61-6991-07 ［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
FeaturesFeatures class="init">
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE 61-6991-07 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6991-07 ［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
特徴
- By cantilevering the gimbal rotation mechanism of the mirror holder, it is possible to use two mirror holders in close proximity.
- The two types of mirror holders, R-type and L-type, with mirror symmetry can be used in pairs to align the direction of operation in the same direction.
- There is a standard type (MHE-M) that can rotate and tailgate the mirror with a micrometer, and a precision type (MHE-DM) that uses a differential micrometer head.
- The optical element can be clamped with three claws and three resin nuts to secure even thick elements.
- The reflective surface in contact with the nail coincides with the center of rotation of the holder.
- There is also a gimbal type upper operation mirror holder (LMHA) that can be adjusted from the upper side.
- * If the beam splitter or the like is placed at an incident angle of 45 degrees, the micrometer or screws may block the beam.
- * Use a gimbal beam splitter holder (BHAN) to increase the effective diameter of transmitted and reflected light.
- * When inserting an optical element, you must loosen the three resin nuts to the end of the screw to insert the element.
- * In the case of a thick device, remove only one part of the resin nut completely and insert it.
SpecSpec class="init">
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE 61-6991-07 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6991-07 ［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
特徴
- By cantilevering the gimbal rotation mechanism of the mirror holder, it is possible to use two mirror holders in close proximity.
- The two types of mirror holders, R-type and L-type, with mirror symmetry can be used in pairs to align the direction of operation in the same direction.
- There is a standard type (MHE-M) that can rotate and tailgate the mirror with a micrometer, and a precision type (MHE-DM) that uses a differential micrometer head.
- The optical element can be clamped with three claws and three resin nuts to secure even thick elements.
- The reflective surface in contact with the nail coincides with the center of rotation of the holder.
- There is also a gimbal type upper operation mirror holder (LMHA) that can be adjusted from the upper side.
- * If the beam splitter or the like is placed at an incident angle of 45 degrees, the micrometer or screws may block the beam.
- * Use a gimbal beam splitter holder (BHAN) to increase the effective diameter of transmitted and reflected light.
- * When inserting an optical element, you must loosen the three resin nuts to the end of the screw to insert the element.
- * In the case of a thick device, remove only one part of the resin nut completely and insert it.
仕様
- [
common specification]
- Main material: Aluminum
- Surface treatment: Black anodic oxide
- [Individual specification]
- Compatible optics size: φ25.4mm
- Compatible optics thickness: 1 - 10mm
- Adjustment range, tilt: ±8°
- Adjustment range, rotation: ±5.5°
- Resolution, tilt: ?
- Resolution, rotation: ?
- Micro display conversion, tilt: ?
- Micro display conversion, rotation: ?
- Coarse resolution, tilt: Approximately 1.4°/rotation
- Coarse resolution, rotation: Approximately 1.4°/rotation
- Fine resolution, tilt: Approximately 0.14°/rotation
- Fine resolution, rotation: Approximately 0.14°/rotation
- Small adjustment screw display conversion, tilt: Approximately 0.003°/DIV
- Small adjustment screw display conversion, rotation: Approximately 0.003°/DIV
- Mass: 0.28kg
- RoHS conform product
-
Order No.
61-6991-07
Model No.
MHE-25.4DML-EE
Standard price
JPY: 48,500
USD: 304.02
Excange rate 1USD= 159.53JPY
Valid price in Japan
QuantityStandard pricess="init">
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE 61-6991-07 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6991-07 ［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
特徴
- By cantilevering the gimbal rotation mechanism of the mirror holder, it is possible to use two mirror holders in close proximity.
- The two types of mirror holders, R-type and L-type, with mirror symmetry can be used in pairs to align the direction of operation in the same direction.
- There is a standard type (MHE-M) that can rotate and tailgate the mirror with a micrometer, and a precision type (MHE-DM) that uses a differential micrometer head.
