61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
Check the Series LineupCheck the Series Lineup"init">
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
FeaturesFeatures class="init">
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
FeaturesFeatures class="init">
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
Features
- Kinematic mirror holder in which the mirror reflecting surface does not offset from the rod axis even if the mirror thickness changes.
- The mirror reflection side is fixed so that it stops at the mirror frame butt.
- When the rod is attached to this mirror holder, the center axis of the rod coincides with the reflecting surface of the element, so that the center of the mirror does not deviate from the optical axis even when it is placed at an angle of 45 degrees on the optical bench.
- Since the transmission beam can be taken out in one direction, it can also be used as a beamsplitter holder.
- The mirror frame is built into the holder's supporting parts, reducing the thickness of the holder.
- The Kinematic Mirror Holder (MHG) allows more space for adjustment operations.
- The mounting of the holder can be fixed with the M4 accessory lower head screw from above and the M6 rod from below.
- (MHI-12.7 can be fixed with M3 attached lower head screw from above and M4 rod from below.)
- By using the positioning hole (φ3H7) of the mirror holder and pinning it to the base, the orientation of the mirror holder can be fixed to the designed position.
- (Positioning hole of MHI‐12.7 is φ2H7)
- A gimbal type upward operation mirror (BSHL) is also available, in which the center of rotation of fine adjustment coincides with the center of the mirror.
- * MHI-12.7 is limited to tailgating ±1° and rotation ±2° even when using a low-head, small-head hexagon socket head socket head bolt.
- * When installing the mirror and fixing it with the low-head hexagon socket head bolt, the hexagon wrench may interfere with the mirror.
- * Turn the rotary/aori adjustment screw to retract the mirror and tighten the bolt.
- * When the mirror holder is fixed to the base with M4 low head hexagon socket head bolt, the clearance is ±1 mm.
SpecSpec class="init">
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
特徴
- Kinematic mirror holder in which the mirror reflecting surface does not offset from the rod axis even if the mirror thickness changes.
- The mirror reflection side is fixed so that it stops at the mirror frame butt.
- When the rod is attached to this mirror holder, the center axis of the rod coincides with the reflecting surface of the element, so that the center of the mirror does not deviate from the optical axis even when it is placed at an angle of 45 degrees on the optical bench.
- Since the transmission beam can be taken out in one direction, it can also be used as a beamsplitter holder.
- The mirror frame is built into the holder's supporting parts, reducing the thickness of the holder.
- The Kinematic Mirror Holder (MHG) allows more space for adjustment operations.
- The mounting of the holder can be fixed with the M4 accessory lower head screw from above and the M6 rod from below.
- (MHI-12.7 can be fixed with M3 attached lower head screw from above and M4 rod from below.)
- By using the positioning hole (φ3H7) of the mirror holder and pinning it to the base, the orientation of the mirror holder can be fixed to the designed position.
- (Positioning hole of MHI‐12.7 is φ2H7)
- A gimbal type upward operation mirror (BSHL) is also available, in which the center of rotation of fine adjustment coincides with the center of the mirror.
- * MHI-12.7 is limited to tailgating ±1° and rotation ±2° even when using a low-head, small-head hexagon socket head socket head bolt.
- * When installing the mirror and fixing it with the low-head hexagon socket head bolt, the hexagon wrench may interfere with the mirror.
- * Turn the rotary/aori adjustment screw to retract the mirror and tighten the bolt.
- * When the mirror holder is fixed to the base with M4 low head hexagon socket head bolt, the clearance is ±1 mm.
SpecSpec class="init">
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
特徴
- Kinematic mirror holder in which the mirror reflecting surface does not offset from the rod axis even if the mirror thickness changes.
- The mirror reflection side is fixed so that it stops at the mirror frame butt.
- When the rod is attached to this mirror holder, the center axis of the rod coincides with the reflecting surface of the element, so that the center of the mirror does not deviate from the optical axis even when it is placed at an angle of 45 degrees on the optical bench.
- Since the transmission beam can be taken out in one direction, it can also be used as a beamsplitter holder.
- The mirror frame is built into the holder's supporting parts, reducing the thickness of the holder.
- The Kinematic Mirror Holder (MHG) allows more space for adjustment operations.
- The mounting of the holder can be fixed with the M4 accessory lower head screw from above and the M6 rod from below.
- (MHI-12.7 can be fixed with M3 attached lower head screw from above and M4 rod from below.)
- By using the positioning hole (φ3H7) of the mirror holder and pinning it to the base, the orientation of the mirror holder can be fixed to the designed position.
