61-6977-77 Θ Axis Coarse/Fine Stage Size Φ60mm KSP-786FP
Features
- It is a grinding type θ axis (rotation) coarse motion stage that can rotate 360° of coarse motion and fine motion (selection from micrometer head or fine pitch screw).
- For rough movement, the upper surface of the stage is directly rotated, and for fine movement, the rough part is clamped and performed with a micrometer head or fine pitch screw (±5°).
- The KSP uses shinchu for the stage body to provide high rigidity.
- (Only KSP-786M**, Main material: aluminum, Surface treatment: black anodized.)
- The through hole in the center of the stage can be used for the through hole.
- Can be attached to various stages by converting the mounting holes using the KSP/KSPA top spacer SP-103.
- It can be attached to a magnet base or □ 60 mm stage (M4 50 x 50) by converting the mounting hole using the KSP-786M dedicated lower spacer SP-104.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
Spec
- Table surface size: φ60mm
- Rotation range: Coarse 360 ° fine ± 5°
- Scale minimum reading: 5′
- Micrometer minimum reading: ?
- Movement guide: Lapping method
- Main material: Aluminum
- Surface treatment: Black anodic oxide
- Withstand load: 49.0N (5.0kgf)
- Maximum moment capacity: 1.3N・m
- Moment stiffness: 1.5″/N・cm
- Parallelism: 50μm
- Eccentricity: 20μm
- Wobble: 20μm
- Mass: 0.4kg
- RoHS conform product
| Order No. | 61-6977-77 | |
|---|---|---|
| Model No. | KSP-786FP | |
| Standard price |
JPY: 25,800
USD: 160.53
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|