61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
FeaturesFeatures class="init">
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
Features
- An XZ axis stage that combines the X axis and flat Z axis stages of a ball guide.
- Stainless steel type (TSDS-254) is also available for vacuum applications.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Due to the structure of the Z-axis, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and use the Z-axis in the reverse direction.
- * Since the Z-axis is constructed by applying the principle of leverage, the feed amount relative to the scale is shifted (about ±0.02 mm for 0.5 mm/1 rotation of the micrometer head) depending on the position of the moving amount.
SpecSpec class="init">
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
特徴
- An XZ axis stage that combines the X axis and flat Z axis stages of a ball guide.
- Stainless steel type (TSDS-254) is also available for vacuum applications.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Due to the structure of the Z-axis, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and use the Z-axis in the reverse direction.
- * Since the Z-axis is constructed by applying the principle of leverage, the feed amount relative to the scale is shifted (about ±0.02 mm for 0.5 mm/1 rotation of the micrometer head) depending on the position of the moving amount.
仕様
- [
common specification]
- Table surface size: 25 x 25mm
- Movement amount: X axis ±3mm, Z axis ±3mm
- Movement guide: Ball guide
- Main material: Iron
- Surface treatment: Super black chrome + black brushed
- Movement accuracy/straightness: 5μm
- Permissible moment load/pitch: 1.0N・m
- Permissible moment load/roll: 1.0N・m
- Moment rigidity/pitch: 8.95″/N・cm
- Moment rigidity/roll: 8.75″/N・cm
- Parallelism: 110μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Withstand load: 29.4N (3.0kgf)
- Mass: 0.17kg
- RoHS conform product
-
Order No.
61-6974-72
Model No.
TSD-254SR
Standard price
JPY: 66,700
USD: 418.10
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
QuantityQuantityass="init">
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
特徴
- An XZ axis stage that combines the X axis and flat Z axis stages of a ball guide.
- Stainless steel type (TSDS-254) is also available for vacuum applications.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Due to the structure of the Z-axis, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and use the Z-axis in the reverse direction.
- * Since the Z-axis is constructed by applying the principle of leverage, the feed amount relative to the scale is shifted (about ±0.02 mm for 0.5 mm/1 rotation of the micrometer head) depending on the position of the moving amount.
仕様
- [
common specification]
- Table surface size: 25 x 25mm
- Movement amount: X axis ±3mm, Z axis ±3mm
- Movement guide: Ball guide
- Main material: Iron
- Surface treatment: Super black chrome + black brushed
- Movement accuracy/straightness: 5μm
- Permissible moment load/pitch: 1.0N・m
- Permissible moment load/roll: 1.0N・m
- Moment rigidity/pitch: 8.95″/N・cm
- Moment rigidity/roll: 8.75″/N・cm
- Parallelism: 110μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Withstand load: 29.4N (3.0kgf)
- Mass: 0.17kg
- RoHS conform product
-
アズワン品番
61-6974-72
型番
TSD-254SR
標準価格
JPY: 66,700
USD: 418.10
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
Stock in JapanASONEs="init">
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
Features
- An XZ axis stage that combines the X axis and flat Z axis stages of a ball guide.
- Stainless steel type (TSDS-254) is also available for vacuum applications.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Due to the structure of the Z-axis, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and use the Z-axis in the reverse direction.
- * Since the Z-axis is constructed by applying the principle of leverage, the feed amount relative to the scale is shifted (about ±0.02 mm for 0.5 mm/1 rotation of the micrometer head) depending on the position of the moving amount.
Spec
- [
common specification]
- Table surface size: 25 x 25mm
- Movement amount: X axis ±3mm, Z axis ±3mm
- Movement guide: Ball guide
- Main material: Iron
- Surface treatment: Super black chrome + black brushed
- Movement accuracy/straightness: 5μm
- Permissible moment load/pitch: 1.0N・m
- Permissible moment load/roll: 1.0N・m
- Moment rigidity/pitch: 8.95″/N・cm
- Moment rigidity/roll: 8.75″/N・cm
- Parallelism: 110μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Withstand load: 29.4N (3.0kgf)
- Mass: 0.17kg
- RoHS conform product
-
Order No.
61-6974-72
Model No.
TSD-254SR
Standard price
JPY: 66,700
USD: 418.10
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6974-70
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254C
TSD-254C
1piece
JPY: 66,700
USD: 418.10
61-6974-71
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254S
TSD-254S
1piece
JPY: 66,700
USD: 418.10
61-6974-72
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
TSD-254SR
1piece
JPY: 66,700
USD: 418.10
61-6974-73
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254CFP
TSD-254CFP
1piece
JPY: 60,700
USD: 380.49
61-6974-74
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SFP
TSD-254SFP
1piece
JPY: 60,700
USD: 380.49
61-6974-75
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SRFP
TSD-254SRFP
1piece
JPY: 60,700
USD: 380.49
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
Features
- An XZ axis stage that combines the X axis and flat Z axis stages of a ball guide.
- Stainless steel type (TSDS-254) is also available for vacuum applications.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Due to the structure of the Z-axis, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and use the Z-axis in the reverse direction.
- * Since the Z-axis is constructed by applying the principle of leverage, the feed amount relative to the scale is shifted (about ±0.02 mm for 0.5 mm/1 rotation of the micrometer head) depending on the position of the moving amount.
SpecSpec class="init">
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
特徴
- An XZ axis stage that combines the X axis and flat Z axis stages of a ball guide.
- Stainless steel type (TSDS-254) is also available for vacuum applications.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Due to the structure of the Z-axis, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and use the Z-axis in the reverse direction.