- (Positioning hole of MHI‐12.7 is φ2H7)
- A gimbal type upward operation mirror (BSHL) is also available, in which the center of rotation of fine adjustment coincides with the center of the mirror.
- * MHI-12.7 is limited to tailgating ±1° and rotation ±2° even when using a low-head, small-head hexagon socket head socket head bolt.
- * When installing the mirror and fixing it with the low-head hexagon socket head bolt, the hexagon wrench may interfere with the mirror.
- * Turn the rotary/aori adjustment screw to retract the mirror and tighten the bolt.
- * When the mirror holder is fixed to the base with M4 low head hexagon socket head bolt, the clearance is ±1 mm.
仕様
- [
common specification]
- Main material: Aluminum (brass only for MHI-12.7)
- Surface treatment: Black anodic oxide (super black chrome only for MHI-12.7)
- [Individual specification]
- Compatible optics size: φ25.4mm, φ25mm
- Compatible optics thickness: 3 - 10mm
- Effective diameter: φ23mm
- 45 degrees incidence reflective beam diameter: φ15.5mm
- 45 degrees incident transmittance hole diameter: φ13mm *When light is transmitted through a BK7 plane parallel substrate of 3mm thickness
- Adjustment range, tilt: ±1.5°
- Adjustment range, rotation: ±1.5°
- Resolution, tilt: Approximately 0.4°/rotation
- Resolution, rotation: Approximately 0.4°/rotation
- Mass: 0.12kg
- RoHS conform product
-
Order No.
61-6997-35
型番
MHI-25.4-UU
標準価格
JPY: 13,800
USD: 85.86
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
61-6997-32
Kinematic Center Mirror Mount Adaptive Element Size Φ12.7mm Compatible Optics Thickness 2 - 9mm MHI-12.7
MHI-12.7
1piece
JPY: 13,800
USD: 85.86
61-6997-33
Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4
MHI-25.4
1piece
JPY: 13,800
USD: 85.86
61-6997-34
Kinematic Center Mirror Mount Adaptive Element Size Φ30mm Adaptive Element Thickness 3 - 10mm MHI-30
MHI-30
1piece
JPY: 13,800
USD: 85.86
61-6997-35
Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
MHI-25.4-UU
1piece
JPY: 13,800
USD: 85.86
61-6997-36
Kinematic Center Mirror Mount Adaptive Element Size Φ30mm Adaptive Element Thickness 3 - 10mm MHI-30-UU
MHI-30-UU
1piece
JPY: 13,800
USD: 85.86
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
Features
- Kinematic mirror holder in which the mirror reflecting surface does not offset from the rod axis even if the mirror thickness changes.
- The mirror reflection side is fixed so that it stops at the mirror frame butt.
- When the rod is attached to this mirror holder, the center axis of the rod coincides with the reflecting surface of the element, so that the center of the mirror does not deviate from the optical axis even when it is placed at an angle of 45 degrees on the optical bench.
- Since the transmission beam can be taken out in one direction, it can also be used as a beamsplitter holder.
- The mirror frame is built into the holder's supporting parts, reducing the thickness of the holder.
- The Kinematic Mirror Holder (MHG) allows more space for adjustment operations.
- The mounting of the holder can be fixed with the M4 accessory lower head screw from above and the M6 rod from below.
- (MHI-12.7 can be fixed with M3 attached lower head screw from above and M4 rod from below.)
- By using the positioning hole (φ3H7) of the mirror holder and pinning it to the base, the orientation of the mirror holder can be fixed to the designed position.
- (Positioning hole of MHI‐12.7 is φ2H7)
- A gimbal type upward operation mirror (BSHL) is also available, in which the center of rotation of fine adjustment coincides with the center of the mirror.
- * MHI-12.7 is limited to tailgating ±1° and rotation ±2° even when using a low-head, small-head hexagon socket head socket head bolt.
- * When installing the mirror and fixing it with the low-head hexagon socket head bolt, the hexagon wrench may interfere with the mirror.
- * Turn the rotary/aori adjustment screw to retract the mirror and tighten the bolt.
- * When the mirror holder is fixed to the base with M4 low head hexagon socket head bolt, the clearance is ±1 mm.
SpecSpec class="init">
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
特徴
- Kinematic mirror holder in which the mirror reflecting surface does not offset from the rod axis even if the mirror thickness changes.
- The mirror reflection side is fixed so that it stops at the mirror frame butt.
- When the rod is attached to this mirror holder, the center axis of the rod coincides with the reflecting surface of the element, so that the center of the mirror does not deviate from the optical axis even when it is placed at an angle of 45 degrees on the optical bench.
- Since the transmission beam can be taken out in one direction, it can also be used as a beamsplitter holder.