- The optical element can be clamped with three claws and three resin nuts to secure even thick elements.
- The reflective surface in contact with the nail coincides with the center of rotation of the holder.
- There is also a gimbal type upper operation mirror holder (LMHA) that can be adjusted from the upper side.
- * If the beam splitter or the like is placed at an incident angle of 45 degrees, the micrometer or screws may block the beam.
- * Use a gimbal beam splitter holder (BHAN) to increase the effective diameter of transmitted and reflected light.
- * When inserting an optical element, you must loosen the three resin nuts to the end of the screw to insert the element.
- * In the case of a thick device, remove only one part of the resin nut completely and insert it.
仕様
- [
common specification]
- Main material: Aluminum
- Surface treatment: Black anodic oxide
- [Individual specification]
- Compatible optics size: φ25.4mm
- Compatible optics thickness: 1 - 10mm
- Adjustment range, tilt: ±8°
- Adjustment range, rotation: ±5.5°
- Resolution, tilt: ?
- Resolution, rotation: ?
- Micro display conversion, tilt: ?
- Micro display conversion, rotation: ?
- Coarse resolution, tilt: Approximately 1.4°/rotation
- Coarse resolution, rotation: Approximately 1.4°/rotation
- Fine resolution, tilt: Approximately 0.14°/rotation
- Fine resolution, rotation: Approximately 0.14°/rotation
- Small adjustment screw display conversion, tilt: Approximately 0.003°/DIV
- Small adjustment screw display conversion, rotation: Approximately 0.003°/DIV
- Mass: 0.28kg
- RoHS conform product
-
アズワン品番
61-6991-07
型番
MHE-25.4DML-EE
標準価格
JPY: 48,500
USD: 304.02
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
-
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6990-95
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4MR
MHE-25.4MR
1piece
JPY: 36,900
USD: 231.30
-
61-6990-96
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4ML
MHE-25.4ML
1piece
JPY: 36,900
USD: 231.30
-
61-6990-97
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DMR
MHE-25.4DMR
1piece
JPY: 49,500
USD: 310.29
-
61-6990-98
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML
MHE-25.4DML
1piece
JPY: 49,500
USD: 310.29
-
61-6990-99
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30MR
MHE-30MR
1piece
JPY: 36,900
USD: 231.30
-
61-6991-01
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30ML
MHE-30ML
1piece
JPY: 36,900
USD: 231.30
-
61-6991-02
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DMR
MHE-30DMR
1piece
JPY: 49,500
USD: 310.29
-
61-6991-03
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DML
MHE-30DML
1piece
JPY: 49,500
USD: 310.29
-
61-6991-04
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4MR-EE
MHE-25.4MR-EE
1piece
JPY: 35,900
USD: 225.04
-
61-6991-05
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4ML-EE
MHE-25.4ML-EE
1piece
JPY: 35,900
USD: 225.04
-
61-6991-06
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DMR-EE
MHE-25.4DMR-EE
1piece
JPY: 48,500
USD: 304.02
-
61-6991-07
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
MHE-25.4DML-EE
1piece
JPY: 48,500
USD: 304.02
-
61-6991-08
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30MR-EE
MHE-30MR-EE
1piece
JPY: 35,900
USD: 225.04
-
61-6991-09
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30ML-EE
MHE-30ML-EE
1piece
JPY: 35,900
USD: 225.04
-
61-6991-10
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DMR-EE
MHE-30DMR-EE
1piece
JPY: 48,500
USD: 304.02
-
61-6991-11
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DML-EE
MHE-30DML-EE
1piece
JPY: 48,500
USD: 304.02
-
61-6991-12
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4MR-UU
MHE-25.4MR-UU
1piece
JPY: 35,900
USD: 225.04
-
61-6991-13
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4ML-UU
MHE-25.4ML-UU
1piece
JPY: 35,900
USD: 225.04
-
61-6991-14
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DMR-UU
MHE-25.4DMR-UU
1piece
JPY: 48,500
USD: 304.02
-
61-6991-15
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-UU
MHE-25.4DML-UU
1piece
JPY: 48,500
USD: 304.02
-
61-6991-16
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30MR-UU
MHE-30MR-UU
1piece
JPY: 35,900
USD: 225.04
-
61-6991-17
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30ML-UU
MHE-30ML-UU
1piece
JPY: 35,900
USD: 225.04
-
61-6991-18
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DMR-UU
MHE-30DMR-UU
1piece
JPY: 48,500
USD: 304.02
-
61-6991-19
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DML-UU
MHE-30DML-UU
1piece
JPY: 48,500
USD: 304.02
-
61-6991-07 ［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
特徴
- By cantilevering the gimbal rotation mechanism of the mirror holder, it is possible to use two mirror holders in close proximity.
