AS ONE AS ONE

Listed products : 3 milion productsListed products : 3 milion products"init"> 61-6982-12 Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type　MDC-13 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6982-12　Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type　MDC-13

Features

  • This is an original product that is compatible with the installation part of the micrometer head used for the manual stage of the company.
  • Since the operation section can be consolidated in one direction, it is effective for work efficiency because it is easy to operate in places with built-in equipment or restrictions.
  • Compatible with product installation instructions using the micrometer head of the company (MDC-6.5⇔SHT1-6.5, MDC-13⇔SHS2-13).
  • After loosening the screws of the folded micrometer head, it is possible to rotate it and fix it at any position.
  • Depending on the situation, it can be used in the most convenient position.
  • There are R type and flat type tip shape.
  • Since the principle of leverage is applied, the feed amount relative to the scale of the micrometer head is 1:1 near the center, but the lateral deviation of the lever part occurs at the periphery, so use the scale as a guide.
  • * Depending on the type and direction of the stage on which the folding micrometer head is installed, the movement range may be narrowed or interference with the installation parts may occur.
  • * It is recommended to check in advance when replacing with a micrometer head.
  • * MDC-6.5/6.5R uses dedicated nuts.
  • * Nut turning MNS-12.5-14.5 cannot be used.
  • * If you install or tighten the MDC-13/13R by yourself, a special tool (MNS -12.5-14.5) is provided.

Spec

  • Movement amount: 0 - 13mm
  • Minimum reading: 0.01mm
  • Movement amount/1 rotation: 0.5mm
  • Allowable load (static load): 39.2N (4kgf)
  • Tip shape: Flat-type
  • Mass: 0.07kg
  • RoHS conform product
  •  
Order No. 61-6982-12
型番 MDC-13
標準価格 JPY: 20,700 USD: 129.76
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数 1piece
在庫数
サプライヤ在庫

商品のバリエーション （サイズ違い・スペック違い・オプション品など）

商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
[サプライヤ在庫]
61-6982-10 Folded Type Micrometer Head 0 - 6.5mm Tip Shape Flat Type　MDC-6.5 MDC-6.5 1piece JPY: 20,700 USD: 129.76

61-6982-11 Folded Type Micrometer Head 0 - 6.5mm Tip Shape R Type　MDC-6.5R MDC-6.5R 1piece JPY: 21,900 USD: 137.28

61-6982-12 Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type　MDC-13 MDC-13 1piece JPY: 20,700 USD: 129.76

61-6982-13 Folded Type Micrometer Head 0 - 13mm Tip Shape R Type　MDC-13R MDC-13R 1piece JPY: 21,900 USD: 137.28

This page is the page of Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.2 Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type　MDC-13 【AXEL GLOBAL】 アズワン

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6982-12　Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type　MDC-13

特徴

  • This is an original product that is compatible with the installation part of the micrometer head used for the manual stage of the company.
  • Since the operation section can be consolidated in one direction, it is effective for work efficiency because it is easy to operate in places with built-in equipment or restrictions.
  • Compatible with product installation instructions using the micrometer head of the company (MDC-6.5⇔SHT1-6.5, MDC-13⇔SHS2-13).
  • After loosening the screws of the folded micrometer head, it is possible to rotate it and fix it at any position.
  • Depending on the situation, it can be used in the most convenient position.
  • There are R type and flat type tip shape.
  • Since the principle of leverage is applied, the feed amount relative to the scale of the micrometer head is 1:1 near the center, but the lateral deviation of the lever part occurs at the periphery, so use the scale as a guide.
  • * Depending on the type and direction of the stage on which the folding micrometer head is installed, the movement range may be narrowed or interference with the installation parts may occur.
  • * It is recommended to check in advance when replacing with a micrometer head.
  • * MDC-6.5/6.5R uses dedicated nuts.
  • * Nut turning MNS-12.5-14.5 cannot be used.
  • * If you install or tighten the MDC-13/13R by yourself, a special tool (MNS -12.5-14.5) is provided.