- The mirror frame is built into the holder's supporting parts, reducing the thickness of the holder.
- The Kinematic Mirror Holder (MHG) allows more space for adjustment operations.
- The mounting of the holder can be fixed with the M4 accessory lower head screw from above and the M6 rod from below.
- (MHI-12.7 can be fixed with M3 attached lower head screw from above and M4 rod from below.)
- By using the positioning hole (φ3H7) of the mirror holder and pinning it to the base, the orientation of the mirror holder can be fixed to the designed position.
- (Positioning hole of MHI‐12.7 is φ2H7)
- A gimbal type upward operation mirror (BSHL) is also available, in which the center of rotation of fine adjustment coincides with the center of the mirror.
- * MHI-12.7 is limited to tailgating ±1° and rotation ±2° even when using a low-head, small-head hexagon socket head socket head bolt.
- * When installing the mirror and fixing it with the low-head hexagon socket head bolt, the hexagon wrench may interfere with the mirror.
- * Turn the rotary/aori adjustment screw to retract the mirror and tighten the bolt.
- * When the mirror holder is fixed to the base with M4 low head hexagon socket head bolt, the clearance is ±1 mm.
SpecSpec class="init">
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
特徴
- Kinematic mirror holder in which the mirror reflecting surface does not offset from the rod axis even if the mirror thickness changes.
- The mirror reflection side is fixed so that it stops at the mirror frame butt.
- When the rod is attached to this mirror holder, the center axis of the rod coincides with the reflecting surface of the element, so that the center of the mirror does not deviate from the optical axis even when it is placed at an angle of 45 degrees on the optical bench.
- Since the transmission beam can be taken out in one direction, it can also be used as a beamsplitter holder.
- The mirror frame is built into the holder's supporting parts, reducing the thickness of the holder.
- The Kinematic Mirror Holder (MHG) allows more space for adjustment operations.
- The mounting of the holder can be fixed with the M4 accessory lower head screw from above and the M6 rod from below.
- (MHI-12.7 can be fixed with M3 attached lower head screw from above and M4 rod from below.)
- By using the positioning hole (φ3H7) of the mirror holder and pinning it to the base, the orientation of the mirror holder can be fixed to the designed position.
- (Positioning hole of MHI‐12.7 is φ2H7)
- A gimbal type upward operation mirror (BSHL) is also available, in which the center of rotation of fine adjustment coincides with the center of the mirror.
- * MHI-12.7 is limited to tailgating ±1° and rotation ±2° even when using a low-head, small-head hexagon socket head socket head bolt.
- * When installing the mirror and fixing it with the low-head hexagon socket head bolt, the hexagon wrench may interfere with the mirror.
- * Turn the rotary/aori adjustment screw to retract the mirror and tighten the bolt.
- * When the mirror holder is fixed to the base with M4 low head hexagon socket head bolt, the clearance is ±1 mm.
仕様
- [
common specification]
- Main material: Aluminum (brass only for MHI-12.7)
- Surface treatment: Black anodic oxide (super black chrome only for MHI-12.7)
- [Individual specification]
- Compatible optics size: φ25.4mm, φ25mm
- Compatible optics thickness: 3 - 10mm
- Effective diameter: φ23mm
- 45 degrees incidence reflective beam diameter: φ15.5mm
- 45 degrees incident transmittance hole diameter: φ13mm *When light is transmitted through a BK7 plane parallel substrate of 3mm thickness
- Adjustment range, tilt: ±1.5°
- Adjustment range, rotation: ±1.5°
- Resolution, tilt: Approximately 0.4°/rotation
- Resolution, rotation: Approximately 0.4°/rotation
- Mass: 0.12kg
- RoHS conform product
-
Order No.
61-6997-35
型番
MHI-25.4-UU
標準価格
JPY: 13,800
USD: 85.86
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
61-6997-32
Kinematic Center Mirror Mount Adaptive Element Size Φ12.7mm Compatible Optics Thickness 2 - 9mm MHI-12.7
MHI-12.7
1piece
JPY: 13,800
USD: 85.86
61-6997-33
Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4
MHI-25.4
1piece
JPY: 13,800
USD: 85.86
61-6997-34
Kinematic Center Mirror Mount Adaptive Element Size Φ30mm Adaptive Element Thickness 3 - 10mm MHI-30
MHI-30
1piece
JPY: 13,800
USD: 85.86
61-6997-35
Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
MHI-25.4-UU
1piece
JPY: 13,800
USD: 85.86
61-6997-36
Kinematic Center Mirror Mount Adaptive Element Size Φ30mm Adaptive Element Thickness 3 - 10mm MHI-30-UU
MHI-30-UU
1piece
JPY: 13,800
USD: 85.86
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
特徴
- Kinematic mirror holder in which the mirror reflecting surface does not offset from the rod axis even if the mirror thickness changes.
