AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6993-77　Prism Holder Adaptive Element Size To Φ10mm　PLH-25-N

Features

  • Holders for fixing block-shaped optical elements such as cube beam splitters and rectangular prisms.
  • By installing the cube prism so that the supports of the prism presser are diagonal, all four sides of the prism can be used.
  • The KKD type has a two-direction tilt and rotation adjustment mechanism, allowing fine adjustment of the reflected beam.
  • As long as the device size is within the specified range, any size can be fixed.
  • Since the knob of the prism presser mechanism and the presser are independent, the prism does not rotate together even if the knob is turned.
  • A θαβ shaft compact thin stage (KKD-C) with prism presser and strut removed is also available.
  • * KKD-25PH and PLH-25 do not apply pressure when pressing the prism, and there is a risk of the element falling off.
  • * Make sure that the prism is fixed before use.
  • * For the KKD type, if the prism presser is lifted after adjustment, the prism table may move and the adjustment of inclination and rotation may be misaligned.
  • * Do not touch the prism presser after adjustment.

Spec

  • [ common specification]
  • Major material: Aluminum
  • Surface treatment: Black anodic oxide
  • [Individual specification]
  • Compatible optics size: - □10mm
  • Adjustment range (rotation): ?
  • Adjustment range (tilt): ?
  • Resolution (rotation): ?
  • Resolution (tilt): ?
  • Mass: 0.08kg
  • RoHS conform product
  •  
Order No.Order No.ss="init"> 61-6993-77 Prism Holder Adaptive Element Size To Φ10mm　PLH-25-N 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6993-77　Prism Holder Adaptive Element Size To Φ10mm　PLH-25-N

特徴

  • Holders for fixing block-shaped optical elements such as cube beam splitters and rectangular prisms.
  • By installing the cube prism so that the supports of the prism presser are diagonal, all four sides of the prism can be used.
  • The KKD type has a two-direction tilt and rotation adjustment mechanism, allowing fine adjustment of the reflected beam.
  • As long as the device size is within the specified range, any size can be fixed.
  • Since the knob of the prism presser mechanism and the presser are independent, the prism does not rotate together even if the knob is turned.
  • A θαβ shaft compact thin stage (KKD-C) with prism presser and strut removed is also available.
  • * KKD-25PH and PLH-25 do not apply pressure when pressing the prism, and there is a risk of the element falling off.
  • * Make sure that the prism is fixed before use.
  • * For the KKD type, if the prism presser is lifted after adjustment, the prism table may move and the adjustment of inclination and rotation may be misaligned.
  • * Do not touch the prism presser after adjustment.

仕様

  • [ common specification]
  • Major material: Aluminum
  • Surface treatment: Black anodic oxide
  • [Individual specification]
  • Compatible optics size: - □10mm
  • Adjustment range (rotation): ?
  • Adjustment range (tilt): ?
  • Resolution (rotation): ?
  • Resolution (tilt): ?
  • Mass: 0.08kg
  • RoHS conform product
  •  
アズワン品番 61-6993-77
Model No. PLH-25-N
Standard price JPY: 9,400 USD: 58.92
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
サプライヤ在庫

商品のバリエーション （サイズ違い・スペック違い・オプション品など）

商品イメージ アズワン品番 商品名 型番 QuantityQuantityass="init"> 61-6993-77 Prism Holder Adaptive Element Size To Φ10mm　PLH-25-N 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6993-77　Prism Holder Adaptive Element Size To Φ10mm　PLH-25-N

特徴

  • Holders for fixing block-shaped optical elements such as cube beam splitters and rectangular prisms.
  • By installing the cube prism so that the supports of the prism presser are diagonal, all four sides of the prism can be used.
  • The KKD type has a two-direction tilt and rotation adjustment mechanism, allowing fine adjustment of the reflected beam.
  • As long as the device size is within the specified range, any size can be fixed.
  • Since the knob of the prism presser mechanism and the presser are independent, the prism does not rotate together even if the knob is turned.
  • A θαβ shaft compact thin stage (KKD-C) with prism presser and strut removed is also available.
  • * KKD-25PH and PLH-25 do not apply pressure when pressing the prism, and there is a risk of the element falling off.
  • * Make sure that the prism is fixed before use.
  • * For the KKD type, if the prism presser is lifted after adjustment, the prism table may move and the adjustment of inclination and rotation may be misaligned.
  • * Do not touch the prism presser after adjustment.

