61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S
Check the Series LineupCheck the Series Lineup"init">
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
SpecSpec class="init">
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S
Features
- A lightweight and highly accurate direct movement stage with a cross roller guide on the aluminum stage body.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Depending on the part that secures the micrometer head and the type of micrometer head, it may protrude from the upper surface of the stage.
- * Please note that depending on the shape of the specimen attached to the stage, it may not be possible to fix or secure the amount of movement.
SpecSpec class="init">
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S
特徴
- A lightweight and highly accurate direct movement stage with a cross roller guide on the aluminum stage body.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Depending on the part that secures the micrometer head and the type of micrometer head, it may protrude from the upper surface of the stage.
- * Please note that depending on the shape of the specimen attached to the stage, it may not be possible to fix or secure the amount of movement.
仕様
- [
common specification]
- Table surface size: 80 x 80mm
- Movement amount: ±7.5mm (however SDM, SWP are ±6.5mm)
- Movement guide: Crossed roller
- Main material: Aluminum
- Surface treatment: Black anodic oxide
- Withstand load: 392N(40.0kgf)
- Movement accuracy/straightness: 2μm
- Movement accuracy/pitching: 25″
- Movement accuracy/yawing: 15″
- Permissible moment load/pitch: 12.3N・m
- Permissible moment load/roll: 12.3N・m
- Permissible moment load/yaw: 14.7N・m
- Moment rigidity/pitch: 0.23″/N・cm
- Moment rigidity/roll: 0.23″/N・cm
- Moment rigidity/yaw: -
- Parallelism: 50μm
- Movement parallelism: 20μm
- Orthogonality: 10μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Mass: 0.9kg
- RoHS conform product
-
Order No.Order No.ss="init">
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S
特徴
- A lightweight and highly accurate direct movement stage with a cross roller guide on the aluminum stage body.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Depending on the part that secures the micrometer head and the type of micrometer head, it may protrude from the upper surface of the stage.
- * Please note that depending on the shape of the specimen attached to the stage, it may not be possible to fix or secure the amount of movement.
仕様
- [
common specification]
- Table surface size: 80 x 80mm
- Movement amount: ±7.5mm (however SDM, SWP are ±6.5mm)
- Movement guide: Crossed roller
- Main material: Aluminum
- Surface treatment: Black anodic oxide
- Withstand load: 392N(40.0kgf)
- Movement accuracy/straightness: 2μm
- Movement accuracy/pitching: 25″
- Movement accuracy/yawing: 15″
- Permissible moment load/pitch: 12.3N・m
- Permissible moment load/roll: 12.3N・m
- Permissible moment load/yaw: 14.7N・m
- Moment rigidity/pitch: 0.23″/N・cm
- Moment rigidity/roll: 0.23″/N・cm
- Moment rigidity/yaw: -
- Parallelism: 50μm
- Movement parallelism: 20μm
- Orthogonality: 10μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Mass: 0.9kg
- RoHS conform product
-
Order No.Order No.ss="init">
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
SIGMAKOKI CO., LTD.
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S
特徴
- A lightweight and highly accurate direct movement stage with a cross roller guide on the aluminum stage body.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Depending on the part that secures the micrometer head and the type of micrometer head, it may protrude from the upper surface of the stage.
- * Please note that depending on the shape of the specimen attached to the stage, it may not be possible to fix or secure the amount of movement.
仕様
- [
common specification]
- Table surface size: 80 x 80mm
- Movement amount: ±7.5mm (however SDM, SWP are ±6.5mm)
- Movement guide: Crossed roller
- Main material: Aluminum
- Surface treatment: Black anodic oxide
- Withstand load: 392N(40.0kgf)
- Movement accuracy/straightness: 2μm
- Movement accuracy/pitching: 25″
- Movement accuracy/yawing: 15″
- Permissible moment load/pitch: 12.3N・m
- Permissible moment load/roll: 12.3N・m
- Permissible moment load/yaw: 14.7N・m
- Moment rigidity/pitch: 0.23″/N・cm
- Moment rigidity/roll: 0.23″/N・cm
- Moment rigidity/yaw: -
- Parallelism: 50μm
- Movement parallelism: 20μm
- Orthogonality: 10μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Mass: 0.9kg
- RoHS conform product
-
アズワン品番
61-6971-18
型番
TAM-802S
標準価格
JPY: 75,900
USD: 475.77
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
61-6971-17
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802C
TAM-802C
1piece
JPY: 75,900
USD: 475.77
61-6971-18
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S
TAM-802S
1piece
JPY: 75,900
USD: 475.77
61-6971-19
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802SR
TAM-802SR
1piece
JPY: 75,900
USD: 475.77
61-6971-20
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802CFP
TAM-802CFP
1piece
JPY: 69,900
USD: 438.16
61-6971-21
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802CDM
TAM-802CDM
1piece
JPY: 129,900
USD: 814.27
61-6971-22
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802CWP
TAM-802CWP
1piece
JPY: 105,900
USD: 663.83
61-6971-23
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802SFP
TAM-802SFP
1piece
JPY: 69,900
USD: 438.16
61-6971-24
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802SDM
TAM-802SDM
1piece
JPY: 129,900
USD: 814.27
61-6971-25
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802SWP
TAM-802SWP
1piece
JPY: 105,900
USD: 663.83
61-6971-26
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802SRFP
TAM-802SRFP
1piece
JPY: 69,900
USD: 438.16
61-6971-27
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802SRDM
TAM-802SRDM
1piece
JPY: 129,900
USD: 814.27
61-6971-28
XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802SRWP
TAM-802SRWP
1piece
JPY: 105,900
USD: 663.83
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S
特徴
- A lightweight and highly accurate direct movement stage with a cross roller guide on the aluminum stage body.
- Products with FP at the end of the part number use fine pitch screws.
- Please note that this is not an ordinary micrometer head.
- When operating with a screw pitch of 0.25 mm, a hexagonal wrench or an optional hexagonal wrench with knob (KCL) is required.
- * Depending on the part that secures the micrometer head and the type of micrometer head, it may protrude from the upper surface of the stage.
- * Please note that depending on the shape of the specimen attached to the stage, it may not be possible to fix or secure the amount of movement.
仕様
- [
common specification] - Table surface size: 80 x 80mm
- Movement amount: ±7.5mm (however SDM, SWP are ±6.5mm)
- Movement guide: Crossed roller
- Main material: Aluminum
- Surface treatment: Black anodic oxide
- Withstand load: 392N(40.0kgf)
- Movement accuracy/straightness: 2μm
- Movement accuracy/pitching: 25″
- Movement accuracy/yawing: 15″
- Permissible moment load/pitch: 12.3N・m
- Permissible moment load/roll: 12.3N・m
- Permissible moment load/yaw: 14.7N・m
- Moment rigidity/pitch: 0.23″/N・cm
- Moment rigidity/roll: 0.23″/N・cm
- Moment rigidity/yaw: -
- Parallelism: 50μm
- Movement parallelism: 20μm
- Orthogonality: 10μm
- [Individual specification]
- Micro operation position: Side
- Movement amount/1 rotation: 0.5mm
- Micrometer minimum reading: 0.01mm
- Mass: 0.9kg
- RoHS conform product
Order No.Order No.ss="init">
61-6971-18 XY Axis Aluminum Crossed Roller Stage Size 80 x 80mm TAM-802S特徴
仕様
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|