: G1/4
