This table top type vibration isolator can be used only on a table, laboratory table, etc., and is effective for space saving, small optical systems, microscopic observation systems, etc.
It is a vibration isolator that quickly attenuates vibration that is transmitted to the equipment and devices to be installed. It is indispensable as a mounting platform for equipment and devices that do not like the effect of vibration.
Vertical vibration isolation is performed by the precision air spring system.
The integral outer frame has excellent rigidity.
Also, since the mounting board is enclosed with a frame around the outer circumference, there is almost no effect on the mounting board if it accidentally comes in contact with the outer circumference frame during work.
A quiet type silent compressor (PC-10H-S) that can be used indoors is available when the compressor is installed in a place where there is no air source.
The watch may not function properly if it is loaded with an extremely biased load or equipment or equipment with an abnormally high center of gravity.
仕様
[ common specification]
Natural frequency (vertical direction): About 2.0 - 2.3Hz
Vibration prevention (vertical direction): Precision air spring
Control method: Air damping by orifice
Mounting plate used (part number suffix A): Lonleum*bonded to steel plate (non-magnetic)
Mounting plate used (part number suffix B): Steel plate black finish (magnetic)
Mounting plate used (part number suffix C): Upper plate: Magnetic Stainless Steel plate, thickness 5mm (unpainted), lower plate: Aluminum
Mounting plate used (part number suffix D): M6 tapped holes on 25 x 25mm matrix over the entire top surface of type C above
Mounting plate used (part number suffix E): M6 tapped holes on 25 x 25mm matrix over the entire top surface of type C above
Features: The manual leveling system is best suited for mounting instruments that do not change position or weight. The height of the bench is easily adjusted by operating the supply and exhaust valve. Air supply is provided with the accessory hand air pump, and no other air source is required.
Air supply: Manually supplied with the hand air pump
Air supply air pressure: ―
Horizontal maintenance: Manual adjustment by means of three supply and exhaust valves
Accessories: One hand air pump, One special rotation driver for supply and exhaust valve
*1MPa ? 10.197 kgf/cm2
*Lonleum... PVC as the main material, it is non-magnetic, but effective for stopping slippage of instruments on the mounting plate.
This table top type vibration isolator can be used only on a table, laboratory table, etc., and is effective for space saving, small optical systems, microscopic observation systems, etc.
It is a vibration isolator that quickly attenuates vibration that is transmitted to the equipment and devices to be installed. It is indispensable as a mounting platform for equipment and devices that do not like the effect of vibration.
Vertical vibration isolation is performed by the precision air spring system.
The integral outer frame has excellent rigidity.
Also, since the mounting board is enclosed with a frame around the outer circumference, there is almost no effect on the mounting board if it accidentally comes in contact with the outer circumference frame during work.
A quiet type silent compressor (PC-10H-S) that can be used indoors is available when the compressor is installed in a place where there is no air source.
The watch may not function properly if it is loaded with an extremely biased load or equipment or equipment with an abnormally high center of gravity.
Spec
[ common specification]
Natural frequency (vertical direction): About 2.0 - 2.3Hz
Vibration prevention (vertical direction): Precision air spring
Control method: Air damping by orifice
Mounting plate used (part number suffix A): Lonleum*bonded to steel plate (non-magnetic)
Mounting plate used (part number suffix B): Steel plate black finish (magnetic)
Mounting plate used (part number suffix C): Upper plate: Magnetic Stainless Steel plate, thickness 5mm (unpainted), lower plate: Aluminum
Mounting plate used (part number suffix D): M6 tapped holes on 25 x 25mm matrix over the entire top surface of type C above
Mounting plate used (part number suffix E): M6 tapped holes on 25 x 25mm matrix over the entire top surface of type C above
Features: The manual leveling system is best suited for mounting instruments that do not change position or weight. The height of the bench is easily adjusted by operating the supply and exhaust valve. Air supply is provided with the accessory hand air pump, and no other air source is required.
Air supply: Manually supplied with the hand air pump
Air supply air pressure: ―
Horizontal maintenance: Manual adjustment by means of three supply and exhaust valves
Accessories: One hand air pump, One special rotation driver for supply and exhaust valve
*1MPa ? 10.197 kgf/cm2
*Lonleum... PVC as the main material, it is non-magnetic, but effective for stopping slippage of instruments on the mounting plate.