仕様

  • [ common specification]
  • Major material: Aluminum
  • Surface treatment: Black anodic oxide
  • [Individual specification]
  • Compatible optics size: - □10mm
  • Adjustment range (rotation): ?
  • Adjustment range (tilt): ?
  • Resolution (rotation): ?
  • Resolution (tilt): ?
  • Mass: 0.08kg
  • RoHS conform product
  •  
アズワン品番 61-6993-77
型番 PLH-25-N
標準価格 JPY: 9,400 USD: 58.92
Excange rate 1USD= 159.53JPY
Valid price in Japan
QuantityASONEs="init"> 61-6993-77 Prism Holder Adaptive Element Size To Φ10mm　PLH-25-N 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6993-77　Prism Holder Adaptive Element Size To Φ10mm　PLH-25-N

Features

  • Holders for fixing block-shaped optical elements such as cube beam splitters and rectangular prisms.
  • By installing the cube prism so that the supports of the prism presser are diagonal, all four sides of the prism can be used.
  • The KKD type has a two-direction tilt and rotation adjustment mechanism, allowing fine adjustment of the reflected beam.
  • As long as the device size is within the specified range, any size can be fixed.
  • Since the knob of the prism presser mechanism and the presser are independent, the prism does not rotate together even if the knob is turned.
  • A θαβ shaft compact thin stage (KKD-C) with prism presser and strut removed is also available.
  • * KKD-25PH and PLH-25 do not apply pressure when pressing the prism, and there is a risk of the element falling off.
  • * Make sure that the prism is fixed before use.
  • * For the KKD type, if the prism presser is lifted after adjustment, the prism table may move and the adjustment of inclination and rotation may be misaligned.
  • * Do not touch the prism presser after adjustment.

Spec

  • [ common specification]
  • Major material: Aluminum
  • Surface treatment: Black anodic oxide
  • [Individual specification]
  • Compatible optics size: - □10mm
  • Adjustment range (rotation): ?
  • Adjustment range (tilt): ?
  • Resolution (rotation): ?
  • Resolution (tilt): ?
  • Mass: 0.08kg
  • RoHS conform product
  •  
Order No. 61-6993-77
Model No. PLH-25-N
Standard price JPY: 9,400 USD: 58.92
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
61-6993-68 Prism Holder Adaptive Element Size To Φ10mm　KKD-25PH KKD-25PH 1piece JPY: 27,800 USD: 174.26

61-6993-69 Prism Holder Adaptive Element Size To Φ10mm　KKD-25PHRO KKD-25PHRO 1piece JPY: 28,800 USD: 180.53

61-6993-70 Prism Holder Adaptive Element Size Φ5- Φ26mm　KKD-40PH KKD-40PH 1piece JPY: 32,300 USD: 202.47

61-6993-71 Prism Holder Adaptive Element Size Φ5- Φ26mm　KKD-40PHRO KKD-40PHRO 1piece JPY: 33,300 USD: 208.74

61-6993-72 Prism Holder Adaptive Element Size Φ10 - Φ32mm　KKD-60PH KKD-60PH 1piece JPY: 39,500 USD: 247.60

61-6993-73 Prism Holder Adaptive Element Size Φ10 - Φ32mm　KKD-60PHRO KKD-60PHRO 1piece JPY: 40,500 USD: 253.87

61-6993-74 Prism Holder Adaptive Element Size To Φ10mm　PLH-25 PLH-25 1piece JPY: 10,400 USD: 65.19

61-6993-75 Prism Holder Adaptive Element Size Φ5- Φ26mm　PLH-40 PLH-40 1piece JPY: 12,500 USD: 78.36

61-6993-76 Prism Holder Adaptive Element Size Φ10 - Φ32mm　PLH-60 PLH-60 1piece JPY: 16,600 USD: 104.06

61-6993-77 Prism Holder Adaptive Element Size To Φ10mm　PLH-25-N PLH-25-N 1piece JPY: 9,400 USD: 58.92

61-6993-78 Prism Holder Adaptive Element Size Φ5- Φ26mm　PLH-40-N PLH-40-N 1piece JPY: 11,500 USD: 72.09

61-6993-79 Prism Holder Adaptive Element Size Φ10 - Φ32mm　PLH-60-N PLH-60-N 1piece JPY: 15,600 USD: 97.79

This page is the page of Prism Holder Adaptive Element Size To Φ10mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.