- The two types of mirror holders, R-type and L-type, with mirror symmetry can be used in pairs to align the direction of operation in the same direction.
- There is a standard type (MHE-M) that can rotate and tailgate the mirror with a micrometer, and a precision type (MHE-DM) that uses a differential micrometer head.
- The optical element can be clamped with three claws and three resin nuts to secure even thick elements.
- The reflective surface in contact with the nail coincides with the center of rotation of the holder.
- There is also a gimbal type upper operation mirror holder (LMHA) that can be adjusted from the upper side.
- * If the beam splitter or the like is placed at an incident angle of 45 degrees, the micrometer or screws may block the beam.
- * Use a gimbal beam splitter holder (BHAN) to increase the effective diameter of transmitted and reflected light.
- * When inserting an optical element, you must loosen the three resin nuts to the end of the screw to insert the element.
- * In the case of a thick device, remove only one part of the resin nut completely and insert it.
SpecSpec class="init">
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE 61-6991-07 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6991-07 ［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
特徴
- By cantilevering the gimbal rotation mechanism of the mirror holder, it is possible to use two mirror holders in close proximity.
- The two types of mirror holders, R-type and L-type, with mirror symmetry can be used in pairs to align the direction of operation in the same direction.
- There is a standard type (MHE-M) that can rotate and tailgate the mirror with a micrometer, and a precision type (MHE-DM) that uses a differential micrometer head.
- The optical element can be clamped with three claws and three resin nuts to secure even thick elements.
- The reflective surface in contact with the nail coincides with the center of rotation of the holder.
- There is also a gimbal type upper operation mirror holder (LMHA) that can be adjusted from the upper side.
- * If the beam splitter or the like is placed at an incident angle of 45 degrees, the micrometer or screws may block the beam.
- * Use a gimbal beam splitter holder (BHAN) to increase the effective diameter of transmitted and reflected light.
- * When inserting an optical element, you must loosen the three resin nuts to the end of the screw to insert the element.
- * In the case of a thick device, remove only one part of the resin nut completely and insert it.
仕様
- [
common specification]
- Main material: Aluminum
- Surface treatment: Black anodic oxide
- [Individual specification]
- Compatible optics size: φ25.4mm
- Compatible optics thickness: 1 - 10mm
- Adjustment range, tilt: ±8°
- Adjustment range, rotation: ±5.5°
- Resolution, tilt: ?
- Resolution, rotation: ?
- Micro display conversion, tilt: ?
- Micro display conversion, rotation: ?
- Coarse resolution, tilt: Approximately 1.4°/rotation
- Coarse resolution, rotation: Approximately 1.4°/rotation
- Fine resolution, tilt: Approximately 0.14°/rotation
- Fine resolution, rotation: Approximately 0.14°/rotation
- Small adjustment screw display conversion, tilt: Approximately 0.003°/DIV
- Small adjustment screw display conversion, rotation: Approximately 0.003°/DIV
- Mass: 0.28kg
- RoHS conform product
-
Order No.
61-6991-07
Model No.