仕様

  • Movement amount: 0 - 13mm
  • Minimum reading: 0.01mm
  • Movement amount/1 rotation: 0.5mm
  • Allowable load (static load): 39.2N (4kgf)
  • Tip shape: Flat-type
  • Mass: 0.07kg
  • RoHS conform product
  •  
アズワン品番 61-6982-12
型番 MDC-13
標準価格 JPY: 20,700 USD: 129.76
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数 1piece
在庫数
サプライヤ在庫

商品のバリエーション （サイズ違い・スペック違い・オプション品など）

商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
[サプライヤ在庫]
61-6982-10 Folded Type Micrometer Head 0 - 6.5mm Tip Shape Flat Type　MDC-6.5 MDC-6.5 1piece JPY: 20,700 USD: 129.76

61-6982-11 Folded Type Micrometer Head 0 - 6.5mm Tip Shape R Type　MDC-6.5R MDC-6.5R 1piece JPY: 21,900 USD: 137.28

61-6982-12 Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type　MDC-13 MDC-13 1piece JPY: 20,700 USD: 129.76

61-6982-13 Folded Type Micrometer Head 0 - 13mm Tip Shape R Type　MDC-13R MDC-13R 1piece JPY: 21,900 USD: 137.28

This page is the page of Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init"> 61-6982-12 Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type　MDC-13 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
SIGMAKOKI CO., LTD.

61-6982-12　Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type　MDC-13

Features

  • This is an original product that is compatible with the installation part of the micrometer head used for the manual stage of the company.
  • Since the operation section can be consolidated in one direction, it is effective for work efficiency because it is easy to operate in places with built-in equipment or restrictions.
  • Compatible with product installation instructions using the micrometer head of the company (MDC-6.5⇔SHT1-6.5, MDC-13⇔SHS2-13).
  • After loosening the screws of the folded micrometer head, it is possible to rotate it and fix it at any position.
  • Depending on the situation, it can be used in the most convenient position.
  • There are R type and flat type tip shape.
  • Since the principle of leverage is applied, the feed amount relative to the scale of the micrometer head is 1:1 near the center, but the lateral deviation of the lever part occurs at the periphery, so use the scale as a guide.
  • * Depending on the type and direction of the stage on which the folding micrometer head is installed, the movement range may be narrowed or interference with the installation parts may occur.
  • * It is recommended to check in advance when replacing with a micrometer head.
  • * MDC-6.5/6.5R uses dedicated nuts.
  • * Nut turning MNS-12.5-14.5 cannot be used.
  • * If you install or tighten the MDC-13/13R by yourself, a special tool (MNS -12.5-14.5) is provided.

Spec

  • Movement amount: 0 - 13mm
  • Minimum reading: 0.01mm
  • Movement amount/1 rotation: 0.5mm
  • Allowable load (static load): 39.2N (4kgf)
  • Tip shape: Flat-type
  • Mass: 0.07kg
  • RoHS conform product
  •  
Order No. 61-6982-12
Model No. MDC-13
Standard price JPY: 20,700 USD: 129.76
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
61-6982-10 Folded Type Micrometer Head 0 - 6.5mm Tip Shape Flat Type　MDC-6.5 MDC-6.5 1piece JPY: 20,700 USD: 129.76

61-6982-11 Folded Type Micrometer Head 0 - 6.5mm Tip Shape R Type　MDC-6.5R MDC-6.5R 1piece JPY: 21,900 USD: 137.28

61-6982-12 Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type　MDC-13 MDC-13 1piece JPY: 20,700 USD: 129.76

61-6982-13 Folded Type Micrometer Head 0 - 13mm Tip Shape R Type　MDC-13R MDC-13R 1piece JPY: 21,900 USD: 137.28

This page is the page of Folded Type Micrometer Head 0 - 13mm Tip Shape Flat Type sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.