- * Since the Z-axis is constructed by applying the principle of leverage, the feed amount relative to the scale is shifted (about ±0.02 mm for 0.5 mm/1 rotation of the micrometer head) depending on the position of the moving amount.
仕様
- [
common specification]
- Table surface size: 25 x 25mm
- Movement amount: X axis ±3mm, Z axis ±3mm
- Movement guide: Ball guide
- Main material: Iron
- Surface treatment: Super black chrome + black brushed
- Movement accuracy/straightness: 5μm
- Permissible moment load/pitch: 1.0N・m
- Permissible moment load/roll: 1.0N・m
- Moment rigidity/pitch: 8.95″/N・cm
- Moment rigidity/roll: 8.75″/N・cm
- Parallelism: 110μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Withstand load: 29.4N (3.0kgf)
- Mass: 0.17kg
- RoHS conform product
-
Order No.
61-6974-72
Model No.
TSD-254SR
Standard price
JPY: 66,700
USD: 418.10
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
QuantityQuantityass="init">
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
特徴
- An XZ axis stage that combines the X axis and flat Z axis stages of a ball guide.
- Stainless steel type (TSDS-254) is also available for vacuum applications.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Due to the structure of the Z-axis, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and use the Z-axis in the reverse direction.
- * Since the Z-axis is constructed by applying the principle of leverage, the feed amount relative to the scale is shifted (about ±0.02 mm for 0.5 mm/1 rotation of the micrometer head) depending on the position of the moving amount.
仕様
- [
common specification]
- Table surface size: 25 x 25mm
- Movement amount: X axis ±3mm, Z axis ±3mm
- Movement guide: Ball guide
- Main material: Iron
- Surface treatment: Super black chrome + black brushed
- Movement accuracy/straightness: 5μm
- Permissible moment load/pitch: 1.0N・m
- Permissible moment load/roll: 1.0N・m
- Moment rigidity/pitch: 8.95″/N・cm
- Moment rigidity/roll: 8.75″/N・cm
- Parallelism: 110μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Withstand load: 29.4N (3.0kgf)
- Mass: 0.17kg
- RoHS conform product
-
アズワン品番
61-6974-72
型番
TSD-254SR
標準価格
JPY: 66,700
USD: 418.10
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
Stock in JapanASONEs="init">
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
Features
- An XZ axis stage that combines the X axis and flat Z axis stages of a ball guide.
- Stainless steel type (TSDS-254) is also available for vacuum applications.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Due to the structure of the Z-axis, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and use the Z-axis in the reverse direction.
- * Since the Z-axis is constructed by applying the principle of leverage, the feed amount relative to the scale is shifted (about ±0.02 mm for 0.5 mm/1 rotation of the micrometer head) depending on the position of the moving amount.
Spec
- [
common specification]
- Table surface size: 25 x 25mm
- Movement amount: X axis ±3mm, Z axis ±3mm
- Movement guide: Ball guide
- Main material: Iron
- Surface treatment: Super black chrome + black brushed
- Movement accuracy/straightness: 5μm
- Permissible moment load/pitch: 1.0N・m
- Permissible moment load/roll: 1.0N・m
- Moment rigidity/pitch: 8.95″/N・cm
- Moment rigidity/roll: 8.75″/N・cm
- Parallelism: 110μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Withstand load: 29.4N (3.0kgf)
- Mass: 0.17kg
- RoHS conform product
-
Order No.
61-6974-72
Model No.
TSD-254SR
Standard price
JPY: 66,700
USD: 418.10
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
61-6974-70
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254C
TSD-254C
1piece
JPY: 66,700
USD: 418.10
61-6974-71
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254S
TSD-254S
1piece
JPY: 66,700
USD: 418.10
61-6974-72
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
TSD-254SR
1piece
JPY: 66,700
USD: 418.10
61-6974-73
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254CFP
TSD-254CFP
1piece
JPY: 60,700
USD: 380.49
61-6974-74
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SFP
TSD-254SFP
1piece
JPY: 60,700
USD: 380.49
61-6974-75
XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SRFP
TSD-254SRFP
1piece
JPY: 60,700
USD: 380.49
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR
特徴
- An XZ axis stage that combines the X axis and flat Z axis stages of a ball guide.
- Stainless steel type (TSDS-254) is also available for vacuum applications.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Due to the structure of the Z-axis, the springs in the stage may not be able to withstand the load and may stretch out, so it is not possible to install and use the Z-axis in the reverse direction.
- * Since the Z-axis is constructed by applying the principle of leverage, the feed amount relative to the scale is shifted (about ±0.02 mm for 0.5 mm/1 rotation of the micrometer head) depending on the position of the moving amount.
仕様
- [
common specification] - Table surface size: 25 x 25mm
- Movement amount: X axis ±3mm, Z axis ±3mm
- Movement guide: Ball guide
- Main material: Iron
- Surface treatment: Super black chrome + black brushed
- Movement accuracy/straightness: 5μm
- Permissible moment load/pitch: 1.0N・m
- Permissible moment load/roll: 1.0N・m
- Moment rigidity/pitch: 8.95″/N・cm
- Moment rigidity/roll: 8.75″/N・cm
- Parallelism: 110μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Withstand load: 29.4N (3.0kgf)
- Mass: 0.17kg
- RoHS conform product
| Order No. | 61-6974-72 | |
|---|---|---|
| Model No. | TSD-254SR | |
| Standard price |
JPY: 66,700
USD: 418.10
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | QuantityQuantityass="init">
61-6974-72 XZ Axis Flat Steel Stage Size 25 x 25mm TSD-254SR特徴
仕様
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|