MHE-25.4DML-EE
Standard price
JPY: 48,500
USD: 304.02
Excange rate 1USD= 159.53JPY
Valid price in Japan
QuantityStandard pricess="init">
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE 61-6991-07 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6991-07 ［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
特徴
- By cantilevering the gimbal rotation mechanism of the mirror holder, it is possible to use two mirror holders in close proximity.
- The two types of mirror holders, R-type and L-type, with mirror symmetry can be used in pairs to align the direction of operation in the same direction.
- There is a standard type (MHE-M) that can rotate and tailgate the mirror with a micrometer, and a precision type (MHE-DM) that uses a differential micrometer head.
- The optical element can be clamped with three claws and three resin nuts to secure even thick elements.
- The reflective surface in contact with the nail coincides with the center of rotation of the holder.
- There is also a gimbal type upper operation mirror holder (LMHA) that can be adjusted from the upper side.
- * If the beam splitter or the like is placed at an incident angle of 45 degrees, the micrometer or screws may block the beam.
- * Use a gimbal beam splitter holder (BHAN) to increase the effective diameter of transmitted and reflected light.
- * When inserting an optical element, you must loosen the three resin nuts to the end of the screw to insert the element.
- * In the case of a thick device, remove only one part of the resin nut completely and insert it.
仕様
- [
common specification]
- Main material: Aluminum
- Surface treatment: Black anodic oxide
- [Individual specification]
- Compatible optics size: φ25.4mm
- Compatible optics thickness: 1 - 10mm
- Adjustment range, tilt: ±8°
- Adjustment range, rotation: ±5.5°
- Resolution, tilt: ?
- Resolution, rotation: ?
- Micro display conversion, tilt: ?
- Micro display conversion, rotation: ?
- Coarse resolution, tilt: Approximately 1.4°/rotation
- Coarse resolution, rotation: Approximately 1.4°/rotation
- Fine resolution, tilt: Approximately 0.14°/rotation
- Fine resolution, rotation: Approximately 0.14°/rotation
- Small adjustment screw display conversion, tilt: Approximately 0.003°/DIV
- Small adjustment screw display conversion, rotation: Approximately 0.003°/DIV
- Mass: 0.28kg
- RoHS conform product
-
アズワン品番
61-6991-07
型番
MHE-25.4DML-EE
標準価格
JPY: 48,500
USD: 304.02
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
-
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6990-95
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4MR
MHE-25.4MR
1piece
JPY: 36,900
USD: 231.30
-
61-6990-96
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4ML
MHE-25.4ML
1piece
JPY: 36,900
USD: 231.30
-
61-6990-97
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DMR
MHE-25.4DMR
1piece
JPY: 49,500
USD: 310.29
-
61-6990-98
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML
MHE-25.4DML
1piece
JPY: 49,500
USD: 310.29
-
61-6990-99
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30MR
MHE-30MR
1piece
JPY: 36,900
USD: 231.30
-
61-6991-01
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30ML
MHE-30ML
1piece
JPY: 36,900
USD: 231.30
-
61-6991-02
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DMR
MHE-30DMR
1piece
JPY: 49,500
USD: 310.29
-
61-6991-03
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DML
MHE-30DML
1piece
JPY: 49,500
USD: 310.29
-
61-6991-04
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4MR-EE
MHE-25.4MR-EE
1piece
JPY: 35,900
USD: 225.04
-
61-6991-05
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4ML-EE
MHE-25.4ML-EE
1piece
JPY: 35,900
USD: 225.04
-
61-6991-06
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DMR-EE
MHE-25.4DMR-EE
1piece
JPY: 48,500
USD: 304.02
-
61-6991-07
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
MHE-25.4DML-EE
1piece
JPY: 48,500
USD: 304.02
-
61-6991-08
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30MR-EE
MHE-30MR-EE
1piece
JPY: 35,900