- The mirror reflection side is fixed so that it stops at the mirror frame butt.
- When the rod is attached to this mirror holder, the center axis of the rod coincides with the reflecting surface of the element, so that the center of the mirror does not deviate from the optical axis even when it is placed at an angle of 45 degrees on the optical bench.
- Since the transmission beam can be taken out in one direction, it can also be used as a beamsplitter holder.
- The mirror frame is built into the holder's supporting parts, reducing the thickness of the holder.
- The Kinematic Mirror Holder (MHG) allows more space for adjustment operations.
- The mounting of the holder can be fixed with the M4 accessory lower head screw from above and the M6 rod from below.
- (MHI-12.7 can be fixed with M3 attached lower head screw from above and M4 rod from below.)
- By using the positioning hole (φ3H7) of the mirror holder and pinning it to the base, the orientation of the mirror holder can be fixed to the designed position.
- (Positioning hole of MHI‐12.7 is φ2H7)
- A gimbal type upward operation mirror (BSHL) is also available, in which the center of rotation of fine adjustment coincides with the center of the mirror.
- * MHI-12.7 is limited to tailgating ±1° and rotation ±2° even when using a low-head, small-head hexagon socket head socket head bolt.
- * When installing the mirror and fixing it with the low-head hexagon socket head bolt, the hexagon wrench may interfere with the mirror.
- * Turn the rotary/aori adjustment screw to retract the mirror and tighten the bolt.
- * When the mirror holder is fixed to the base with M4 low head hexagon socket head bolt, the clearance is ±1 mm.
SpecSpec class="init">
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
特徴
- Kinematic mirror holder in which the mirror reflecting surface does not offset from the rod axis even if the mirror thickness changes.
- The mirror reflection side is fixed so that it stops at the mirror frame butt.
- When the rod is attached to this mirror holder, the center axis of the rod coincides with the reflecting surface of the element, so that the center of the mirror does not deviate from the optical axis even when it is placed at an angle of 45 degrees on the optical bench.
- Since the transmission beam can be taken out in one direction, it can also be used as a beamsplitter holder.
- The mirror frame is built into the holder's supporting parts, reducing the thickness of the holder.
- The Kinematic Mirror Holder (MHG) allows more space for adjustment operations.
- The mounting of the holder can be fixed with the M4 accessory lower head screw from above and the M6 rod from below.
- (MHI-12.7 can be fixed with M3 attached lower head screw from above and M4 rod from below.)
- By using the positioning hole (φ3H7) of the mirror holder and pinning it to the base, the orientation of the mirror holder can be fixed to the designed position.
- (Positioning hole of MHI‐12.7 is φ2H7)
- A gimbal type upward operation mirror (BSHL) is also available, in which the center of rotation of fine adjustment coincides with the center of the mirror.
- * MHI-12.7 is limited to tailgating ±1° and rotation ±2° even when using a low-head, small-head hexagon socket head socket head bolt.
- * When installing the mirror and fixing it with the low-head hexagon socket head bolt, the hexagon wrench may interfere with the mirror.
- * Turn the rotary/aori adjustment screw to retract the mirror and tighten the bolt.
- * When the mirror holder is fixed to the base with M4 low head hexagon socket head bolt, the clearance is ±1 mm.
仕様
- [
common specification]
- Main material: Aluminum (brass only for MHI-12.7)
- Surface treatment: Black anodic oxide (super black chrome only for MHI-12.7)
- [Individual specification]
- Compatible optics size: φ25.4mm, φ25mm
- Compatible optics thickness: 3 - 10mm
- Effective diameter: φ23mm
- 45 degrees incidence reflective beam diameter: φ15.5mm
- 45 degrees incident transmittance hole diameter: φ13mm *When light is transmitted through a BK7 plane parallel substrate of 3mm thickness
- Adjustment range, tilt: ±1.5°
- Adjustment range, rotation: ±1.5°
- Resolution, tilt: Approximately 0.4°/rotation
- Resolution, rotation: Approximately 0.4°/rotation
- Mass: 0.12kg
- RoHS conform product
-
Order No.
61-6997-35
型番
MHI-25.4-UU
標準価格
JPY: 13,800
USD: 85.86
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
61-6997-32
Kinematic Center Mirror Mount Adaptive Element Size Φ12.7mm Compatible Optics Thickness 2 - 9mm MHI-12.7
MHI-12.7
1piece
JPY: 13,800
USD: 85.86
61-6997-33
Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4
MHI-25.4
1piece
JPY: 13,800
USD: 85.86
61-6997-34
Kinematic Center Mirror Mount Adaptive Element Size Φ30mm Adaptive Element Thickness 3 - 10mm MHI-30
MHI-30
1piece
JPY: 13,800
USD: 85.86
61-6997-35
Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
MHI-25.4-UU
1piece
JPY: 13,800
USD: 85.86
61-6997-36
Kinematic Center Mirror Mount Adaptive Element Size Φ30mm Adaptive Element Thickness 3 - 10mm MHI-30-UU
MHI-30-UU
1piece
JPY: 13,800
USD: 85.86
61-6997-35 Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU
特徴
- Kinematic mirror holder in which the mirror reflecting surface does not offset from the rod axis even if the mirror thickness changes.
- The mirror reflection side is fixed so that it stops at the mirror frame butt.
- When the rod is attached to this mirror holder, the center axis of the rod coincides with the reflecting surface of the element, so that the center of the mirror does not deviate from the optical axis even when it is placed at an angle of 45 degrees on the optical bench.
- Since the transmission beam can be taken out in one direction, it can also be used as a beamsplitter holder.
- The mirror frame is built into the holder's supporting parts, reducing the thickness of the holder.
- The Kinematic Mirror Holder (MHG) allows more space for adjustment operations.
- The mounting of the holder can be fixed with the M4 accessory lower head screw from above and the M6 rod from below.
- (MHI-12.7 can be fixed with M3 attached lower head screw from above and M4 rod from below.)
- By using the positioning hole (φ3H7) of the mirror holder and pinning it to the base, the orientation of the mirror holder can be fixed to the designed position.
- (Positioning hole of MHI‐12.7 is φ2H7)
- A gimbal type upward operation mirror (BSHL) is also available, in which the center of rotation of fine adjustment coincides with the center of the mirror.
- * MHI-12.7 is limited to tailgating ±1° and rotation ±2° even when using a low-head, small-head hexagon socket head socket head bolt.
- * When installing the mirror and fixing it with the low-head hexagon socket head bolt, the hexagon wrench may interfere with the mirror.
- * Turn the rotary/aori adjustment screw to retract the mirror and tighten the bolt.
- * When the mirror holder is fixed to the base with M4 low head hexagon socket head bolt, the clearance is ±1 mm.
仕様
- [
common specification] - Main material: Aluminum (brass only for MHI-12.7)
- Surface treatment: Black anodic oxide (super black chrome only for MHI-12.7)
- [Individual specification]
- Compatible optics size: φ25.4mm, φ25mm
- Compatible optics thickness: 3 - 10mm
- Effective diameter: φ23mm
- 45 degrees incidence reflective beam diameter: φ15.5mm
- 45 degrees incident transmittance hole diameter: φ13mm *When light is transmitted through a BK7 plane parallel substrate of 3mm thickness
- Adjustment range, tilt: ±1.5°
- Adjustment range, rotation: ±1.5°
- Resolution, tilt: Approximately 0.4°/rotation
- Resolution, rotation: Approximately 0.4°/rotation
- Mass: 0.12kg
- RoHS conform product
| Order No. | 61-6997-35 | |
|---|---|---|
| 型番 | MHI-25.4-UU | |
| 標準価格 |
JPY: 13,800
USD: 85.86
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
|
61-6997-32 | Kinematic Center Mirror Mount Adaptive Element Size Φ12.7mm Compatible Optics Thickness 2 - 9mm MHI-12.7 | MHI-12.7 | 1piece | JPY: 13,800 | USD: 85.86 |
|
|
|
61-6997-33 | Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4 | MHI-25.4 | 1piece | JPY: 13,800 | USD: 85.86 |
|
|
|
61-6997-34 | Kinematic Center Mirror Mount Adaptive Element Size Φ30mm Adaptive Element Thickness 3 - 10mm MHI-30 | MHI-30 | 1piece | JPY: 13,800 | USD: 85.86 |
|
|
|
61-6997-35 | Kinematic Center Mirror Mount Adaptive Element Size Φ25.4mm, Φ25mm Adaptive Element Thickness 3 - 10mm MHI-25.4-UU | MHI-25.4-UU | 1piece | JPY: 13,800 | USD: 85.86 |
|
|
|
61-6997-36 | Kinematic Center Mirror Mount Adaptive Element Size Φ30mm Adaptive Element Thickness 3 - 10mm MHI-30-UU | MHI-30-UU | 1piece | JPY: 13,800 | USD: 85.86 |
|