USD: 225.04
-
61-6991-09
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30ML-EE
MHE-30ML-EE
1piece
JPY: 35,900
USD: 225.04
-
61-6991-10
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DMR-EE
MHE-30DMR-EE
1piece
JPY: 48,500
USD: 304.02
-
61-6991-11
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DML-EE
MHE-30DML-EE
1piece
JPY: 48,500
USD: 304.02
-
61-6991-12
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4MR-UU
MHE-25.4MR-UU
1piece
JPY: 35,900
USD: 225.04
-
61-6991-13
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4ML-UU
MHE-25.4ML-UU
1piece
JPY: 35,900
USD: 225.04
-
61-6991-14
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DMR-UU
MHE-25.4DMR-UU
1piece
JPY: 48,500
USD: 304.02
-
61-6991-15
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-UU
MHE-25.4DML-UU
1piece
JPY: 48,500
USD: 304.02
-
61-6991-16
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30MR-UU
MHE-30MR-UU
1piece
JPY: 35,900
USD: 225.04
-
61-6991-17
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30ML-UU
MHE-30ML-UU
1piece
JPY: 35,900
USD: 225.04
-
61-6991-18
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DMR-UU
MHE-30DMR-UU
1piece
JPY: 48,500
USD: 304.02
-
61-6991-19
［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ30mm Adaptive Element Thickness 1 - 10mm MHE-30DML-UU
MHE-30DML-UU
1piece
JPY: 48,500
USD: 304.02
-
61-6991-07 ［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE
特徴
- By cantilevering the gimbal rotation mechanism of the mirror holder, it is possible to use two mirror holders in close proximity.
- The two types of mirror holders, R-type and L-type, with mirror symmetry can be used in pairs to align the direction of operation in the same direction.
- There is a standard type (MHE-M) that can rotate and tailgate the mirror with a micrometer, and a precision type (MHE-DM) that uses a differential micrometer head.
- The optical element can be clamped with three claws and three resin nuts to secure even thick elements.
- The reflective surface in contact with the nail coincides with the center of rotation of the holder.
- There is also a gimbal type upper operation mirror holder (LMHA) that can be adjusted from the upper side.
- * If the beam splitter or the like is placed at an incident angle of 45 degrees, the micrometer or screws may block the beam.
- * Use a gimbal beam splitter holder (BHAN) to increase the effective diameter of transmitted and reflected light.
- * When inserting an optical element, you must loosen the three resin nuts to the end of the screw to insert the element.
- * In the case of a thick device, remove only one part of the resin nut completely and insert it.
仕様
- [
common specification] - Main material: Aluminum
- Surface treatment: Black anodic oxide
- [Individual specification]
- Compatible optics size: φ25.4mm
- Compatible optics thickness: 1 - 10mm
- Adjustment range, tilt: ±8°
- Adjustment range, rotation: ±5.5°
- Resolution, tilt: ?
- Resolution, rotation: ?
- Micro display conversion, tilt: ?
- Micro display conversion, rotation: ?
- Coarse resolution, tilt: Approximately 1.4°/rotation
- Coarse resolution, rotation: Approximately 1.4°/rotation
- Fine resolution, tilt: Approximately 0.14°/rotation
- Fine resolution, rotation: Approximately 0.14°/rotation
- Small adjustment screw display conversion, tilt: Approximately 0.003°/DIV
- Small adjustment screw display conversion, rotation: Approximately 0.003°/DIV
- Mass: 0.28kg
- RoHS conform product
| Order No. | 61-6991-07 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model No. | MHE-25.4DML-EE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Standard price |
JPY: 48,500
USD: 304.02
Excange rate 1USD= 159.53JPY
Valid price in Japan |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
QuantityStandard pricess="init">
61-6991-07 ［Discontinued］Close Type Mirror Holder Adaptive Element Size Φ25.4mm Adaptive Element Thickness 1 - 10mm MHE-25.4DML-EE特徴
仕様
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||